DEVICE_LOCATION (Windows CE 5.0)

  • Artikel

Send Feedback

This structure assigns an IRQ to a device through the IOCTL_HAL_REQUEST_IRQ IOCTL.

typedef struct _DEVICE_LOCATION {DWORD IfcType;
  DWORD BusNumber;
  DWORDLogicalLoc;
  PVOIDPhysicalLoc;
  DWORDPin;
} DEVICE_LOCATION, *PDEVICE_LOCATION;

Members

  • IfcType
    Element of the INTERFACE_TYPE enumeration. Typically, set to PCIBus.

  • BusNumber
    Bus number. Typically, the PCI bus number where the device is located.

  • LogicalLoc
    Logical location of device; the PCI slot and function numbers.

  • PhysicalLoc
    Reserved for future use.

  • Pin
    PCI bus interrupt pin number.

    The following table shows the possible values.

    Interrupt pin number Value
    INTA 1
    INTB 2
    INTC 3
    INTD 4

Remarks

This structure describes the location of a hardware device in terms of its interface, bus number, and logical location. It is typically used for describing PCI devices. The Pin member describes which pin (1 through 4) of a PCI device is being used for the interrupt.

The LogicalLoc member identifies the location of the device. The following table shows how the bits of the DWORD for the PCI bus are defined.

Bits Description
31 through 24 0
23 through 16 Bus number
15 through 8 Device number
7 through 0 Function number

Requirements

OS Versions: Windows CE .NET 4.0 and later.
Header: Pkfuncs.h.

See Also

INTERFACE_TYPE | IOCTL_HAL_REQUEST_IRQ

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.