HPE ProLiant DL20 Gen 11 (4SFF)

This article describes the HPE ProLiant DL20 Gen 11 appliance for OT sensors monitoring production lines.

The HPE ProLiant DL20 Gen11 is also available for the on-premises management console.

Appliance characteristic Details
Hardware profile E1800
Performance Max bandwidth: 1 Gbps
Max devices: 10,000
Physical specifications Mounting: 1U
Minimum dimensions (H x W x D) 1.70 x 17.11 x 15.05 in
Minimum dimensions (H x W x D) 4.32 x 43.46 x 38.22 cm
Status Supported, available pre-configured

Specifications

Component Technical specifications
Chassis 1U rack server
Physical Characteristics HPE DL20 Gen11 4SFF Ht Plg CTO Server
Processor Intel Xeon E-2434 3.4-GHz 4-core 55 W FIO Processor for HPE
Chipset Intel C262
Memory HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800 CAS-40-39-39
Unbuffered Standard Memory
Storage HPE 1.2 TB SAS 12 G Mission Critical 10 K SFF
Network controller On-board: 2 x 1 Gb
External 1 x HPE Ethernet 1-Gb 4-port 366FLR Adapter
On-board On-board: 4x 1 Gb
Management HPE iLO Advanced
Device access Front: One USB 3.0 1 x USB iLO Service Port
Rear: Two USBs 3.0
External 1 x Broadcom BCM5719 Ethernet 1 Gb 4-port BASE-T Adapter for HPE
Internal One USB 3.2
Power HPE 1,000 W Flex Slot Titanium Hot Plug Power Supply Kit
Rack support HPE 1U Short Friction Rail Kit

DL20 Gen11 (4SFF) - Bill of materials

Quantity PN Description
1 P65392-B21 HPE ProLiant DL20 Gen 11 4SFF Hot Plug Configure-to-order Server
1 P65392-B21 B19 HPE DL20 Gen11 4SFF Ht Plg CTO Server
1 P65224-B21 Intel Xcon E-2434 3.4-GHz 4-core 55 W FIO Processor for HPE
2 P64336-B21 HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800 CAS-40-39-39 Unbuffered Standard Memory Kit
4 P28586-B21 HPE 1.2 TB SAS 12 G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD
1 P52753-B21 HPE ProLiant DL320 Genll x 16 FHHL Riser Kit
1 P51178-B21 Broadcom BCM5719 Ethernet 1-Gb 4-port BASE-T Adapter for HPE
1 P47789-B21 HPE MRi-o Gen11 x 16 Lanes without Cache OCP SPDM Storage Controller
2 P03178-B21 HPE 1,000 W Flex Slot Titanium Hot Plug Power Supply Kit
1 BD505A HPE iLO Advanced 1-server License with 3 yr Support on iLO Licensed Features
1 P65412-B21 HPE ProLiant DL20 Gen11 2LFF/4SFF OCP Cable Kit
1 P64576-B21 HPE Easy Install Rail 12 Kit
1 P65407-B21 HPE ProLiant DL20 Gen 11 LP iLO/M.2 Enablement Kit

Install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (4SFF)

This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen 11 (4SFF).

The installation process takes about 20 minutes. After the installation, the system is restarted several times.

To install Defender for IoT software:

  1. Connect the screen and keyboard to the appliance, and then connect to the CLI.

  2. Connect an external CD or disk-on-key that contains the software you downloaded from the Azure portal.

  3. Start the appliance.

  4. Continue with the generic procedure for installing Defender for IoT software. For more information, see Defender for IoT software installation.

Next steps

Continue learning about the system requirements for physical or virtual appliances. For more information, see Which appliances do I need?.

Then, use any of the following procedures to continue: