Hello, Hello, I tried to configure and set up a connection between two vwans. Below are the design details. Two Vnets in two different regions (Vnet-A and Vnet-B). VNEt-A: 10.40.0.0/24 | Vnet-B: 10.60.0.0.0/24 2. Two Virtual hubs (vHu-A: 192.168.10.0/24 and vHub-B: 192.168.20.0) 3. Configured VPN sites under the HUB. Configured the S2S rather than Express route as this is Lab scenario. Created a GW and also LNG as suggested by Co-Pilot. Configured Route table and associated as well as Propagated. Attached are the screen shots as I am getting " Instance0:Notconnected and Instance1:NotConnected' Please provide me a solution so that I can complete the Lab and also the connectivity part. I am missing something which is stopping me to configure the connection. "Connected Hub: Not connected" Thanks in advance, Raja V

"Azure Virtual Wans - vwans | Connection Status of the HUb: NOT CONNECTED"

Raja Sheker Vuttham 20

Hello,

I tried to configure and set up a connection between two vwans. Below are the design details.

Two Vnets in two different regions (Vnet-A and Vnet-B).

VNEt-A: 10.40.0.0/24 | Vnet-B: 10.60.0.0.0/24 2. Two Virtual hubs (vHu-A: 192.168.10.0/24 and vHub-B: 192.168.20.0) 3. Configured VPN sites under the HUB.

Configured the S2S rather than Express route as this is Lab scenario. Created a GW and also LNG as suggested by Co-Pilot.
Configured Route table and associated as well as Propagated. Attached are the screen shots as I am getting " Instance0:Notconnected and Instance1:NotConnected'

Please provide me a solution so that I can complete the Lab and also the connectivity part. I am missing something which is stopping me to configure the connection.

"Connected Hub: Not connected"

Thanks in advance,

Raja V 2. VPN-A Sites Status

3. VPN Sites - Status

4. Virtual Network Connections-vwanA-Status

5. Routing configuration status

6. vwan-B Status

7. VPN Site-B status

8. vhub-B -status

9. Route table status

10. Instance0 connected status- not connected

11. Site Details and Private Adddress space

Propagation of the ROutes in VWAN configuration

ChaitanyaNaykodi-MSFT 25,841 Reputation points Microsoft Employee

2024-08-20T14:56:06.84+00:00

@Raja Sheker Vuttham

Thank you for reaching out.

Can you share a network diagram of your set-up here? it will help troubleshoot the issue.

Meanwhile you can also check if you selected the supported IPsec policy in your set-up here. Setting up diagnostic logging can also help troubleshoot the issue. Thanks
Raja Sheker Vuttham 20 Reputation points

2024-08-20T15:32:41.7366667+00:00

@ChaitanyaNaykodi Unfortunately, I deleted the Resource group. Anyhow I will give a try tomorrow again and will provide the Network Diagram /topologyg.

Thanks,

Raja V
Raja Sheker Vuttham 20 Reputation points

2024-08-20T15:33:58.8166667+00:00

I hope you have understood the issue. What shall be implemented in between so as to let the connections Up and running. Is that the Routing part or something else.

Thanks
Raja Sheker Vuttham 20 Reputation points

2024-08-22T08:06:11.8033333+00:00
I changed the design and implemented the below:

Two Vnets:

vnet-a and Vnet-b

vnet-a: 10.40.0.0/24 (central India)

vnet-b: 10.50.0.0/24 (South India)

virtual hub: 192.168.10.0/24

All I need to establish the connectivity between the two vnets using the vwan in between and also S2S VPN.
As this is a Lab, I am considering the vnet-a as "On-premises "and vnet-b as "my envi"

Attached is the topology after configuration.
Everything is success and provisioned, but VPN connectivity is still failing.

Thank You,

Raja V

Share via

"Azure Virtual Wans - vwans | Connection Status of the HUb: NOT CONNECTED"

Your answer