This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(262.40000000000003, 2%, 35%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EJP%3C/text%3E%3C/svg%3E)
We have new power edge R740 servers, these new servers have Fiber Channel cards installed and use Qlogic drivers. We also have a Windows image that works with our other Dell servers including our Dell power edge R740 servers that do not have Fiber channel cards and use Broadcom drivers.
During the Network configuration section within our build iso it does not detect the NIC's on the Dell power edge R740 with fiber channel servers, The QLogic drivers are present within the build process same with the Broadcom drivers.
Any thoughts on how I can get this fixed so I can push our image to the server from the network? Does the FC need to be disabled before we do the OS push? If so what is the process to accomplish this?
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(128, 8%, 22%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EA%3C/text%3E%3C/svg%3E)
May need to ask Dell about this or ask in their hardware forums.
https://www.dell.com/community/PowerEdge-Hardware-General/bd-p/PowerEdge-General-HW
--please don't forget to Accept as answer if the reply is helpful--
I'd check the chipset has been installed.
https://www.dell.com/support/home/en-us/product-support/product/poweredge-r740/drivers
the chipset allows the operating system to find and use devices integrated into the motherboard.
--please don't forget to Accept as answer if the reply is helpful--
The Chipset is present and detecting everything else, the NICs in question are joined to PCIe slots. I am however reviewing the drivers in detail for these specific NICS to see if they are present within our process.
After review of our installation process it was found that we do not have the drivers for:
QL41112-DE 10 Gigabit Ethernet
We downloaded them from the link below but they are not associating properly, any recommendations on where I can get a valid download of these drivers so I can associate them to our build using the Microsoft MDT tool set?