Azure Stack Installation with Windows Admin Center and NetworkATC

Hello, I tried today the Azure Stack HCI installation over the WAC and with Network ATC configuration (recommended from MS).

I have in summary 5 NICs.
1 Gb NIC for ded. WAC communication. Only this NIC has an IP Address with Gateway and DNS configuration.
2 x 10 Gb NICs for Management and Compute (SET).
2 x 25 Gb NICs for Storage traffic (RoCE)

I've configured in WAC in Network ATC 2 intents.
Intent 1 for Compute and Management.
Inten 2 for Storage.

I've selected the 2x 10Gb NICs for Intent 1. More options are not available.
I've selected the 2x 25Gb NICs for Storage and could configure all data such as VLANs, IPs for each Storage NICs.

After that step comes the cluster creation, but only with an APIPA cluster IP.
Configure and create the WAC Network ATC not the SET and the virtual IP Address for Management?

I tried then the manual classic steps without Network ATC but I can't choose the Management over both NICs in a SET team (it is greyed out).
It is necessary that all Manament IPs have a temporary vaild IP Address with Gateway and DNS settings?