Virtual Machine Manager Error Codes (0-499)

  • Article

Links to other error code pages can be found on the Virtual Machine Manager (VMM) 2008 R2 Error Codes page.

To find a specific error message in this table, type Ctrl-F and enter the error code. If you have additional information about how to fix an error, add it to the "Additional Troubleshooting Information" column.

Code

Message

Recommended Action (in product)

Additional Troubleshooting Information 

200

Cannot connect to the service %ServiceName;.

Check the Windows Event Log for troubleshooting information.

201

Cannot ensure configuration of the service %ServiceName;.

Check the Windows Event Log for troubleshooting information.

202

Cannot connect to the Service Control Manager (SCM).

Check the Windows Event Log for troubleshooting information.

203

VMM cannot start the service %ServiceName; service.

Run services.msc, select and right-click the service %ServiceName;, and then click Start.

204

VMM cannot stop the %ServiceName; service.

Run services.msc, select and right-click the service %ServiceName;, and then click Stop.

205

System Center Virtual Machine Manager was not installed successfully.

Review the error log information and then try running Setup again.

206

Setup was unable to receive the system configuration.

Ensure that the Windows Management Instrumentation service is running, and then try the operation again.

208

Another instance of System Center Virtual Machine Manager 2008 R2 Setup is running.

Close all open instances of the Virtual Machine Manager Setup program and then try the installation again.

209

The Setup log file path %FileName; is not valid.

Select a valid Application Data folder path, and then try the operation again.

210

Setup cannot create the file %FileName;.

Verify that Setup has permission to create the file, and then try the operation again.

211

The Setup log file path %FileName; is too long.

Verify that the Application Data folder path has fewer than 260 characters, and then run Setup again.

212

The configuration data for this product is corrupted.

Contact your support personnel for further help.

213

Setup cannot read the file %FileName;.

Ensure that Setup has permissions to read the file, and then try the operation again.

214

The computer does not meet the minimum processor configuration requirements to run Virtual Machine Manager. The minimum required processor speed is %ProcessorClockSpeed; MHz.

Either upgrade the processor speed in the computer or install Virtual Machine Manager on a different computer that meets the hardware requirements.

215

This computer does not meet the minimum memory requirements to run Virtual Machine Manager. The minimum memory required is %MemoryMinRequired; MB; and the recommended memory is %MemoryRecommended; MB.

Either upgrade the amount of memory in the computer or install Virtual Machine Manager on a different computer that meets the hardware requirements.

216

This computer does not meet the recommended amount of memory.

The recommended amount of memory for optimal performance is %MemoryRecommended; MB. Either upgrade the amount of memory in the computer or install Virtual Machine Manager on a different computer that meets the hardware requirements.

217

The remote SQL Server administrator credentials provided are not valid.

Ensure that the remote SQL Server administrator credentials are valid, and then try the operation again.

220

This computer is not part of a domain.

Virtual Machine Manager requires a computer that is a member of a domain. Join this computer to a domain, and then run Setup again.

221

There is insufficient disk space on the system volume %SystemVolumeDriveLetter; to complete the installation.

Create %SystemDiskSpaceRequired; MB of disk space on the system volume to continue with the installation.

222

There is insufficient disk space on the program files volume %BinaryVolumeDriveLetter; to complete the installation.

Create %BinaryDiskSpaceRequired; MB of disk space on the volume to continue with the installation.

223

There is insufficient disk space on the database volume %DatabaseVolumeDriveLetter; to complete the installation.

Create %DatabaseDiskSpaceRequired; MB of disk space on the volume to continue with the installation.

224

Setup has detected instance MICROSOFT$VMM$ running on an older version of SQL Express 2005.

Uninstall MICROSOFT$VMM$ and then run Virtual Machine Manager Setup again to install SQL Express 2005 Service Pack 3.

225

Setup has detected SQL instance %SqlInstance; on the local server.

Select "Use an existing SQL Server instance", and then try the operation again.

226

%ProductName; Beta is currently installed.

To upgrade %ProductName;, refer to the upgrade documentation at http://go.microsoft.com/fwlink/?LinkId=117133. To perform a new installation, uninstall all Beta Virtual Machine Manager components and then install Virtual Machine Manager 2008 R2.

227

The required service %ServiceName; is disabled.

Enable the service and then run Setup again.

228

A different version of %ProductName; is currently installed.

Uninstall the existing %ProductName; from Add/Remove Program and then run Setup again.

229

System Center Virtual Machine Manager requires Windows PowerShell 1.0 or 2.0.

To download Windows PowerShell 1.0, go to http://go.microsoft.com/fwlink/?LinkId=77521.

230

Virtual Machine Manager cannot be successfully installed because service %ServiceName; is marked for deletion.

Reboot the server, and then run Setup again.

231

The SQL Server instance %SqlInstance; is not supported.

Use a Microsoft SQL Server 2005 SP3 instance, and then continue with Setup.

233

The SQL Server database %DatabaseName; is currently in use by another program or process.

Select another database and try again.

234

The existing Virtual Machine Manager database is not accessible.

Ensure that SQL instance %SqlInstance; is installed properly and running. Also ensure that %DatabaseName; is accessible.

235

Setup has detected a database that is not compatible with the version being installed.

Delete %DatabaseName; from SQL instance %SqlInstance; and then continue with Setup.

236

System Center Virtual Machine Manager requires Internet Information Services (IIS).

To enable Internet Information Services (IIS) for Windows Server 2003, you must add the Windows Server IIS 6.0 component.\n\nTo enable IIS for Windows Server 2008, you must add the Web Server (IIS) role and enable the ASP.NET, IIS 6 Metabase Compatibility and IIS 6 WMI Compatibility server role services.

239

Setup has detected an unsupported version of Microsoft WinFX Runtime Components or .NET Framework 3.0.

Uninstall the existing version, and then run Setup again.

240

Setup has detected an unsupported version of Windows PowerShell. System Center Virtual Machine Manager requires Windows PowerShell 1.0 or 2.0.

Uninstall the existing version of Windows PowerShell, and then to download Windows PowerShell 1.0, go to http://go.microsoft.com/fwlink/?LinkId=77521.

241

Disk space cannot be calculated.

Select a different installation location, and then try the operation again.

242

VMM cannot read the Virtual Machine Manager installation path registry key. Some folders cannot be deleted.

View the error log for a complete list of folders, and delete those folders manually.

243

System Center Virtual Machine Manager requires Windows Remote Management (WinRM) 1.1.

To download WinRM 1.1, go to http://go.microsoft.com/fwlink/?LinkId=84599.

244

The Windows Remote Management (WinRM) service is not running on the computer.

Verify that WinRM service is running, and then try the operation again.

245

SQL service %ServiceName; is not running on the computer.

Verify that service %ServiceName; is running, and then try the operation again.

246

The World Wide Web Publishing Service is not running on the computer.

Verify that World Wide Web Publishing Service is running, and then try the operation again.

247

Setup has detected an unsupported version of Windows Remote Management (WinRM). Virtual Machine Manager requires WinRM 1.1.

To download WinRM 1.1, go to http://go.microsoft.com/fwlink/?LinkId=84599.

248

VMM server connection port cannot be 0.

Enter a valid port number.

249

Agent connection port and file transfer port cannot be of the same number.

Enter different port numbers.

250

System Center Virtual Machine Manager Workgroup Edition cannot manage more than five hosts. The specified Virtual Machine Manager database exceeds this limit.

Specify a new database or a VMM database that contains a maximum of five hosts. To manage more than five hosts, upgrade VMM Workgroup Edition. For information about upgrading, go to http://go.microsoft.com/fwlink/?LinkId=117133.

256

VMM cannot load the file %FileName;. The file may be corrupted or missing.

Run the Virtual Machine Manager Setup program directly from the product CD. If the setup program from the CD fails, obtain a new copy of the CD from your vendor.

257

An error has occurred while trying to configure Virtual Machine Manager.

Uninstall Virtual Machine Manager from Add or Remove Programs and then run Setup again.

260

The product key is not valid.

The product key is located on the back of the Virtual Machine Manager product CD. Enter a valid product key and then try installation again.

261

The parameter %InputParameterTag; is missing.

Select a value for the parameter.

262

%InputParameterTag; is empty or it exceeds %MaxLimit; characters.

Enter a valid input, and then try the operation again.

263

%InputParameterTag; exceeds %MaxLimit; characters.

Enter a valid input, and then try the operation again.

264

%InputParameterTag; is neither 1 nor 0.

Enter either 1 or 0, and then try the operation again.

266

The path %FileName; exceeds %MaxLimit; characters.

Enter a shorter path name, and then try the operation again.

267

Installation source %FolderPath; for installing prerequisites does not exist, cannot be accessed, or Setup cannot find one or more prerequisite CDs at the location.

Ensure that the prerequisite CDs are copied correctly, and run Setup again.

268

Not all database files from a previous installation were found at %Location;.

Delete the existing file or choose an alternative location for your database.

269

There is not enough disk space for %InstallItem;.

Create additional disk space on this disk, or choose a different location, and then try the operation again.

270

The location cannot be on removable media or a network share.

Select a different location, and then try the operation again.

271

The attributes of directory %DirectoryPath; cannot be acquired.

Select a different installation location, and then try the operation again.

272

The selected location %DirectoryPath; is read-only, hidden, a system folder, or a root volume.

Select a different location, and then try the operation again.

273

The selected location %DirectoryPath; is on a compressed volume.

Select a different location.

274

The directory %DirectoryPath; is not on an NTFS volume.

Install prerequisite software and Virtual Machine Manager on an NTFS volume, and then try the operation again.

275

The volume information for directory %DirectoryPath; cannot be acquired.

Select a different installation location, and then try the operation again.

276

The parameter %CommandlineArgument; is not valid.

See "Installing Virtual Machine Manager" in the Virtual Machine Manager Setup help for information about parameter usage.

277

The parameter %CommandlineArgument; is already specified.

See "Installing Virtual Machine Manager" in the Virtual Machine Manager setup help for information about parameter usage.

278

The parameter %CommandlineArgument; does not have a value associated with it.

See "Installing Virtual Machine Manager" in the Virtual Machine Manager Setup help for information about the specific parameter.

279

The specified path %FileName; is not valid.

Select a valid path and verify the path is accessible. Try the operation again.

280

The passwords entered do not match.

Enter the passwords again, and then try the operation again.

281

A reboot is required to complete the deletion of the service %ServiceName;.

Reboot the machine.

282

The evaluation copy of System Center Virtual Machine Manager has expired.

For details about obtaining a license, go to the System Center Virtual Machine Manager Web site at http://go.microsoft.com/fwlink/?LinkId=117146.

284

Setup has detected an existing installation of Virtual Machine Manager on this computer.

To install Virtual Machine Manager, uninstall the existing version, and then run Setup again.

285

%InputParameterTag; must be an integer between 0 and 65535.

Enter the port number again.

288

This program is for internal Virtual Machine Manager use only.

To launch the Virtual Machine Manager Setup program, run Setup.exe in the parent directory of the product CD.

289

The .ini file is not specified in the command line.

For more information, see "Installing Virtual Machine Manager" in the Virtual Machine Manager Setup help.

290

Virtual Machine Manager failed to uninstall.

Review the error details for information on the failure and how to remediate it. Once the failure has been resolved, try the uninstallation again.

292

Configuration of Virtual Machine Manager failed.

For more information about configuration, see "Troubleshooting" in the Virtual Machine Manager Setup help.

293

Setup could not remove the shortcuts to the Virtual Machine Manager Administrator Console from: %CommaSeparatedShortcutLocations;.

Delete the shortcuts manually.

294

Setup was unable to remove Virtual Machine Manager from the Windows Firewall exceptions list.

If Windows Firewall is enabled, remove Virtual Machine Manager from the exceptions list. In Control Panel, click Windows Firewall, click the Exceptions tab, and remove from the list of exceptions.

296

Setup was unable to delete the database %DatabaseName; from SQL instance %SqlInstance; on server %ServerName;.

Delete the database manually.

297

The requested action cannot be specified by using the command line.

For more information, see "Installing Virtual Machine Manager" in the Virtual Machine Manager Setup help.

298

Share %ShareName; already exists.

Enter a different name for the library share.

299

Share %ShareName; does not exist on the VMM server.

Enter the name of an existing share.

300

Setup was unable to delete the SQL login %SqlLoginName; from SQL instance %SqlInstance; on server %ServerName;.

Delete the login manually.

303

The folder %FolderPath; cannot be deleted.

Delete the folder manually.

304

Administrative privileges are required to install System Center Virtual Machine Manager.

To run Setup as an administrator, right-click Setup.exe, click "Run as", and then enter the credentials for a user account with administrative privileges.

305

Virtual Machine Manager cannot be installed on a computer running this operating system.

Install Virtual Machine Manager on a computer running Windows Server 2003 R2.

306

Virtual Machine Manager has detected an older version of Microsoft .NET Framework.

Install Microsoft .NET Framework 2.0 or the most current version and then run Setup again.

307

The folder %FolderPath; cannot be created. The folder may already exist.

Delete the folder if it exists, and then run Setup again.

308

Virtual Machine Manager is not installed on this computer.

For more information about installation, see "Installing Virtual Machine Manager" in the Virtual Machine Manager Setup help.

309

Either the existing Virtual Machine Manager database could not be accessed, or the database is corrupted.

Restore to a valid database and ensure that the SQL Server service is running. Run Setup again.

310

Virtual Machine Manager is already installed on this computer.

To uninstall Virtual Machine Manager, go to Add or Remove Programs and select uninstall.

311

The prerequisite check was not successful.

View the errors in the Virtual Machine Manager Setup log file %SetupLogFile;, view the errors and make the required changes. Run Setup again.

312

Setup could not delete the shortcuts to the Virtual Machine Manager Administrator Console from: %CommaSeparatedShortcutLocations;.

Delete the shortcuts manually.

313

Active Directory Domain Services cannot validate user %UserName;.

Check the network connectivity to the Domain Controller, and then run Setup again. If the problem persists, contact your network administrator.

314

Setup could not delete the service %ServiceName;.

Service %ServiceName; must be manually deleted.

316

Setup could not configure the firewall exceptions.

If the configuration is being run from OEM Setup, verify that Setup has the necessary privileges to configure firewall exceptions, and then run the configuration again. Otherwise, uninstall the VMM server and then install it again.

317

Setup has detected an existing database but cannot retrieve the physical location of the Virtual Machine Manager database from SQL Server instance %SqlInstance;.

Verify that SQL Server is installed properly and that the SQL Server service %ServiceName; is running.

319

The Virtual Machine Manager database was not created.

The Virtual Machine Manager database was not created. Delete %DatabaseName;.mdf and %DatabaseName;_log.ldf if they exist at %FolderPath; or use a unique name for the database. Also, verify that disk quota management is not enabled for the drive where the database is being created. Then run Setup again.

320

Setup could not delete the Virtual Machine Manager database.

Manually delete %DatabaseName; from SQL instance %SqlInstance;.

321

Database files in %DataFilesCompleteLocation; could not be removed.

Delete the files manually.

322

Cannot locate the file SqlCmd.exe.

Install the SQL Client Tools and then run Setup again.

323

The Virtual Machine Manager database was not created from the existing database files.

Delete the existing files or choose another location for the database.

325

Cannot enable the service %ServiceName;.

Enable the service in the Services MMC snapin by running "services.msc", find the service %ServiceName;, and verify that the service is enabled.

326

Cannot create service %ServiceName;.

Reboot the computer, uninstall Virtual Machine Manager, and then run Setup again.

327

Setup could not delete service %ServiceName;.

Delete the service manually.

328

Setup was unable to configure service %ServiceName;.

Check the Windows Event Log for troubleshooting information.

329

Could not install the necessary Setup files from %SourceLocation; to %InstallLocation;.

Ensure that Setup has access to the installation location.

330

Cannot delete necessary setup files from %InstallLocation;.

Delete the files manually.

331

Cannot mark necessary Setup files at %FolderPath; for deletion.

Delete the files manually after Virtual Machine Manager Setup is complete.

332

VMM cannot start Setup.

Run Setup from the product CD. If you are running it from the CD already, the CD is corrupted. Request a new CD from your administrator.

334

Setup could not configure the database %DatabaseName;.

Ensure service %ServiceName; is started by running "services.msc", find the service, and then verify that the service is started.

336

Setup could not query the Web site setting.

Ensure that the IIS Admin Service is running and then try running VMM Self-Service Portal Setup again. If you are installing the portal on a computer that is running Windows Server 2008, also ensure that the Web Server (IIS) role is added and that the IIS 6 Management Compatibility role service is installed.

337

Web site %SiteName; has the same address binding as the specified port.

Enter a different port or a custom host header for the portal, or delete the conflicting Web site. Then try the operation again.

339

Setup cannot connect to the specified SQL Server instance.

Ensure that the server name and instance name are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.

342

%Prerequisite; installation has failed.

Manually install %Prerequisite;.

343

%Prerequisite; installation has failed. For error detail, see %SetupLogFile;.

Manually install %Prerequisite;.

344

The file %FileName; cannot be deleted.

You may not have permission to delete the file, or the file is locked by another application. Manually delete the file after completing the Setup program.

346

Cannot access the registry key %RegistryKey; for the Microsoft SQL Server instance %SqlInstance;.

Verify that the SQL 2005 instance is installed and configured correctly.

348

An error has occurred while trying to connect to database %DatabaseName;.

Ensure that the SQL Server service %ServiceName; can be started and that you have permissions to query the SQL Server.

350

Setup cannot write to file %FileName;.

Delete the file if it exists, and then run Setup again.

351

An error has occurred while trying to delete database %DatabaseName;.

Manually delete %DatabaseName; from SQL instance %SqlInstance;.

358

Setup was unable to set permissions on folder %DirectoryPath;.

Ensure that the folder %DirectoryPath; is a valid location and that the current user has permission to access the location.

359

Setup cannot connect to the SQL Server %ComputerName;.

Ensure that the server name is correct and that it is connected to the network.

360

Setup cannot find a SQL Server instance on %ComputerName;.

Verify that SQL Server 2005 is properly installed and that the SQL Server service is running.

361

The SQL database %DatabaseName; already exists.

Either clear the "Create a new database" check box to use the existing database, or type a new database name and then try the operation again.

362

The SQL database %DatabaseName; does not exist.

Check the "Create a new database" check box to create a new database, or use an existing database.

363

The Virtual Machine Manager database could not be upgraded.

Uninstall the Virtual Machine Manager server selecting the "Retain data" option, and then try installing the Virtual Machine Manager server again.

364

Setup cannot find a database in the SQL Server instance %SqlInstance;.

Select the "Create a new database" check box to create the database, or select another SQL Server instance.

365

System Center Virtual Machine Manager is not preinstalled on this computer.

For more information about installing Virtual Machine Manager go to http://go.microsoft.com/fwlink/?LinkId=117338.

366

System Center Virtual Machine Manager requires the Windows Automated Installation Kit (WAIK) to be installed.

To download the Windows Automated Installation Kit, go to http://www.microsoft.com/downloads/details.aspx?familyid=94BB6E34-D890-4932-81A5-5B50C657DE08.

367

Setup has detected an unsupported version of Windows Installer.

To install the correct version of Windows Installer, go to http://go.microsoft.com/fwlink/?LinkId=117300.

368

To continue, your computer must be restarted.

Cancel the Virtual Machine Manager server setup, restart the computer, and then run the Virtual Machine Manager server setup again.

369

Run command %FileName; with argument %CommandlineArgument; failed.

Verify that the command and arguments are correct and then run Virtual Machine Manager server setup again.

370

The VMM Self-Service Portal requires the IIS 6 Management Compatibility role service.

Open Server Manager, select the Web Server (IIS) role, click "Add Role Services", and then install the IIS 6 Management Compatibility role service.

371

The VMM Self-Service Portal requires Web Server (IIS) role services that are not installed.

Open Server Manager, select the Web Server (IIS) role, and ensure that the following role services are installed; Static Content, Default Document, Directory Browsing, HTTP Errors, ASP.NET, .NET Extensibility, ISAPI Extensions, ISAPI Filters, and Request Filtering.

372

An error occurred while trying to register the Virtual Machine Manager Volume Shadow Copy Service (VSS) writer.

Uninstall Virtual Machine Manager, and then run Setup again.

373

Setup was unable to unregister the Virtual Machine Manager Volume Shadow Copy Service (VSS) writer.

Unregister the writer manually.

400

The server %ComputerName; is already associated with this Virtual Machine Manager server.

Check the remote server name, and try the operation again.

401

Virtual machine host %ComputerName; is not associated with this Virtual Machine Manager server.

Check the virtual machine host name and then try the operation again.

402

Library server %ComputerName; is not associated with this Virtual Machine Manager server.

Check the library server name, and try the operation again.

403

%ComputerName; is not a valid network computer name.

Only fully qualified domain names and NETBIOS computer names are valid. An IP address is valid only for hosts on a perimeter network, ESX hosts, and hosts joined to the domain by using an IPv6 address. Check the computer name, and try the operation again.

404

%ComputerName; cannot resolve with DNS.

Ensure there is network communication with the DNS server. If the problem persists, contact your network administrator.

405

The credentials provided do not indicate a valid domain user account.

1. Verify that the correct user name, a valid password, and the correct domain are entered and then try the operation again.\n2. Verify that the domain controller is operational and responding.

406

Access has been denied while contacting the server %ComputerName;.

1. Verify that the specified user account has administrative privileges on %ComputerName;.\n2. Verify that DCOM access, launch, and activation permissions are enabled on %ComputerName; for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.

407

The agent operation with server %ComputerName; was not successful.

Try the operation again. If the problem persists, ensure that the VMM server is able to communicate with the managed computer.

408

%ComputerName; has an unsupported version of the Virtual Machine Manager agent installed.

Uninstall the Virtual Machine Manager agent using Add or Remove Programs on %ComputerName;, and then try the operation again.

409

%ComputerName; is already associated with a different Virtual Machine Manager server. A computer can only be associated with one Virtual Machine Manager server at a time.

Remove the association of %ComputerName; from its current Virtual Machine Manager server or uninstall the Virtual Machine Manager agent using Add or Remove Programs on %ComputerName; and try the operation again.

410

Agent installation failed on %ComputerName;.

Try the operation again. If the problem persists, install the agent locally and then add the managed computer.

411

Agent installation failed because an installation is already in progress on server %ComputerName;.

Wait for the installation to complete, and then try the operation again.

412

SCVMM cannot configure Virtual Machine Remote Client (VMRC) on host server %ComputerName;.

Try the operation again.

413

The files needed to install agent, version %SoftwareVersion;, are missing from the Virtual Machine Manager server %ServerName;.

Reinstall the missing files by running Virtual Machine Manager Server Setup.

414

Agent installation could not access the ADMIN$ share on server %ComputerName;.

1. Verify that the selected user account has administrative privileges on %ComputerName;.\n2. Verify the permissions on the ADMIN$ share of %ComputerName;. The ADMIN$ share must allow write access to the Administrator group.\n3. Verify that the system time on the Virtual Machine Manager server and the server %ComputerName; is synchronized with the system time on the domain controller.

415

Agent installation failed copying %SourceLocation; to %InstallLocation;.

1. Ensure %ComputerName; is online and not blocked by a firewall. \n2. Ensure that file and printer sharing is enabled on %ComputerName; and it not blocked by a firewall. \n3. Ensure that there is sufficient free space on the system volume. \n4. Verify that the ADMIN$ share on %ComputerName; exists. If the ADMIN$ share does not exist, reboot %ComputerName; and then try the operation again.

416

Agent installation timed out while waiting on service %ServiceName; on %ComputerName;.

Ensure that the Windows Installer service is running on %ComputerName; and try the operation again.

417

There is a Virtual Machine Manager agent that is not responding or not compatible on %ComputerName;.

Uninstall the existing agent and then try the operation again.

418

Agent installation failed on %ComputerName; because WS-Management is not installed or it is disabled.

Ensure that the Windows Remote Management service is enabled and running on the server %ComputerName;. If necessary, install the WinRM component from http://go.microsoft.com/fwlink/?LinkId=84599. For more information, see the installation instructions in the VMM Planning and Deployment Guide.

419

Agent uninstallation failed on %ComputerName; because Agent is not installed.

Verify that Agent is installed on the computer.

420

Agent installation failed on %ComputerName; because of an incompatible operating system version.

Verify that %ComputerName; is running either Windows Server 2003 SP2 or Windows Server 2003 R2 operating system.

421

Agent installation failed on %ComputerName; because of a WS-Management configuration error.

Ensure that the Windows Remote Management service is enabled and running on the server %ComputerName;. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.

422

Machine %ComputerName; is not associated with this Virtual Machine Manager server.

Check the machine name, and then try the operation again.

423

Source machine is not associated with this Virtual Machine Manager server.

Check the source machine name, and then try the operation again.

424

The file %FileName; that the parameter -%Parameter; points to was not found.

Ensure that the required file exists and is accessible.

425

VMM was unable to import the user credentials from the security file.

Ensure that the security file is valid and the key used for encrypting the security file is correct, and then try the operation again.

426

The agent is not responding on the perimeter network machine %ComputerName; because either the agent is not installed; or %ComputerName; is not accessible from Virtual Machine Manager server.

Verify that the agent is installed on the computer, %ComputerName; is accessible from the Virtual Machine Manager server, and then try the operation again.

427

Certificate path not specified during addition of host %ComputerName; on a perimeter network.

Specify the location of the certificate obtained during local agent install on the host.

428

The agent cannot be uninstalled remotely from %ComputerName; without specifying administrator privileges for the machine.

Specify the administrator privileges, and then try the operation again.

429

Failed to configure Virtual Machine Remote Client (VMRC) on host server %ComputerName;.

BLANK

431

The servers in domain %FriendlyName; cannot be enumerated.

Check the name, and then try the operation again.

432

Virtual Server installation was not successful on %ComputerName;.

Verify that an incompatible version of Virtual Server is not already installed. If the error persists, restart %ComputerName;, and then try the operation again.

433

The files needed to install Virtual Server are missing from Virtual Machine Manager server %ServerName;.

To install the missing files, run Virtual Machine Manager Server Setup again.

434

The status of managed computer %MachineName; changed from %FromState; to %ToState;.

BLANK

435

The status of host %MachineName; changed from %FromState; to %ToState;.

BLANK

436

The state of library %MachineName; changed from %FromState; to %ToState;.

BLANK

437

Service %ServiceName; could not be stopped on %ComputerName;.

Stop the service locally in the Services MMC snapin by running services.msc on %ComputerName;, choose the service %ServiceName;, right-click and then select Stop.

438

Service %ServiceName; is not present on %ComputerName;.

Check that the service exists in the Services MMC snapin on %ComputerName; by running services.msc.

439

VMM is unable to add the server %ComputerName; as a managed computer because the server is not listed in Active Directory Domain Services.

Verify that the server name and the domain name are correct, and then try the operation again.

440

Virtual Machine Manager is unable to add the server %ComputerName; as a managed computer because the operating system is not supported. Managed computers must be running Windows Server 2003 SP2 or later.

Ensure that the host is running Windows Server 2003 SP2 or later. If the operating system was updated recently, Active Directory Domain Services updates might still be pending. Wait until Active Directory Domain Services updates run, and then add the host again.

441

Agent communication is blocked. On %ComputerName;, the version of virtualization software or the VMM agent is unsupported.

Update the agent and virtualization software, and then try the operation again.

442

The agent version state of managed computer %MachineName; changed from %FromState; to %ToState;.

BLANK

443

The virtual server version state of host %MachineName; changed from %FromState; to %ToState;.

BLANK

444

%ComputerName; is a Virtual Machine Manager server. A Virtual Machine Manager server cannot be associated with another Virtual Machine Manager server.

Uninstall the Virtual Machine Manager server from %ComputerName; using Add or Remove Programs on %ComputerName; and try the operation again.

445

Service %ServiceName; could not be started on %ComputerName;.

Start the service locally in the Services MMC snapin by running services.msc on %ComputerName;, choose the service %ServiceName;, right-click and then select Start.

446

%ComputerName; is not a fully qualified domain name.

Ensure that %ComputerName; is a fully qualified domain name, and try the operation again.

447

Agent installation failed on %ComputerName; because the supported version of Windows Remote Management (WinRM) is not installed.

Download WinRM from http://go.microsoft.com/fwlink/?LinkId=84599.

448

The files needed to install Microsoft Core XML Services (MSXML) 6.0 are missing from Virtual Machine Manager server %ServerName;.

To install the missing files, run Virtual Machine Manager Server Setup again.

449

Microsoft Core XML Services (MSXML) 6.0 installation was not successful on %ComputerName;.

Verify that an incompatible version of MSXML is not already installed. If the error persists, restart %ComputerName;, and then try the operation again.

450

The specified host name %FriendlyName; does not match the name in the security file. The name in the security file is %ComputerName;.

Ensure that the host name is correct in the security file and try the operation again.

451

The Virtual Machine Remote Console (VMRC) certificate request could not be saved to %FileName;, since a file with that name already exists on the specified path.

Delete the existing file, or specify a different path.

452

Virtual Machine Remote Console (VMRC) certificate request could not be saved to %FileName;.

1. Ensure that you have sufficient permissions to create %FileName;. 2. Ensure that the specified path is valid. 3. Ensure that the path does not include an incorrect value for file name, directory name, or volume label syntax.

453

No Virtual Machine Remote Console (VMRC) certificate file %FileName; was found on the Virtual Machine Manager client.

Ensure that you typed the path name correctly and that a certificate file exists on the specified path. Then try the operation again.

454

Virtual Machine Remote Console (VMRC) certificate file %FileName; is not valid.

Ensure that the file is a valid certificate file, and then try the operation again.

455

%Value; is not a valid entry

Please specify a value between 0 and 255.

456

%Value; is not a valid entry

Please specify a value between 1 and 223.

457

The server %ComputerName; could not be disassociated from this Virtual Machine Manager server.

BLANK

458

The Virtual Machine Manager agent could not be removed from %ComputerName;.

Uninstall the Virtual Machine Manager agent using Add or Remove Programs on %ComputerName;.

459

Agent update failed on %ComputerName;.

Try the operation again. If the error persists, reboot %ComputerName; and then try the operation again.

460

The file %FileName; that the parameter -%Parameter; points to exceeds the maximum size of %MaxLimit; characters.

Ensure that the required file is valid and then try the operation again.

461

Virtual Server installation was not successful on %ComputerName; because of the error: %DetailedErrorMessage;

Verify that an incompatible version of Virtual Server is not already installed. If the error persists, restart %ComputerName;, and then try the operation again.

462

Microsoft Core XML Services (MSXML) 6.0 installation was not successful on %ComputerName; because of the error: %DetailedErrorMessage;

Verify that an incompatible version of MSXML is not already installed. If the error persists, restart %ComputerName;, and then try the operation again.

463

Agent installation failed on %ComputerName;.

Ensure that %ComputerName; has Windows Installer version 3.1 or later installed, and then try the operation again.

464

Virtual Server cannot be installed because the driver for mounting virtual hard disks (vhdstor) is present on %ComputerName;.

Restart %ComputerName; and then try to install Virtual Server again.

465

The virtual machine configuration could not be added to %ComputerName; because the configuration file %FileName; could not be parsed correctly. It may be damaged.

Ensure that the configuration file is valid and then try to register the virtual machine again.

466

System Center Virtual Machine Manager Workgroup Edition cannot manage more than five hosts.

To manage more than five hosts, you must upgrade System Center Virtual Machine Manager. For information about upgrading, go to http://go.microsoft.com/fwlink/?LinkId=117133

467

System Center Virtual Machine Manager Workgroup Edition cannot manage more than five hosts.

Remove some existing hosts and then try the operation again. To manage more than five hosts, upgrade VMM Workgroup Edition. Find information on upgrading at http://go.microsoft.com/fwlink/?LinkId=117133.

468

The specified computer %ComputerName; is a Windows host cluster, which cannot be added if the domain of the host does not have a two-way trust relationship with the domain of the VMM server or if the host is on a perimeter network.

Add the cluster as a trusted domain host.