Splunk to Kusto cheat sheet
Applies to: ✅ Microsoft Fabric ✅ Azure Data Explorer ✅ Azure Monitor ✅ Microsoft Sentinel
This article is intended to assist users who are familiar with Splunk learn the Kusto Query Language to write log queries with Kusto. Direct comparisons are made between the two to highlight key differences and similarities, so you can build on your existing knowledge.
The following table compares concepts and data structures between Splunk and Kusto logs:
Concept | Splunk | Kusto | Comment |
---|---|---|---|
deployment unit | cluster | cluster | Kusto allows arbitrary cross-cluster queries. Splunk doesn't. |
data caches | buckets | caching and retention policies | Controls the period and caching level for the data. This setting directly affects the performance of queries and the cost of the deployment. |
logical partition of data | index | database | Allows logical separation of the data. Both implementations allow unions and joining across these partitions. |
structured event metadata | N/A | table | Splunk doesn't expose the concept of event metadata to the search language. Kusto logs have the concept of a table, which has columns. Each event instance is mapped to a row. |
record | event | row | Terminology change only. |
record attribute | field | column | In Kusto, this setting is predefined as part of the table structure. In Splunk, each event has its own set of fields. |
types | datatype | datatype | Kusto data types are more explicit because they're set on the columns. Both have the ability to work dynamically with data types and roughly equivalent set of datatypes, including JSON support. |
query and search | search | query | Concepts essentially are the same between Kusto and Splunk. |
event ingestion time | system time | ingestion_time() |
In Splunk, each event gets a system timestamp of the time the event was indexed. In Kusto, you can define a policy called ingestion_time that exposes a system column that can be referenced through the ingestion_time() function. |
The following table specifies functions in Kusto that are equivalent to Splunk functions.
Splunk | Kusto | Comment |
---|---|---|
strcat |
strcat() |
(1) |
split |
split() |
(1) |
if |
iff() |
(1) |
tonumber |
todouble() tolong() toint() |
(1) |
upper lower |
toupper() tolower() |
(1) |
replace |
replace_string() , replace_strings() or replace_regex() |
(1) Although replace functions take three parameters in both products, the parameters are different. |
substr |
substring() |
(1) Also note that Splunk uses one-based indices. Kusto notes zero-based indices. |
tolower |
tolower() |
(1) |
toupper |
toupper() |
(1) |
match |
matches regex |
(2) |
regex |
matches regex |
In Splunk, regex is an operator. In Kusto, it's a relational operator. |
searchmatch |
== | In Splunk, searchmatch allows searching for the exact string. |
random |
rand() rand(n) |
Splunk's function returns a number between zero to 231-1. Kusto's returns a number between 0.0 and 1.0, or if a parameter is provided, between 0 and n-1. |
now |
now() |
(1) |
relative_time |
totimespan() |
(1) In Kusto, Splunk's equivalent of relative_time(datetimeVal, offsetVal) is datetimeVal + totimespan(offsetVal) .For example, search | eval n=relative_time(now(), "-1d@d") becomes ... | extend myTime = now() - totimespan("1d") . |
(1) In Splunk, the function is invoked by using the eval
operator. In Kusto, it's used as part of extend
or project
.
(2) In Splunk, the function is invoked by using the eval
operator. In Kusto, it can be used with the where
operator.
The following sections give examples of how to use different operators in Splunk and Kusto.
Note
In the following examples, the Splunk field rule
maps to a table in Kusto, and Splunk's default timestamp maps to the Logs Analytics ingestion_time()
column.
In Splunk, you can omit the search
keyword and specify an unquoted string. In Kusto, you must start each query with find
, an unquoted string is a column name, and the lookup value must be a quoted string.
Product | Operator | Example |
---|---|---|
Splunk | search |
search Session.Id="c8894ffd-e684-43c9-9125-42adc25cd3fc" earliest=-24h |
Kusto | find |
find Session.Id=="c8894ffd-e684-43c9-9125-42adc25cd3fc" and ingestion_time()> ago(24h) |
Kusto log queries start from a tabular result set in which filter
is applied. In Splunk, filtering is the default operation on the current index. You also can use the where
operator in Splunk, but we don't recommend it.
Product | Operator | Example |
---|---|---|
Splunk | search |
Event.Rule="330009.2" Session.Id="c8894ffd-e684-43c9-9125-42adc25cd3fc" _indextime>-24h |
Kusto | where |
Office_Hub_OHubBGTaskError | where Session_Id == "c8894ffd-e684-43c9-9125-42adc25cd3fc" and ingestion_time() > ago(24h) |
Kusto log queries also support take
as an alias to limit
. In Splunk, if the results are ordered, head
returns the first n results. In Kusto, limit
isn't ordered, but it returns the first n rows that are found.
Product | Operator | Example |
---|---|---|
Splunk | head |
Event.Rule=330009.2 | head 100 |
Kusto | limit |
Office_Hub_OHubBGTaskError | limit 100 |
For the bottom results, in Splunk, you use tail
. In Kusto, you can specify ordering direction by using asc
.
Product | Operator | Example |
---|---|---|
Splunk | head |
Event.Rule="330009.2" | sort Event.Sequence | head 20 |
Kusto | top |
Office_Hub_OHubBGTaskError | top 20 by Event_Sequence |
Splunk has an eval
function, but it's not comparable to the eval
operator in Kusto. Both the eval
operator in Splunk and the extend
operator in Kusto support only scalar functions and arithmetic operators.
Product | Operator | Example |
---|---|---|
Splunk | eval |
Event.Rule=330009.2 | eval state= if(Data.Exception = "0", "success", "error") |
Kusto | extend |
Office_Hub_OHubBGTaskError | extend state = iff(Data_Exception == 0,"success" ,"error") |
Kusto uses the project-rename
operator to rename a field. In the project-rename
operator, a query can take advantage of any indexes that are prebuilt for a field. Splunk has a rename
operator that does the same.
Product | Operator | Example |
---|---|---|
Splunk | rename |
Event.Rule=330009.2 | rename Date.Exception as execption |
Kusto | project-rename |
Office_Hub_OHubBGTaskError | project-rename exception = Date_Exception |
Splunk uses the table
command to select which columns to include in the results. Kusto has a project
operator that does the same and more.
Product | Operator | Example |
---|---|---|
Splunk | table |
Event.Rule=330009.2 | table rule, state |
Kusto | project |
Office_Hub_OHubBGTaskError | project exception, state |
Splunk uses the fields -
command to select which columns to exclude from the results. Kusto has a project-away
operator that does the same.
Product | Operator | Example |
---|---|---|
Splunk | fields - |
Event.Rule=330009.2 | fields - quota, hightest_seller |
Kusto | project-away |
Office_Hub_OHubBGTaskError | project-away exception, state |
See the list of summarize aggregations functions that are available.
Splunk operator | Splunk example | Kusto operator | Kusto example |
---|---|---|---|
stats |
search (Rule=120502.*) | stats count by OSEnv, Audience |
summarize |
Office_Hub_OHubBGTaskError | summarize count() by App_Platform, Release_Audience |
evenstats |
... | stats count_i by time, category | eventstats sum(count_i) AS count_total by _time_ |
join |
T2 | join kind=inner (T1) on _time | project _time, category, count_i, count_total |
join
in Splunk has substantial limitations. The subquery has a limit of 10,000 results (set in the deployment configuration file), and a limited number of join flavors are available.
Product | Operator | Example |
---|---|---|
Splunk | join |
Event.Rule=120103* | stats by Client.Id, Data.Alias | join Client.Id max=0 [search earliest=-24h Event.Rule="150310.0" Data.Hresult=-2147221040] |
Kusto | join |
cluster("OAriaPPT").database("Office PowerPoint").Office_PowerPoint_PPT_Exceptions | where Data_Hresult== -2147221040 | join kind = inner (Office_System_SystemHealthMetadata | summarize by Client_Id, Data_Alias)on Client_Id |
The default sort order is ascending. To specify descending order, add a minus sign (-
) before the field name. Kusto also supports defining where to put nulls, either at the beginning or at the end.
Product | Operator | Example |
---|---|---|
Splunk | sort |
Event.Rule=120103 | sort -Data.Hresult |
Kusto | order by |
Office_Hub_OHubBGTaskError | order by Data_Hresult, desc |
The multivalue expand operator is similar in both Splunk and Kusto.
Product | Operator | Example |
---|---|---|
Splunk | mvexpand |
mvexpand solutions |
Kusto | mv-expand |
mv-expand solutions |
In Log Analytics in the Azure portal, only the first column is exposed. All columns are available through the API.
Product | Operator | Example |
---|---|---|
Splunk | fields |
Event.Rule=330009.2 | fields App.Version, App.Platform |
Kusto | facets |
Office_Excel_BI_PivotTableCreate | facet by App_Branch, App_Version |
In Kusto, you can use summarize arg_min()
to reverse the order of which record is chosen.
Product | Operator | Example |
---|---|---|
Splunk | dedup |
Event.Rule=330009.2 | dedup device_id sortby -batterylife |
Kusto | summarize arg_max() |
Office_Excel_BI_PivotTableCreate | summarize arg_max(batterylife, *) by device_id |
- Walk through a tutorial on the Kusto Query Language.