azcopy bench
Runs a performance benchmark by uploading or downloading test data to or from a specified destination. For uploads, the test data is automatically generated.
The benchmark command runs the same process as 'copy', except that:
Instead of requiring both source and destination parameters, benchmark takes just one. This is the blob container, Azure Files Share, or Azure Data Lake Storage file system that you want to upload to or download from.
The 'mode' parameter describes whether AzCopy should test uploads to or downloads from given target. Valid values ar`e 'Upload' and 'Download'. Default value is 'Upload'.
For upload benchmarks, the payload is described by command line parameters, which control how many files are auto-generated and how big they are. The generation process takes place entirely in memory. Disk isn't used.
For downloads, the payload consists of whichever files already exist at the source. (See example below about how to generate test files if needed).
Only a few of the optional parameters that are available to the copy command are supported.
Additional diagnostics are measured and reported.
For uploads, the default behavior is to delete the transferred data at the end of the test run. For downloads, the data is never actually saved locally.
Benchmark mode will automatically tune itself to the number of parallel TCP connections that gives the maximum throughput. It will display that number at the end. To prevent auto-tuning, set the COPY_CONCURRENCY_VALUE environment variable to a specific number of connections.
All the usual authentication types are supported. However, the most convenient approach for benchmarking upload is typically to create an empty container with a SAS token and use SAS authentication. (Download mode requires a set of test data to be present in the target container.)
azcopy bench [destination] [flags]
Run an upload benchmark with default parameters (suitable for benchmarking networks up to 1 Gbps).
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>"
Run an upload benchmark with a specified block size of 2 MiB and check the length of files after the transfer.
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>" --block-size-mb 2 --check-length
Run a benchmark test that uploads 500 files. Each file is 500 MiB in size, and the log level is set to display only errors.
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>" --file-count 500 --size-per-file 500M --log-level ERROR
Run a benchmark test that uploads 100 files. Each file is 2 GiB in size. This is suitable for benchmarking on a fast network (For example: 10 Gbps).
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>" --file-count 100 --size-per-file 2G
The next example is the same as above, but with 50,000 files. Each file 8 MiB in size. This example also computes the MD5 hashes of each file similar to the way that the --put-md5 flag computes the MD5 in the azcopy copy command. The purpose of --put-md5 when benchmarking is to test whether MD5 computation affects throughput for the selected file count and size.
azcopy bench --mode='Upload' "https://[account].blob.core.windows.net/[container]?<SAS>" --file-count 50000 --size-per-file 8M --put-md5
Run a benchmark test that uploads 1000 files and creates folders to divide up the data. Each file is 100 KiB in size.
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>" --file-count 1000 --size-per-file 100K --number-of-folders 5
Run a benchmark test that downloads existing files from a target.
azcopy bench --mode='Download' "https://[account].blob.core.windows.net/[container]?<SAS?"
Run a download benchmark with the default parameters and cap the transfer rate at 500 Mbps.
azcopy bench --mode=Download "https://[account].blob.core.windows.net/[container]?<SAS>" --cap-mbps 500
Run an upload that does not delete the transferred files. These files can then serve as the payload for a download test.
azcopy bench "https://[account].blob.core.windows.net/[container]?<SAS>" --file-count 100 --delete-test-data=false
--blob-type string
defines the type of blob at the destination. Used to allow benchmarking different blob types. Identical to the same-named parameter in the copy command (default "Detect")
--block-size-mb float
Use this block size (specified in MiB). Default is automatically calculated based on file size. Decimal fractions are allowed - for example, 0.25. Identical to the same-named parameter in the copy command
--check-length
Check the length of a file on the destination after the transfer. If there's a mismatch between source and destination, the transfer is marked as failed. (default true)
--delete-test-data
If true, the benchmark data will be deleted at the end of the benchmark run. Set it to false if you want to keep the data at the destination - for example, to use it for manual tests outside benchmark mode (default true)
--file-count
(uint) number of auto-generated data files to use (default 100)
-h
, --help
help for bench
--log-level
(string) define the log verbosity for the log file, available levels: INFO(all requests/responses), WARNING(slow responses), ERROR(only failed requests), and NONE(no output logs). (default "INFO")
--mode
(string) Defines if Azcopy should test uploads or downloads from this target. Valid values are 'upload' and 'download'. Defaulted option is 'upload'. (default "upload")
--number-of-folders
(uint) If larger than 0, create folders to divide up the data.
--put-blob-size-mb
Use this size (specified in MiB) as a threshold to determine whether to upload a blob as a single PUT request when uploading to Azure Storage. The default value is automatically calculated based on file size. Decimal fractions are allowed (For example: 0.25).
--put-md5
Create an MD5 hash of each file, and save the hash as the Content-MD5 property of the destination blob/file. (By default the hash is NOT created.) Identical to the same-named parameter in the copy command
--size-per-file
(string) Size of each auto-generated data file. Must be a number immediately followed by K, M or G. E.g. 12k or 200G (default "250M")
--cap-mbps
(float) Caps the transfer rate, in megabits per second. Moment-by-moment throughput might vary slightly from the cap. If this option is set to zero, or it's omitted, the throughput isn't capped.
--output-type
(string) Format of the command's output. The choices include: text, json. The default value is 'text'. (default "text")
--trusted-microsoft-suffixes
(string) Specifies additional domain suffixes where Microsoft Entra login tokens may be sent. The default is '.core.windows.net;.core.chinacloudapi.cn;.core.cloudapi.de;.core.usgovcloudapi.net;*.storage.azure.net'. Any listed here are added to the default. For security, you should only put Microsoft Azure domains here. Separate multiple entries with semi-colons.