CheckScanner Class

Creates an instance of the CheckScanner class.

Indicates the device can automatically adjust the contrast of the image.

Indicates that the y endpoint value of the scanned image is set to the value of the DocumentHeight property.

Indicates the crop area is equal to the scanned image.

Indicates that the crop area definitions (as specified by the value of the MaxCropAreas property) have their x,y and width/height values reset to 0,0 and DocumentWidth and DocumentHeight, respectively.

Indicates that the x endpoint value of a scanned image are set to the value of the DocumentWidth property.

Indicates that a check was detected in the check scanner device.

Indicates the specified firmware file or files exist, but one or more of those files are either not in the correct format or are corrupted.

Indicates that no check was detected in the check scanner device.

Indicates there is no room for the scanned image to be stored in memory.

Indicates a specified statistic could not be reset or updated.

Indicates the image data from the check scanner is in a native format that cannot be converted to a bitmap.

Holds the programmatic name of the Communication Error Count common statistic.

Holds the programmatic name of the Device Category common statistic.

Holds the programmatic name of the Firmware Revision common statistic.

Holds the programmatic name of the Hours Powered On common statistic.

Holds the programmatic name of the Installation Date common statistic.

Holds the programmatic name of the Interface common statistic.

Holds the programmatic name of the Manufacture Date common statistic.

Holds the programmatic name of the Manufacturer Name common statistic.

Holds the programmatic name of the Mechanical Revision common statistic.

Holds the programmatic name of the Model Name common statistic.

Holds the programmatic name of the Serial Number common statistic.

Holds the programmatic name of the Unified POS Version common statistic.

Indicates that the device’s power is turned off or it is detached from the terminal.

Indicates that the device is powered on but is either not ready or unable to respond to requests.

Indicates that either the device’s power is off or it is offline.

Indicates that the device’s power is turned on and it is ready for use.

Indicates that the check scan is complete.

Indicates the update firmware process has completed successfully.

Indicates the update firmware process succeeded. However, the Service Object and/or the physical device cannot be returned to the state they were in before the update firmware process started.

Indicates the update firmware process failed. The device will not be operational until another attempt to update the firmware is successful.

Indicates the update firmware process failed. However, the device is still operational.

Indicates the update firmware process failed. The device is in an indeterminate state.

Indicates the update firmware process failed. The device is either unusable or unrecoverable through software.

Indicates the update firmware process has completed 1 to 100 percent successfully.

Used as the value for a timeout parameter in common and device-specific methods to indicate the method should wait until it receives a response, instead of timing out.

Gets or sets the Boolean value that indicates whether POS for .NET automatically disables the device when data is received.

Gets the Boolean value that indicates whether the contrast can be adjusted automatically.

Gets the Boolean value that indicates whether the Check Scanner device can create a file name for the image file automatically.

Gets the Boolean value that indicates whether the Check Scanner device can generate tag data automatically.

Gets the Boolean value that indicates whether the size of the scanned document can be set automatically.

Gets the Boolean value that indicates whether the Check Scanner device supports image formats other than bitonal.

Gets a Boolean value that indicates whether the Service Object/device supports comparing the firmware version in the physical device against that of a firmware file.

Gets the Boolean value that indicates whether the Magnetic Ink Character Recognition (MICR) data can be captured.

Gets the Boolean value that indicates the ability of the device to lighten or darken the scanned image.

Gets the Boolean value that indicates whether the Check Scanner device supports a feature that allows cropping of areas of interest within the scan image area defined by the DocumentHeight and DocumentWidth properties.

Gets the image file formats that this Check Scanner device supports.

Gets the Boolean value that indicates whether the Check Scanner device can set tag data.

Gets the Boolean value that indicates whether the Check Scanner device supports a check Magnetic Ink Character Recognition (MICR) read function.

Gets the power reporting capabilities of the device.

Gets a Boolean value that indicates whether the device can accumulate and can provide various statistics regarding usage.

Gets the Boolean value that indicates whether the Check Scanner device can store check images.

Gets a Boolean value that indicates whether the device's firmware can be updated through the UpdateFirmware method.

Gets a Boolean value that indicates whether some or all the device statistics can be reset to 0 (zero) by using the ResetStatistic and ResetStatistics methods, or updated by using the UpdateStatistic and UpdateStatistics methods.

Gets the Boolean value that indicates whether a check has to be removed before validation printing.

Gets a string that indicates the health of the device.

Gets a Boolean value that indicates whether the device is claimed for exclusive access.

Gets or sets the image scan mode for later document scan operations.

Gets or sets the Boolean value that indicates whether the Check Scanner device can conduct a MICR read.

Gets or sets the contrast to adjust the darkness of the image.

Gets the number of defined crop areas that may be applied to the captured image.

Gets the number of data events currently queued by the service object.

Gets or sets the Boolean value that indicates whether the service object can deliver a queued event.

Gets a string identifying the device and the company that manufactured it.

Gets or sets a Boolean value that indicates whether the device has been placed in an operational state.

Gets a short string identifying the device and any pertinent information about it.

Gets or sets the hardware path of a device.

Gets or sets the height of the document scanned or the height of the document to be scanned.

Gets or sets the width of the document scanned or the width of the document to be scanned.

Gets or sets the file name associated with the image data file.

Gets or sets the file location associated with the image data file.

Gets or sets a Boolean value that indicates whether the application has requested that the Service Object not deliver events.

Gets the image data.

Gets or sets the data format of the image file that the device uses when it captures an image.

Gets the current memory availability status if the device can store multiple image files.

Gets or sets a string that specifies the tag name for the captured image data.

Gets the Boolean value that indicates whether the Check Scanner is an exclusive-use device.

Gets or sets the units of measure that are currently valid for the Check Scanner device.

Gets the maximum number of crop areas the device can support.

Gets or sets the type of power notification selection made by the application.

Gets the current power condition.

Gets or sets the resolution of the device when a scan image is to occur. The resolution value is defined as dpi (dots per inch).

Gets the resolutions that the Check Scanner device can support.

Gets a "best guess" estimate of the remaining number of images that can be stored.

Gets a string identifying the Service Object that supports the device and the company that produced it.

Gets the Service Object version number.

Gets the current state of the device.

Gets or sets the object that is used to marshal the event handler calls issued because of a POS event.

Starts the document insertion process.

Starts the document removal process.

Tests the state of a device.

Requests exclusive access to the device.

Clears a specific image or all the images in the device memory.

Clears all device input that has been buffered.

Resets the values of properties altered by DataEvent or ErrorEvent.

Releases the device and its resources.

Determines whether the version of the specified firmware is newer than, older than, or the same as the version of firmware in the physical device.

Establishes one or more cropping areas that can be applied to a scanned image.

Deletes the specified property from the XML configuration file.

Used to communicate directly with the Service Object.

Ends the document insertion process.

Ends the document removal or ejection mode.

Used by the Service Object to retrieve the specified property from the XML configuration file.

Used by the Service Objects to raise an event.

Opens a device for later input/output processing.

Releases exclusive access to the device.

Resets the specified statistic to 0 (zero).

Resets all statistics associated with a device to 0 (zero).

Resets all statistics for a specified category to 0 (zero).

Resets the specified statistics to 0 (zero).

Retrieves the most recently scanned image that resides in the available memory and uses it to populate the ImageData property.

Retrieves an image that was stored in memory and uses it to set the ImageData property.

Retrieves the specified device statistic.

Retrieves all device statistics.

Retrieves the statistics for the specified category.

Retrieves the specified statistics.

Sets a property value (or create a new property) in the XML configuration file.

Stores an image or a cropped area of the image in the memory of the device.

Updates the firmware of a device with the version of the firmware contained or defined in the file specified by the firmwareFileName parameter regardless of whether that firmware’s version is newer than, older than, or the same as the version of the firmware already in the device.

Updates the value of a specified device statistic.

Updates a list of statistics with the corresponding specified values.

Updates the specified category of statistics with the specified value.

Raised to notify the application that a scanned check image is available.

Raised by the Service Object to communicate information directly to the application.

Raised to indicate an error has been detected while trying to read keyboard device input data.

Raised by the Service Object to alert the application of a device status change.