2.2.1.6.1 Child Elements
The following table lists the child elements of the Description element.
Element |
Type |
Available |
Description |
---|---|---|---|
Connectivity |
ConnectivityType |
Yes |
Interactive Connectivity Establishment (ICE) connectivity information. |
Security |
xs:string [128] |
Yes |
The security profile in use. Supported values are "V1", "SRTP" and "None". |
Offerer |
xs:boolean |
Yes<37> |
"True" if the reporting endpoint offered the Media Line; otherwise, "False". |
Transport |
TransportType |
Yes |
The type of transport in use. Supported values are "TCP" and "UDP". |
NetworkConnectivityInfo<38> |
NetworkConnectivityInfoType |
Yes |
Information about network connectivity of the endpoint. |
LocalAddr |
AddrType |
Yes |
Internet Protocol (IP) address related information for the reporting endpoint. |
RemoteAddr |
AddrType |
Yes |
IP address related information for the remote endpoint. |
CaptureDev |
DeviceType |
Yes |
A device that is used to capture audio and video media, such as a microphone, a USB phone or a camera. |
RenderDev |
DeviceType |
Yes |
A device that is used to render audio and video media, such as speakers, a headset, or a USB phone. |
v3:ReflexiveLocalIPAddress<39> |
AddrType |
Yes |
The IP address from which the Media Relay received the allocate request. This address is returned by the Media Relay. |
v3:MidCallReport<40> |
xs:boolean |
Yes |
A flag that indicates whether the QoE data is reported during the middle of the call. |
v3:Separator3<41> |
default |
No |
Separator element used for future schema extensions. |
v4:WifiRadioType<42> |
xs:unsignedByte |
Yes |
Average render speech level after dynamic range compression or analog gain control is applied. |
v4:WifiRSSI<43> |
xs:int |
Yes |
Average WiFi Received Signal Strength Indication value expressed in percentage points [0-99]. |
v4:SSID<44> |
xs:string |
Yes |
Name of WiFi Service Set Identifier. |
v4:WifiChannel<45> |
xs:int |
Yes |
WiFi channel used during session. |
v4:ActivePowerProfile<46> |
xs:int |
Yes |
Was WiFi placed in lower power mode during session. |
v4:WifiHandovers<47> |
xs:int |
Yes |
Number of WiFi hand overs to other access points during session. |
v4:WifiChannelSwitches<48> |
xs:int |
Yes |
Number of times the WiFi channel switched during session. |
v4:WifiChannelReassociations<49> |
xs:int |
Yes |
Number of WiFi channel reassociated during session. |
v4:RecvQoSMarking<50> |
xs:unsignedByte |
Yes |
Quality of Service marking on packets received during session. Currently not used. |
v4:SendQoSMarking<51> |
xs:unsignedByte |
Yes |
Quality of Service marking on packets sent during session. Currently not used. |
v4:WifiRadioFrequency |
xs:int |
Yes |
WiFi frequency used during session. |
v4:WifiMTU |
xs:int |
Yes |
The maximum transmission unit (MTU) for the Wi-Fi connection. |
v4:WifiSupportFlags |
xs:int |
Yes |
A flag that indicates whether the IPv4 or IPv6 protocols are supported. SupportFalg_IPv4 = (1<<0); SupportFlag_IPv6 = (1<<1). |
v4:WifiStatusFlags |
xs:int |
Yes |
A flag that indicates the current connection status. StatusFlag_VPN = (1<<0). |
v4:WifiTunnelType |
xs:int |
Yes |
A flag that indicates the active tunneling technology
between IPv6 and IPv4. The value is one of the following: Direct = 2 6To4 = 3 ISATAP = 4 Teredo = 5 IPHTTPS = 6 |
v4:WifiSignalStrength |
xs:int |
Yes |
The Wi-Fi signal strength in percentage points [0-99]. |
v4:WifiBatteryCharge |
xs:int |
Yes |
The estimated remaining battery charge in percentage points [0-99], with 0 indicating that the device was plugged in. |
v4:ConnectionName |
xs:string |
Yes |
The currently active VPN network name. |
v4:DNSSuffix |
xs:string |
Yes |
The DNS suffix associated with the network adapter. |
v4:LastRTPSendTime<52> |
xs:dateTime |
Yes |
Date and time the last RTP packet was sent. |
v4:LastRTCPSendTime<53> |
xs:dateTime |
Yes |
Date and time the last RTP packet was sent. |
v4:LastRTPReceiveTime<54> |
xs:dateTime |
Yes |
Date and time the last RTP packet was received. |
v4:LastRTCPReceiveTime<55> |
xs:dateTime |
Yes |
Date and time the last RTP packet was received. |
v4:Separator4<56> |
default |
Yes |
Separator used for future schema extensions. |