New-AzDnsRecordSet

Syntax

New-AzDnsRecordSet
   -Name <String>
   -ZoneName <String>
   -ResourceGroupName <String>
   -Ttl <UInt32>
   -RecordType <RecordType>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzDnsRecordSet
   -Name <String>
   -ZoneName <String>
   -ResourceGroupName <String>
   [-Ttl <UInt32>]
   -RecordType <RecordType>
   -TargetResourceId <String>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzDnsRecordSet
   -Name <String>
   -Zone <DnsZone>
   -Ttl <UInt32>
   -RecordType <RecordType>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzDnsRecordSet
   -Name <String>
   -Zone <DnsZone>
   [-Ttl <UInt32>]
   -RecordType <RecordType>
   -TargetResourceId <String>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-AzDnsRecordSet cmdlet creates a new Domain Name System (DNS) record set with the specified name and type in the specified zone. A RecordSet object is a set of DNS records with the same name and type. Note that the name is relative to the zone and not the fully qualified name. The DnsRecords parameter specifies the records in the record set. This parameter takes an array of DNS records, constructed using New-AzDnsRecordConfig. You can use the pipeline operator to pass a DnsZone object to this cmdlet, or you can pass a DnsZone object as the Zone parameter, or alternatively you can specify the zone by name. You can use the Confirm parameter and $ConfirmPreference Windows PowerShell variable to control whether the cmdlet prompts you for confirmation. If a matching RecordSet already exists (same name and record type), you must specify the Overwrite parameter, otherwise the cmdlet will not create a new RecordSet .

Examples

Example 1: Create a RecordSet of type A

$Records = @()
$Records += New-AzDnsRecordConfig -IPv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

# When creating a RecordSet containing a single record, the above sequence can also be condensed into a single line:

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords (New-AzDnsRecordConfig -IPv4Address 1.2.3.4)

# To create a record set containing multiple records, use New-AzDnsRecordConfig to add each record to the $Records array,
# then call New-AzDnsRecordSet, as follows:

$Records = @()
$Records += New-AzDnsRecordConfig -IPv4Address 1.2.3.4
$Records += New-AzDnsRecordConfig -IPv4Address 5.6.7.8
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type A and has a TTL of 1 hour (3600 seconds). It contains a single DNS record.

Example 2: Create a RecordSet of type AAAA

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv6Address 2001:db8::1
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType AAAA -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type AAAA and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 3: Create a RecordSet of type CNAME

$Records = @()
$Records += New-AzDnsRecordConfig -Cname www.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType CNAME -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type CNAME and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 4: Create a RecordSet of type MX

$Records = @()
$Records += New-AzDnsRecordConfig -Exchange "mail.microsoft.com" -Preference 5
$RecordSet = New-AzDnsRecordSet -Name "mail" -RecordType MX -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named www in the zone myzone.com. The record set is of type MX and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 5: Create a RecordSet of type NS

$Records = @()
$Records += New-AzDnsRecordConfig -Nsdname ns1-01.azure-dns.com
$RecordSet = New-AzDnsRecordSet -Name "ns1" -RecordType NS -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named ns1 in the zone myzone.com. The record set is of type NS and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 6: Create a RecordSet of type PTR

$Records = @()
$Records += New-AzDnsRecordConfig -Ptrdname www.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "4" -RecordType PTR -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "3.2.1.in-addr.arpa" -DnsRecords $Records

This command creates a RecordSet named 4 in the zone 3.2.1.in-addr.arpa. The record set is of type PTR and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 7: Create a RecordSet of type SRV

$Records = @()
$Records += New-AzDnsRecordConfig -Priority 0 -Weight 5 -Port 8080 -Target sipservice.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "_sip._tcp" -RecordType SRV -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named _sip._tcp in the zone myzone.com. The record set is of type SRV and has a TTL of 1 hour (3600 seconds). It contains a single DNS record, pointing to the IP address 2001.2.3.4. The service (sip) and the protocol (tcp) are specified as part of the record set name, not as part of the record data. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 8: Create a RecordSet of type TXT

$Records = @()
$Records += New-AzDnsRecordConfig -Value "This is a TXT Record"
$RecordSet = New-AzDnsRecordSet -Name "text" -RecordType TXT -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named text in the zone myzone.com. The record set is of type TXT and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 9: Create a RecordSet at the zone apex

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "@" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet at the apex (or root) of the zone myzone.com. To do this, the record set name is specified as "@" (including the double-quotes). You cannot create CNAME records at the apex of a zone. This is a constraint of the DNS standards; it is not a limitation of Azure DNS. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 10: Create a wildcard Record Set

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "*" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named * in the zone myzone.com. This is a wildcard record set. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 11: Create an empty record set

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords @()

This command creates a RecordSet named www in the zone myzone.com. The record set is of type A and has a TTL of 1 hour (3600 seconds). This is an empty record set, which acts as a placeholder to which you can later add records.

Example 12: Create a record set and suppress all confirmation

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords (New-AzDnsRecordConfig -Ipv4Address 1.2.3.4) -Confirm:$False -Overwrite

This command creates a RecordSet. The Overwrite parameter ensures that this record set overwrites any pre-existing record set with the same name and type (existing records in that record set are lost). The Confirm parameter with a value of $False suppresses the confirmation prompt.

Parameters

-Confirm

-DefaultProfile

-DnsRecords

-Metadata

-Name

-Overwrite

-RecordType

-ResourceGroupName

-TargetResourceId

-Ttl

-WhatIf

-Zone

-ZoneName

Inputs

String

DnsZone

UInt32

RecordType

Hashtable

DnsRecordBase[]

Outputs

DnsRecordSet

Notes

You can use the Confirm parameter to control whether this cmdlet prompts you for confirmation. By default, the cmdlet prompts you for confirmation if the $ConfirmPreference Windows PowerShell variable has a value of Medium or lower. If you specify Confirm or Confirm:$True, this cmdlet prompts you for confirmation before it runs. If you specify Confirm:$False, the cmdlet does not prompt you for confirmation.

Related Links

• Add-AzDnsRecordConfig
• Get-AzDnsRecordSet
• New-AzDnsRecordConfig
• Remove-AzDnsRecordSet
• Set-AzDnsRecordSet