Set-AzureStorSimpleDevice

Changes the device configuration for a device.

Note

The cmdlets referenced in this documentation are for managing legacy Azure resources that use Azure Service Manager (ASM) APIs. This legacy PowerShell module isn't recommended when creating new resources since ASM is scheduled for retirement. For more information, see Azure Service Manager retirement.

The Az PowerShell module is the recommended PowerShell module for managing Azure Resource Manager (ARM) resources with PowerShell.

Syntax

Set-AzureStorSimpleDevice
   -DeviceName <String>
   [-NewName <String>]
   [-TimeZone <TimeZoneInfo>]
   [-SecondaryDnsServer <String>]
   [-StorSimpleNetworkConfig <NetworkConfig[]>]
   [-Profile <AzureSMProfile>]
   [<CommonParameters>]
Set-AzureStorSimpleDevice
   -DeviceId <String>
   [-NewName <String>]
   [-TimeZone <TimeZoneInfo>]
   [-SecondaryDnsServer <String>]
   [-StorSimpleNetworkConfig <NetworkConfig[]>]
   [-Profile <AzureSMProfile>]
   [<CommonParameters>]

Description

The Set-AzureStorSimpleDevice cmdlet changes the device configuration for a device. If you are setting up a device for the first time, you must specify the TimeZone, SecondaryDnsServer, and StorSimpleNetworkConfig parameters. You must include network configuration for Data0 with controller0 and controller1 and IP addresses. There must be at least one Internet SCSI (ISCSI)-enabled network interface to configure the device for the first time.

Examples

Example 1: Modify the configuration for a device

PS C:\>$NetworkConfigData0 = New-AzureStorSimpleNetworkConfig -InterfaceAlias Data0 -EnableIscsi $True -Controller0IPv4Address "10.67.64.48" -Controller1IPv4Address "10.67.64.49" 
PS C:\> $TimeZoneInfo = [System.TimeZoneInfo]::GetSystemTimeZones() | where { $_.Id -eq "Pacific Standard Time" }
PS C:\> $OnlineDevice = @(Get-AzureStorSimpleDevice | Where { $_.Status -eq "Online"})[0]
PS C:\> $UpdatedDetails = Set-AzureStorSimpleDevice -DeviceId $OnlineDevice.DeviceId -NewName "Device22" -TimeZone $TimeZoneInfo -SecondaryDnsServer 10.8.8.8 -StorSimpleNetworkConfig $NetworkConfigData0
VERBOSE: ClientRequestId: 0f163163-5ad0-4635-a7b5-870d47297f66_PS
VERBOSE: Successfully created a StorSimple Network Configuration for interface Data0
VERBOSE: ClientRequestId: 552e4a6c-7006-4015-a20b-9def6428a85e_PS
VERBOSE: ClientRequestId: f31cc84c-bc8a-404a-9da6-4670a7999e75_PS
VERBOSE: 1 StorSimple device found! 
VERBOSE: ClientRequestId: 545bc1a9-3c1b-4e50-89a6-9678aefe79e5_PS
VERBOSE: ClientRequestId: f114ad08-47f5-4fb8-8a01-1ea7f1ed1b98_PS
VERBOSE: About to configure the device : Device22 ! 
VERBOSE: ClientRequestId: 6afe7927-1c19-48d3-ac22-68148fd056b8_PS
VERBOSE: The task created for your Setup operation has completed successfully. 
VERBOSE: ClientRequestId: 467c142c-90da-4d75-82a4-c114afce953d_PS
VERBOSE: Successfully updated configuration for device Device22 with id 865e68f6-1e71-47b6-80d5-15d3a23bd2b0

The first command creates a network configuration for the Data0 interface. This command specifies the Controller0IPv4Address, Controller1IPv4Address, and EnableIscsi parameters. The command stores the result in the $NetworkConfigData0 variable.

The second command uses the System.TimeZoneInfo .NET class and standard syntax to get Pacific Standard Time zone, and stores that object in the $TimeZoneInfo variable.

The third command uses the Get-AzureStorSimpleDevice cmdlet and the Where-Object core cmdlet to get an online StorSimple device, and then stores it in the $OnlineDevice variable.

The final command modifies the configuration for the device that has the specified device ID. The command uses the configuration object that the current cmdlet created in the first command. The command uses the time zone stored in $TimeZoneInfo.

Example 2: Pipe the configuration object to modify a device

PS C:\>$TimeZoneInfo = [System.TimeZoneInfo]::GetSystemTimeZones() | where { $_.Id -eq "Pacific Standard Time" }
PS C:\> $OnlineDevice = @(Get-AzureStorSimpleDevice | Where { $_.Status -eq "Online"})[0]
PS C:\> $UpdatedDetails = New-AzureStorSimpleNetworkConfig -InterfaceAlias Data0 -EnableIscsi $True -Controller0IPv4Address "10.67.64.48" -Controller1IPv4Address "10.67.64.49" | Set-AzureStorSimpleDevice -DeviceId $OnlineDevice.DeviceId -NewName "Device22" -TimeZone $TimeZoneInfo -SecondaryDnsServer 10.8.8.8 
VERBOSE: ClientRequestId: fa2f5000-169c-4feb-abbf-23f4b5c837fa_PS
VERBOSE: Successfully created a StorSimple Network Configuration for interface Data0
VERBOSE: ClientRequestId: fae6a491-919c-44b2-93e0-0c51f202c24b_PS
VERBOSE: ClientRequestId: e1803427-a097-4d58-ab7d-14a4c39fd768_PS
VERBOSE: 1 StorSimple device found! 
VERBOSE: ClientRequestId: 9e796c3d-3100-46ab-9a09-0e10c73a296f_PS
VERBOSE: ClientRequestId: 5b4cad96-31f4-4d07-a278-df5af3e06ad4_PS
VERBOSE: About to configure the device : Device22 ! 
VERBOSE: ClientRequestId: 9061f7df-144f-4f30-858c-045d882ca392_PS
VERBOSE: The task created for your Setup operation has completed successfully. 
VERBOSE: ClientRequestId: 2ed2fa9b-8459-4cd6-9a61-5fc25ced2815_PS
VERBOSE: Successfully updated configuration for device Device22 with id 865e68f6-1e71-47b6-80d5-15d3a23bd2b0

This example does the same configuration update as the first example, except that the final command passes the network configuration object to the current cmdlet by using the pipeline operator.

Example 3: Pipe the time zone object to modify a device

PS C:\>$NetworkConfigData0 = New-AzureStorSimpleNetworkConfig -InterfaceAlias Data0 -EnableIscsi $True -Controller0IPv4Address "10.67.64.48" -Controller1IPv4Address "10.67.64.49" 
PS C:\> $OnlineDevice = @(Get-AzureStorSimpleDevice | Where { $_.Status -eq "Online"})[0]
PS C:\> $UpdatedDetails = [System.TimeZoneInfo]::GetSystemTimeZones() | where { $_.Id -eq "Pacific Standard Time" } | Set-AzureStorSimpleDevice -DeviceId $OnlineDevice.DeviceId -NewName "Device22" -SecondaryDnsServer 10.8.8.8 -StorSimpleNetworkConfig $NetworkConfigData0
VERBOSE: ClientRequestId: cfc3f3c7-a8b6-462b-96f4-124050b736fe_PS
VERBOSE: Successfully created a StorSimple Network Configuration for interface Data0
VERBOSE: ClientRequestId: 6017b76f-a771-4bf8-901e-14876e0f9962_PS
VERBOSE: ClientRequestId: 59a9275c-9005-4e8a-b68b-efa1e6c27d47_PS
VERBOSE: 1 StorSimple device found! 
VERBOSE: ClientRequestId: 08e5142a-b038-4607-8690-0c5a8b948352_PS
VERBOSE: ClientRequestId: 218af244-b8f4-4a4b-817e-8f67e1323f03_PS
VERBOSE: About to configure the device : Device22 ! 
VERBOSE: ClientRequestId: fbd1f32d-1d74-432e-9dc0-90b46674884a_PS
VERBOSE: The task created for your Setup operation has completed successfully. 
VERBOSE: ClientRequestId: 981cb941-252c-4898-ba9f-f19e5b8bcaa4_PS
VERBOSE: Successfully updated configuration for device Device22 with id 865e68f6-1e71-47b6-80d5-15d3a23bd2b0

This example does the same configuration update as the first example, except that the final command passes the time zone object to the current cmdlet by using the pipeline operator.

Parameters

-DeviceId

Specifies the instance ID of the StorSimple device to configure.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-DeviceName

Specifies the friendly name of the StorSimple device to configure.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-NewName

Specifies the new friendly name of the StorSimple device.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Profile

Specifies an Azure profile.

Type:AzureSMProfile
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SecondaryDnsServer

Specifies a secondary DNS server for the StorSimple device.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-StorSimpleNetworkConfig

Specifies an array of network configuration objectss for interfaces on a device. To obtain a NetworkConfig object, use the New-AzureStorSimpleNetworkConfig cmdlet.

Type:NetworkConfig[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-TimeZone

Specifies a time zone for the device. You can create a TimeZoneInfo object by using the GetSystemTimeZone() method. For example, this command creates a time zone information object for Pacific Standard Time: \[System.TimeZoneInfo\]::GetSystemTimeZones() | where { $_.Id -eq "Pacific Standard Time" }

Type:TimeZoneInfo
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

Inputs

NetworkConfig, TimeZoneInfo

You can pipe a NetworkConfig object or a TimeZoneInfo to this cmdlet.

Outputs

DeviceDetails

This cmdlet returns updated device details for the virtual device.