MSVidWebDVD.SPRM Property

Note  This topic applies to Windows XP Service Pack 1 or later.

The SPRM property retrieves the specified system parameter register.

VidWebDVD.SPRM(
   lIndex As Long
) As Short

Parameters

• lIndex
  Specifies the register to retrieve as a Long. The register number ranges from 0 through 23, inclusive.

Return Value

Returns a Short value representing the contents of the specified register. For a listing of possible return values, see the table under the Remarks section.

Error Codes

If the property fails, Err.Number may be set to one of the following values.

Remarks

This property is read-only. The disc controls system parameter registers (SPRMs). A player application doesn't need to access these registers for any standard navigation functionality. SPRMs represent the status of the player. Each one has a meaning, set by user preferences, disc commands, and other occurrences that an application has no direct control over. An application can read these registers but cannot write to them. To use these registers effectively, you will probably need a more detailed knowledge of the DVD navigation commands than is provided in this documentation. The following table shows the contents of each register. For more detailed information on the register contents, see IDvdInfo2::GetAllSPRMs in the C++ reference section.

Examples

' Returning the property.
sSPRM = VidWebDVD.SPRM(lIndex)

Requirements

See Also

GPRM

MSVidWebDVD Object

Send comments about this topic to Microsoft

Build date: 7/6/2010