MCI_RESUME
The MCI_RESUME command causes a paused device to resume the paused operation. Digital-video, VCR, and waveform-audio devices recognize this command. Although CD audio, MIDI sequencer, and videodisc devices also recognize this command, the MCICDA, MCISEQ, and MCIPIONR device drivers do not support it.
To send this command, call the mciSendCommand function with the following parameters.
MCIERROR mciSendCommand(
MCIDEVICEID wDeviceID,
MCI_RESUME,
DWORD dwFlags,
(DWORD) (LPMCI_GENERIC_PARMS) lpResume
);
Parameters
wDeviceID
Device identifier of the MCI device that is to receive the command message.
dwFlags
MCI_NOTIFY, MCI_WAIT, or, for digital-video and VCR devices, MCI_TEST. For information about these flags, see The Wait, Notify, and Test Flags.
lpResume
Pointer to an MCI_GENERIC_PARMS structure. (Devices with extended command sets might replace this structure with a device-specific structure.)
Return Values
Returns zero if successful or an error otherwise.
Remarks
This command resumes playing and recording without changing the current track position set with MCI_PLAY or MCI_RECORD.
Requirements
** Windows NT/2000/XP:** Included in Windows NT 3.1 and later.
** Windows 95/98/Me:** Included in Windows 95 and later.
** Header:** Declared in Mmsystem.h; include Windows.h.
See Also