IP and networking protocol support in Lync Server 2013

  • Article

 

Topic Last Modified: 2012-09-21

Lync Server 2013 supports the following IP and networking protocols:

  • IP Protocols.   Lync Server 2013 supports either IP version 4 (IPv4) or IP version 6 (IPv6) for the server network.

    Note

    Lync Server 2013 can function in a network with dual IP stack enabled.

  • SIP Transport Protocols.   Generically, SIP can use at least three transport types: User Datagram Protocol (UDP), Transmission Control Protocol (TCP), and Transport Layer Security (TLS). In the default SIP transport configuration, TLS runs over TCP. TLS is used within the Lync Server 2013 network. At the edge of the network, Lync Server 2013 can interoperate over TCP. Lync Server 2013 does not support UDP for SIP transport because it doesn’t meet the minimum standards for enterprise communications security, reliability, and scalability. For details, see the NextHop blog article, "To UDP, or not to UDP, that is the question," at https://go.microsoft.com/fwlink/p/?linkId=185369.

    Note

    The content of each blog and its URL are subject to change without notice.