Errors 19000 - 19999
Error |
Severity |
Event logged |
Description (message text) |
|---|---|---|---|
19030 |
10 |
Yes |
SQL Trace ID %d was started by login "%s". |
19031 |
10 |
Yes |
SQL Trace stopped. Trace ID = '%d'. Login Name = '%s'. |
19032 |
10 |
Yes |
SQL Trace was stopped due to server shutdown. Trace ID = '%d'. This is an informational message only; no user action is required. |
19033 |
10 |
Yes |
Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required. |
19034 |
21 |
Yes |
Cannot start C2 audit trace. SQL Server is shutting down. Error = %ls |
19035 |
16 |
Yes |
OLE task allocator failed to initialize. Heterogeneous queries, distributed queries, and remote procedure calls are unavailable. Confirm that DCOM is properly installed and configured. |
19036 |
10 |
Yes |
The OLE DB initialization service failed to load. Reinstall Microsoft Data Access Components. If the problem persists, contact product support for the OLEDB provider. |
19051 |
16 |
No |
Unknown error occurred in the trace. |
19052 |
16 |
No |
The active trace must be stopped before modification. |
19053 |
16 |
No |
The trace event ID is not valid. |
19054 |
16 |
No |
The trace column ID is not valid. |
19055 |
16 |
No |
Filters with the same event column ID must be grouped together. |
19056 |
16 |
No |
The comparison operator in the filter is not valid. |
19057 |
16 |
No |
The boolean operator in the filter is not valid. |
19058 |
16 |
No |
The trace status is not valid. |
19059 |
16 |
No |
Could not find the requested trace. |
19060 |
16 |
No |
The trace option is not valid. |
19061 |
16 |
No |
Cannot remove SPID trace column. |
19062 |
16 |
No |
Could not create a trace file. |
19063 |
16 |
No |
Not enough memory was available for trace. |
19064 |
16 |
No |
The requested trace stop time has been already passed. |
19065 |
16 |
No |
The parameter is not valid. |
19066 |
16 |
No |
Cannot modify a restricted trace. |
19067 |
16 |
No |
Cannot create a new trace because the trace file path is found in the existing traces. |
19068 |
16 |
No |
The trace file path is not valid or not supported. |
19069 |
16 |
No |
The trace file name is not valid because it contains a rollover file number (NNN in C:\file_NNN) while the trace rollover option is enabled. |
19070 |
16 |
No |
The default trace cannot be stopped or modified. Use SP_CONFIGURE to turn it off. |
19071 |
16 |
No |
Stopping the trace because the current trace file is full and the rollover option is not specified. |
19096 |
16 |
No |
Fail to delete an old trace file '%ls'. Error = '%ls'. |
19097 |
10 |
No |
Windows error occurred while running %s. Error = %s. |
19098 |
16 |
Yes |
An error occurred starting the default trace. Cause: %ls Use sp_configure to turn off and then turn on the 'default trace enabled' advanced server configuration option. |
19099 |
16 |
Yes |
Trace ID '%d' was stopped because of an error. Cause: %ls. Restart the trace after correcting the problem. |
19100 |
10 |
No |
Initialization succeeded. |
19101 |
10 |
No |
Initialization failed with an infrastructure error. Check for previous errors. |
19102 |
10 |
No |
Unable to create a node listener object. Check for memory-related errors. |
19103 |
10 |
No |
An error occurred while starting shared memory support. |
19104 |
10 |
No |
All protocols are disabled. |
19105 |
10 |
No |
Unable to create a node listener object for a special instance. Check for memory-related errors. |
19106 |
10 |
No |
Unable to trim spaces in an IP address. Check TCP/IP protocol settings. |
19107 |
10 |
No |
'TcpKeepAlive' registry setting is the wrong type. Check TCP/IP protocol settings. |
19108 |
10 |
No |
Unable to retrieve 'TcpKeepAlive' registry setting. Check TCP/IP protocol settings. |
19109 |
10 |
No |
Unable to configure MDAC-compatibility TCP/IP port in registry. |
19110 |
10 |
No |
Unable to initialize the TCP/IP listener. |
19111 |
10 |
No |
Unable to open TCP/IP protocol configuration key in registry. |
19112 |
10 |
No |
Unable to retrieve TCP/IP protocol 'Enabled' registry setting. |
19113 |
10 |
No |
Unable to retrieve 'ListenOnAllIPs' TCP/IP registry setting. |
19114 |
10 |
No |
Unable to open TCP/IP protocol's 'IPAll' configuration key in registry. |
19115 |
10 |
No |
Unable to retrieve registry settings from TCP/IP protocol's 'IPAll' configuration key. |
19116 |
10 |
No |
Unable to obtain list size for IP addresses configured for listening in registry. |
19117 |
10 |
No |
Failed to allocate memory for IP addresses configured for listening. Check for memory-related errors. |
19118 |
10 |
No |
Unable to obtain list of IP addresses configured for listening in registry. |
19119 |
10 |
No |
Unable to open TCP/IP protocol's registry key for a specific IP address. |
19120 |
10 |
No |
Unable to retrieve 'Enabled' setting for a specific IP address. |
19121 |
10 |
No |
Unable to retrieve 'Active' setting for a specific IP address. |
19122 |
10 |
No |
Unable to retrieve 'IpAddress' value for a specific IP address. |
19123 |
10 |
No |
'IpAddress' registry value is the wrong type. |
19124 |
10 |
No |
Unable to retrieve registry settings for a specific IP address. |
19125 |
10 |
No |
Unable to deallocate structures representing registry key for a specific IP address. |
19126 |
10 |
No |
Unable to retrieve registry settings for cluster environment. |
19127 |
10 |
No |
Server is configured to listen on a specific IP address in a cluster environment. |
19128 |
10 |
No |
Unable to check for a duplicate IP address in the network. |
19129 |
10 |
No |
A duplicate IP address was detected in the network. |
19130 |
10 |
No |
Unable to open SQL Server Network Interface library configuration key in registry for Dedicated Administrator Connection settings. |
19131 |
10 |
No |
Unable to open Dedicated Administrator Connection configuration key in registry. |
19132 |
10 |
No |
Unable to open TCP/IP configuration key for Dedicated Administrator Connection in registry. |
19133 |
10 |
No |
Unable to retrieve dynamic TCP/IP ports registry settings for Dedicated Administrator Connection. |
19134 |
10 |
No |
No or more than one dynamic TCP/IP port is configured for Dedicated Administrator Connection in registry settings. |
19135 |
10 |
No |
Error starting Named Pipes support. Check protocol settings. |
19136 |
10 |
No |
An error occurred starting VIA support. Check protocol settings. |
19137 |
10 |
No |
Failed to allocate memory SSL listening structures. Check for memory-related errors. |
19138 |
10 |
No |
An error occurred while obtaining or using the certificate for SSL. Check settings in Configuration Manager. |
19139 |
10 |
No |
Unable to add listener endpoints. Check for memory-related errors. |
19140 |
10 |
No |
Unable to initialize the communication listeners. |
19141 |
10 |
No |
Unable to retrieve SQL Server Network Interface library settings for a special instance. |
19142 |
10 |
No |
Unable to retrieve SQL Server Network Interface library settings; the instance name is too long. |
19143 |
10 |
No |
Unable to initialize the Shared Memory listener. |
19144 |
10 |
No |
Unable to initialize the Named Pipes listener. |
19145 |
10 |
No |
Unable to configure MDAC-compatibility Named Pipes protocol pipe name in registry. |
19146 |
10 |
No |
Unable to initialize the VIA listener. |
19147 |
10 |
No |
Unable to initialize the HTTP listener. |
19148 |
10 |
No |
Unable to initialize SSL support. |
19149 |
10 |
No |
Unable to configure MDAC-compatibility protocol list in registry. |
19150 |
10 |
No |
Unable to open SQL Server Network Interface library configuration key in registry. |