_mm_maddsub_pd
Visual Studio 2010 SP1 is required.
Microsoft Specific
Generates the FMA4 XMM instruction vfmaddsubpd to perform an alternating single-round floating-point multiply-add/subtract of its sources.
__m128d _mm_maddsub_pd (
__m128d src1,
__m128d src2,
__m128d src3
);
Parameters
[in] src1
A 128-bit parameter that contains two 64-bit floating-point values.[in] src2
A 128-bit parameter that contains two 64-bit floating-point values.[in] src3
A 128-bit parameter that contains two 64-bit floating-point values.
Return value
A 128-bit result r that contains two 64-bit floating point values.
r[0] := src1[0] * src2[0] - src3[0];
r[1] := src1[1] * src2[1] + src3[1];
Requirements
Intrinsic |
Architecture |
|---|---|
_mm_maddsub_pd |
FMA4 |
Header file <intrin.h>
Remarks
Each of the two double-precision floating-point values in src1 is multiplied by the corresponding value in src2. The low-order source value of src3 is subtracted from its corresponding product, the high-order value is added to its corresponding product, and each result is stored as the corresponding value in the destination. Each multiply-add/subtract pair is performed with a single round at the end, as if intermediate results were computed to infinite precision.
The vfmaddsubpd instruction is part of the FMA4 family of instructions. Before you use this intrinsic, you must ensure that the processor supports this instruction. To determine hardware support for this instruction, call the __cpuid intrinsic with InfoType = 0x80000001 and check bit 16 of CPUInfo[2] (ECX). This bit is 1 when the instruction is supported, and 0 otherwise.
Example
#include <stdio.h>
#include <intrin.h>
int main()
{
__m128d a, b, c, d;
int i;
for (i = 0; i < 2; i++) {
a.m128d_f64[i] = i;
b.m128d_f64[i] = 2.;
c.m128d_f64[i] = 3.;
}
d = _mm_maddsub_pd(a, b, c);
for (i = 0; i < 2; i++) printf_s(" %.3lf", d.m128d_f64[i]);
printf_s("\n");
}
-3.000 5.000