How to: Choose the applications that are recorded in a manual test

  • Article

You can configure the action log diagnostic data adapter for your action log and your action recording. An action log creates a text file where each action is recorded as text. For example, the following text is added if you choose the Add to Cart button: Choose Button "Add to Cart". An action recording records each action. This action recording can be used to play back each user action when you want to fast forward to a particular location in the test again.

If you select the action log diagnostic data adapter in your test settings, an action log is created based on the settings that you configure for the adapter. You can also specify the configuration that will be used for an action recording. These settings that you configured are used if the tester chooses to create an action recording when they run a test.

The settings include the following:

  • Which applications will be recorded

  • Any time delays between actions when you play back your action recording

  • How to capture the delay between actions

For more information about how to play back actions, see Recording and Playing Back Manual Tests.

Requirements

  • Visual Studio Ultimate, Visual Studio Premium, Visual Studio Test Professional

Warning

When a user runs a test using Test Runner, the user can decide whether to create an action recording, override an existing action recording, or not when they start each test. If the action log diagnostic data adapter has not been selected in the test settings for the role that runs the tests, the default values are used when the action recording is created.

Note

In Visual Studio 2012, the ARM architecture is supported for action logs.

The following procedure describes how to configure your diagnostic data adapter from the configuration editor for action log and action recording. To create your tests settings, see Specifying Test Settings in Microsoft Test Manager.

Note

The action log and action recording can be collected only on a local computer when you run manual tests and cannot be collected for automated tests.

Configure recording of user interface actions for playback and as text

Before you follow the steps in this procedure, you must open your test settings for your test plan using Microsoft Test Manager. From the Plan view, select Properties. Select the test settings you want to use from the drop-down list, or select <New> to create a new one.

To configure recording of user interface actions for playback and as text

  1. In the test settings page, select the Data and Diagnostics page.

  2. Select Action log and then choose Configure.

    The Configure Diagnostic Data Adapter – Action log dialog box is displayed.

  3. (Applies to action log and action recording) Under Select applications under test, select one of the following options:

    1. All applications running on the computer except the following. This option will include all the applications that are running during the test in the recording except the applications that are displayed in the list. You can remove applications from the list, or add process names to exclude other applications.

      -or-

    2. Applications in the following list, and then choose the browse button (…) at the end of the list to locate the applications that you want to include during the test recording. If you already know the process name, you can add it.

  4. (Applies to action recording only) Under Recording settings, select Capture user delay between actions if more than: to enable customized delay time settings for an action recording. Then use the spin box next to Capture user delay between actions if more than to configure when you want to capture the delay for the action recording.

  5. (Applies to action recording only) Under Playback settings, configure the following settings:

    1. Use the spin box next to Constant delay between actions to configure how many seconds that you want the action recording to insert as a delay between user actions.

    2. Use the spin box next to Multiplier for user delay between actions to specify a time delay multiplier. For example, a setting of 2 will double how many seconds that you have specified in Delay between actions.

    3. Use the spin box next to Search time for control to configure how many seconds that you want for the action recording to search for controls.

      Under certain circumstances, an application under test might take several seconds before a control becomes available. The Search time for control setting provides some flexibility by instructing the recording to wait for a specified time interval.

  6. Choose Save. The action log and action recording settings are now configured and saved for this test setting.

    Note

    To reset the configuration for this diagnostic data adapter, choose Reset to default.

See Also

Concepts

Setting Up Machines and Collecting Diagnostic Information Using Test Settings

Running Manual Tests Using Test Runner

Recording and Playing Back Manual Tests

Other Resources

Specifying Test Settings in Microsoft Test Manager