RenderStateManager Class (Microsoft.DirectX.Direct3D)

Defines device render states.

Definition

Visual Basic	NotInheritable Public Class RenderStateManager     Inherits Object
C#	public sealed class RenderStateManager : Object
C++	public ref class RenderStateManager sealed : Object
JScript	public final class RenderStateManager extends Object

Members Table

The following table lists the members exposed by the object.

Methods

Method	Description
ToString	Obtains a string representation of the current instance.

Properties

Property	Description
AdaptiveTessellateW	Amount to adaptively tessellate in the w direction. The default value is 0.0f.
AdaptiveTessellateX	Amount to adaptively tessellate in the x direction. The default value is 0.0f.
AdaptiveTessellateY	Amount to adaptively tessellate in the y direction. The default value is 0.0f.
AdaptiveTessellateZ	Amount to adaptively tessellate in the z direction. The default value is 1.0f.
AlphaBlendEnable	Retrieves or sets a value to enable alpha-blended transparency.
AlphaBlendOperation	Retrieves or sets a value to select the arithmetic operation applied to the separate for the alpha channel (also known as separate alpha blending) when the render state, RenderStateManager.SeparateAlphaBlendEnabled, is set to true.
AlphaDestinationBlend	Contains a member of the Blend enumeration that represents the destination .
AlphaFunction	Retrieves or sets the comparison function for the alpha test.
AlphaSourceBlend	Contains a member of the Blend enumeration that represents the source .
AlphaTestEnable	Retrieves or sets a render state that enables a per-pixel alpha test.
Ambient	Retrieves or sets the ambient light color.
AmbientColor	Retrieves or sets the ambient light color.
AmbientMaterialSource	Retrieves or sets the ambient color source for lighting calculations.
AntiAliasedLineEnable	Retrieves or sets antialiasing of lines.
BlendFactor	Retrieves or sets a Color object to use for a constant blend factor during alpha blending.
BlendFactorColor	Retrieves or sets a Color object to use for a constant blend factor during alpha blending.
BlendOperation	Retrieves or sets a value used to select the arithmetic operation to apply when the alpha blend render state, RenderStateManager.AlphaBlendEnable, is set to true.
Clipping	Retrieves or sets a value to enable primitive clipping by Microsoft Direct3D.
ColorVertex	Retrieves or sets a value to enable or disable per-vertex color.
ColorWriteEnable	Retrieves or sets a value that enables a per-channel write for the render target color buffer.
ColorWriteEnable1	Retrieves or sets additional RenderStateManager.ColorWriteEnable values for the device.
ColorWriteEnable2	Retrieves or sets additional RenderStateManager.ColorWriteEnable values for devices.
ColorWriteEnable3	Retrieves or sets additional RenderStateManager.ColorWriteEnable values for devices.
CounterClockwiseStencilFail	Retrieves the StencilOperation or sets it to perform if the counterclockwise (CCW) stencil test fails.
CounterClockwiseStencilFunction	Retrieves or sets the comparison function used by the counterclockwise (CCW) stencil test.
CounterClockwiseStencilPass	Retrieves the StencilOperation or sets it to perform, if both counterclockwise (CCW) stencil and z-tests pass.
CounterClockwiseStencilZBufferFail	Retrieves the StencilOperation or sets it to perform if the counterclockwise (CCW) stencil test passes and the z-test fails.
CullMode	Specifies how back-facing triangles are culled, if at all.
DebugMonitorTokenEnabled	Enables or disables the debug monitor token.
DepthBias	Sets or retrieves the depth bias for polygons.
DestinationBlend	Contains a member of the Blend enumeration that represents the destination .
DiffuseMaterialSource	Retrieves or sets the diffuse color source for lighting calculations.
DitherEnable	Enables or disables dithering.
EmissiveMaterialSource	Retrieves or sets the emissive color source for lighting calculations.
EnableAdaptiveTessellation	Enables or disables adaptive tessellation.
FillMode	Contains a member of the FillMode enumeration that represents the fill mode.
FogColor	Retrieves or sets the fog color.
FogColorValue	Retrieves or sets the fog color.
FogDensity	Retrieves or sets the fog density for pixel or vertex fog used in exponential fog modes.
FogEnable	Enables or disables fog blending.
FogEnd	Retrieves or sets the depth at which pixel or vertex fog effects end for linear fog mode.
FogStart	Retrieves or sets the depth at which pixel or vertex fog effects begin for linear fog mode.
FogTableMode	Retrieves or sets the fog formula to use for pixel fog.
FogVertexMode	Retrieves or sets the fog formula to use for vertex fog.
IndexedVertexBlendEnable	Enables or disables indexed vertex blending.
LastPixel	Enables or disables drawing of the last pixel in a line.
Lighting	Enables or disables Direct3D lighting.
LocalViewer	Specifies whether to use camera-relative specular highlights or orthogonal specular highlights.
MaxTessellationLevel	Retrieves or sets the maximum tessellation level.
MinTessellationLevel	Retrieves or sets the minimum tessellation level.
MultiSampleAntiAlias	Determines how individual samples are computed when using a multisample render target buffer.
MultiSampleMask	Retrieves or sets a render state that enables use of a multisample buffer as an accumulation buffer.
NormalDegree	Retrieves or sets the degree of interpolation (linear, cubic, quadratic, or quintic) using the N-patch normal.
NormalizeNormals	Enables or disables automatic normalization of vertex normals.
PatchEdgeStyle	Retrieves or sets the tessellation mode for patch edges.
PointScaleA	Controls the distance-based size attenuation for point primitives.
PointScaleB	Controls the distance-based size attenuation for point primitives.
PointScaleC	Controls the distance-based size attenuation for point primitives.
PointScaleEnable	Controls how the computation of size for point sprites is handled.
PointSize	Specifies the size to use for point size computation in cases in which point size is not specified for each vertex.
PointSizeMax	Specifies the maximum size to which point sprites can be set.
PointSizeMin	Specifies the minimum size to which point sprites can be set.
PointSpriteEnable	Controls how point sprites are rendered.
PositionDegree	Retrieves or sets the N-patch position interpolation degree.
RangeFogEnable	Retrieves or sets enabling of range-based vertex fog.
ReferenceAlpha	Specifies a reference alpha value against which pixels are tested when alpha testing is enabled.
ReferenceStencil	Specifies a reference value to use for the stencil test.
ScissorTestEnable	Enables or disables scissor testing.
SeparateAlphaBlendEnabled	Enables or disables the separate for the alpha channel.
ShadeMode	Contains one or more members of the ShadeMode enumeration.
SlopeScaleDepthBias	Retrieves or sets a value used to determine how much bias can be applied to coplanar primitives to reduce z-fighting.
SourceBlend	Contains a member of the Blend enumeration.
SpecularEnable	Retrieves or sets a render state that enables specular highlights.
SpecularMaterialSource	Retrieves or sets the specular color source for lighting calculations.
SrgbWriteEnable	Retrieves or sets a render state that enables render-target writes to be gamma corrected to sRGB.
StencilEnable	Retrieves or sets stencil enabling.
StencilFail	Retrieves or sets the stencil operation to perform if the stencil test fails.
StencilFunction	Retrieves or sets the comparison function for the stencil test.
StencilMask	Retrieves or sets the mask applied to the reference value and each stencil buffer entry to determine the significant bits for the stencil test.
StencilPass	Retrieves or sets the stencil operation to perform if both the stencil test and the depth test (z-test) pass.
StencilWriteMask	Retrieves or sets the write mask applied to values written into the stencil buffer.
StencilZBufferFail	Retrieves or sets the stencil operation to perform if the stencil test passes and the depth test (z-test) fails.
TextureFactor	Retrieves or sets the color used for multiple-texture blending with the TextureArgument.TFactor texture blending argument or the TextureOperation.BlendFactorAlpha texture blending operation.
TweenFactor	Retrieves or sets a floating-point value that controls the tween factor.
TwoSidedStencilMode	Enables or disables two-sided stenciling.
UseWBuffer	Enables or disables w-buffering.
VertexBlend	Retrieves or sets the number of matrices to use to perform geometry blending.
Wrap0	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap1	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap10	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap11	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap12	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap13	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap14	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap15	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap2	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap3	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap4	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap5	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap6	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap7	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap8	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
Wrap9	Retrieves or sets the texture-wrapping behavior for multiple sets of texture coordinates.
ZBufferEnable	Enables or disables depth buffering.
ZBufferFunction	Retrieves or sets the comparison function for the z-buffer test.
ZBufferWriteEnable	Enables or disables writing to the depth buffer.

Inheritance Hierarchy

Object

RenderStateManager

Remarks

The Device.RenderState property can be used to obtain the RenderStateManager object for the device.

Class Information

Namespace	Microsoft.DirectX.Direct3D
Assembly	Microsoft.DirectX.Direct3D (microsoft.directx.direct3d.dll)
Strong Name	Microsoft.DirectX.Direct3D,  Version=1.0.900.0,  Culture=neutral,  PublicKeyToken=d3231b57b74a1492