ITU-T H.261
This standard is titled "Video Codec for Audiovisual Services at px64 kbit/s," ITU-T Recommendation H.261. This recommendation contains the same basic design later used in other video codec standards. H.261 uses 8-bit samples with Y, Cb, and Cr components, 4:2:0 sampling, 16x16 macroblock-based motion compensation, 8x8 IDCT, zigzag inverse scanning of coefficients, scalar quantization, and variable-length coding of coefficients based on a combination of zero-valued run-lengths and quantization index values.
All H.261 prediction blocks use forward-only prediction from the previous picture. H.261 does not have half-sample accurate prediction filters, but instead uses a type of low-pass filter called the loop filter (Section 3.2.3 of the H.261 specification) that can be turned off or on during motion compensation prediction for each macroblock.
Annex D Graphics
Recommendation H.261 Annex D Graphic Transfer mode can be supported by reading four decoded pictures from the accelerator back onto the host and interleaving them there for display as a higher-resolution graphic picture.