OID_DOT11_OPERATIONAL_RATE_SET (Windows CE 5.0)
This object identifier specifies the set of data rates at which the station may transmit data.
Each octet contains a value representing a rate. Each rate is between 2 and 127, and corresponds to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and is supported, as indicated in the supported rates table, for receiving data.
This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable.
It is also used when starting a BSS, as specified in 10.3 of ANSI/IEEE Std. 802.11, 1999 Edition.
Requirements
OS Versions: Windows CE .NET 4.1 and later.
Header: Windot11.h.
See Also
802.1x Authentication | Network Drivers
Send Feedback on this topic to the authors