IDirectDrawSurface5::UpdateOverlayZOrder (Windows CE 5.0)

Send Feedback

This method sets the Z-order of an overlay.

HRESULT UpdateOverlayZOrder(DWORD dwFlags, LPDIRECTDRAWSURFACE4 lpDDSReference);

Parameters

  • dwFlags
    The following table shows the possible flags.
    Flag Description
    DDOVERZ_INSERTINBACKOF Inserts this overlay in the overlay chain behind the reference overlay.
    DDOVERZ_INSERTINFRONTOF Inserts this overlay in the overlay chain in front of the reference overlay.
    DDOVERZ_MOVEBACKWARD Moves this overlay one position backward in the overlay chain.
    DDOVERZ_MOVEFORWARD Moves this overlay one position forward in the overlay chain.
    DDOVERZ_SENDTOBACK Moves this overlay to the back of the overlay chain.
    DDOVERZ_SENDTOFRONT Moves this overlay to the front of the overlay chain.
  • lpDDSReference
    Address of the IDirectDrawSurface5 interface for the DirectDraw surface to be used as a relative position in the overlay chain. This parameter is needed only for DDOVERZ_INSERTINBACKOF and DDOVERZ_INSERTINFRONTOF.

Return Values

If the method succeeds, the return value is DD_OK.

If the method fails, the return value may be one of the following error values:

DDERR_INVALIDOBJECT
DDERR_INVALIDPARAMS
DDERR_NOTAOVERLAYSURFACE

Requirements

OS Versions: Windows CE 2.12 and later. Version 2.12 requires DXPAK 1.0 or later.
Header: Ddraw.h.
Link Library: Ddraw.lib.

See Also

IDirectDrawSurface5::EnumOverlayZOrders

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.