BITMAPINFOHEADER (Compact 2013)

  • Article

3/28/2014

This structure contains information about the dimensions and color format of a device-independent bitmap (DIB).

Syntax

typedef struct tagBITMAPINFOHEADER { 
  DWORD biSize; 
  LONG biWidth; 
  LONG biHeight; 
  WORD biPlanes; 
  WORD biBitCount 
  DWORD biCompression; 
  DWORD biSizeImage; 
  LONG biXPelsPerMeter; 
  LONG biYPelsPerMeter; 
  DWORD biClrUsed; 
  DWORD biClrImportant; 
} BITMAPINFOHEADER;

Members

  • biSize
    Specifies the size of the structure, in bytes.

    This size does not include the color table or the masks mentioned in the biClrUsed member.

    See the Remarks section for more information.

  • biWidth
    Specifies the width of the bitmap, in pixels.

  • biHeight
    Specifies the height of the bitmap, in pixels.

    If biHeight is positive, the bitmap is a bottom-up DIB and its origin is the lower left corner.

    If biHeight is negative, the bitmap is a top-down DIB and its origin is the upper left corner.

    If biHeight is negative, indicating a top-down DIB, biCompression must be either BI_RGB or BI_BITFIELDS. Top-down DIBs cannot be compressed.

  • biPlanes
    Specifies the number of planes for the device.

    This value must be set to 1.

  • biBitCount
    Specifies the number of bits per pixel.

    The biBitCount member of the BITMAPINFOHEADER structure determines the number of bits that define each pixel and the maximum number of colors in the bitmap.

    This member must be one of the following values.

    Value

    Description

    1

    The bitmap is monochrome, and the bmiColors member contains two entries.

    Each bit in the bitmap array represents a pixel.

    If the bit is clear, the pixel is displayed with the color of the first entry in the bmiColors table.

    If the bit is set, the pixel has the color of the second entry in the table.

    2

    The bitmap has four possible color values.

    4

    The bitmap has a maximum of 16 colors, and the bmiColors member contains up to 16 entries.

    Each pixel in the bitmap is represented by a 4-bit index into the color table.

    For example, if the first byte in the bitmap is 0x1F, the byte represents two pixels. The first pixel contains the color in the second table entry, and the second pixel contains the color in the sixteenth table entry.

    8

    The bitmap has a maximum of 256 colors, and the bmiColors member contains up to 256 entries. In this case, each byte in the array represents a single pixel.

    16

    The bitmap has a maximum of 2^16 colors.

    If the biCompression member of the BITMAPINFOHEADER is BI_RGB, the bmiColors member is NULL.

    Each WORD in the bitmap array represents a single pixel. The relative intensities of red, green, and blue are represented with 5 bits for each color component.

    The value for blue is in the least significant 5 bits, followed by 5 bits each for green and red.

    The most significant bit is not used. The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.

    24

    The bitmap has a maximum of 2^24 colors, and the bmiColors member is NULL.

    Each 3-byte triplet in the bitmap array represents the relative intensities of blue, green, and red, respectively, for a pixel.

    The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.

    32

    The bitmap has a maximum of 2^32 colors. If the biCompression member of the BITMAPINFOHEADER is BI_RGB, the bmiColors member is NULL. Each DWORD in the bitmap array represents the relative intensities of blue, green, and red, respectively, for a pixel. The high byte in each DWORD is not used. The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.

    If the biCompression member of the BITMAPINFOHEADER is BI_BITFIELDS, the bmiColors member contains three DWORD color masks that specify the red, green, and blue components, respectively, of each pixel.

    Each DWORD in the bitmap array represents a single pixel.

  • biCompression
    Specifies the type of compression for a compressed bottom-up bitmap (top-down DIBs cannot be compressed). This member can be one of the following values.

    Value

    Description

    BI_RGB

    An uncompressed format.

    BI_BITFIELDS

    Specifies that the bitmap is not compressed and that the color table consists of three DWORD color masks that specify the red, green, and blue components of each pixel.

    This is valid when used with 16- and 32-bpp bitmaps.

    BI_ALPHABITFIELDS

    Specifies that the bitmap is not compressed and that the color table consists of four DWORD color masks that specify the red, green, blue, and alpha components of each pixel.

    This is valid when used with 16- and 32-bpp bitmaps.

    You can OR any of the values in the above table with BI_SRCPREROTATE to specify that the source DIB section has the same rotation angle as the destination.

  • biSizeImage
    Specifies the size, in bytes, of the image.

    This may be set to zero for BI_RGB bitmaps.

  • biXPelsPerMeter
    Specifies the horizontal resolution, in pixels per meter, of the target device for the bitmap.

    An application can use this value to select a bitmap from a resource group that best matches the characteristics of the current device.

  • biYPelsPerMeter
    Specifies the vertical resolution, in pixels per meter, of the device for the bitmap

  • biClrUsed
    Specifies the number of color indexes in the color table that are actually used by the bitmap.

    If this value is zero, the bitmap uses the maximum number of colors corresponding to the value of the biBitCount member for the compression mode specified by biCompression.

    If biClrUsed is nonzero and the biBitCount member is less than 16, the biClrUsed member specifies the actual number of colors the graphics engine or device driver accesses.

    If biBitCount is 16 or greater, the biClrUsed member specifies the size of the color table used to optimize performance of the system color palettes.

    If biBitCount equals 16 or 32, the optimal color palette starts immediately following the three DWORD masks.

    If the bitmap is a packed bitmap (a bitmap in which the bitmap array immediately follows the BITMAPINFO header and is referenced by a single pointer), the biClrUsed member must be either zero or the actual size of the color table.

  • biClrImportant
    Specifies the number of color indexes required for displaying the bitmap.

    If this value is zero, all colors are required.

Remarks

The BITMAPINFO structure combines the BITMAPINFOHEADER structure and a color table to provide a complete definition of the dimensions and colors of a DIB.

An application should use the information stored in the biSize member to locate the color table in a BITMAPINFO structure, as follows.

pColor = ((LPSTR)pBitmapInfo + (WORD)(pBitmapInfo->bmiHeader.biSize));

For Windows Embedded Compact versions 1.0 and 1.01, the biBitCount member must be either one or two.

Requirements

Header

windows.h

See Also

Reference

GDI Structures
BITMAPINFO
DIBSECTION