How To Set Up the Internet Authentication Service (Windows Embedded CE 6.0)

1/6/2010

After you have installed Windows Server 2003, have installed and configured Active Directory, have set up the DNS and DHCP servers, and have set up IIS, you must install and configure the Internet Authentication Service (IAS) so that your test environment functions properly when you are running the Wi-Fi Authorization Test Suite.

Procedure

Set up the Internet Authentication Service

1. On the Start menu, click Control Panel.

2. Double-click Add or Remove Programs.

3. Click Add/Remove Windows Components.

4. In the Windows Components Wizard, on the Windows Components page, do the following:

   1. Select the Networking Services check box.
   2. Click Details to see a list of the available Networking Services.

5. On the Networking Services page:

   1. Make sure that both the Domain Name System (DNS) check box and the Dynamic Host Configuration Protocol (DHCP) check box are selected.

   2. Select the Internet Authentication Service check box, and select the Simple TCP/IP Services check box.

      Note

         The Echo service component, which is required, is automatically installed when you install the Simple TCP/IP services.

6. Click OK to begin installation of the added networking services.

   When the installation is finished, the Windows Components Wizard indicates that the installation was successful.

7. Click Finish.

   Now you must register the Internet Authorization Service in Active Directory.

Register the Internet Authentication Service

1. On the Start menu, click Administrative Tools.

2. In Administrative Tools, open the Internet Authentication Service management console.

3. In the Internet Authentication Service management console, in the left pane of the window, select Internet Authentication Service (Local), as illustrated in the following figure.

   

4. On the menu bar, click Action.

5. On the Action menu, click Register Server in Active Directory.

6. In the Register Internet Authentication Server in Active Directory message that opens, click OK.

See Also

Other Resources

How To Set Up Authentication Servers on Windows Server 2003
Wi-Fi Authentication Tests