Prerequisites for the EDB Build Verification Test (Windows Embedded CE 6.0)

1/6/2010

There are no hardware requirements for the EDB Build Verification Test.

The following table shows the software requirements for the EDB Build Verification Test.

Requirement Description

Tux.exe

Test harness, required for executing the test.

Kato.dll

Logging engine, required for logging test data.

Edbtst.dll

Test library.

Note

There must be at least 0.5 megabytes (MB) of free space in the root directory of the target device. If there is not sufficient space in the root directory of the target device, the test cannot run properly.

See Also

Other Resources

EDB Build Verification Test