NDIS_STATUS_DOT11_MPDU_MAX_LENGTH_CHANGED (Compact 2013)

  • Article

3/26/2014

A miniport driver must make an NDIS_STATUS_DOT11_MPDU_MAX_LENGTH_CHANGED indication after the maximum media access control (MAC) protocol data unit (MPDU) frame size is changed for a PHY on the 802.11 station.

The data type for this indication is the DOT11_MPDU_MAX_LENGTH_INDICATION structure:

The miniport driver calls NdisMIndicateStatusEx to make an NDIS_STATUS_DOT11_MPDU_MAX_LENGTH_CHANGED indication, and must pass a pointer to an NDIS_STATUS_INDICATION structure through the StatusIndication parameter.

When it makes this indication, the miniport driver must set the members of the NDIS_STATUS_INDICATION structure to the following values:

  • StatusCode
    This member must be set to NDIS_STATUS_DOT11_MPDU_MAX_LENGTH_CHANGED
  • StatusBuffer
    This member must be set to the address of a DOT11_MPDU_MAX_LENGTH_INDICATION structure
  • StatusBufferSize
    This member must be set to sizeof(DOT11_MPDU_MAX_LENGTH_INDICATION)

Requirements

Header

ndis.h

See Also

Reference

General Native 802.11 Status Indications
DOT11_MPDU_MAX_LENGTH_INDICATION
NdisMIndicateStatusEx
NDIS_STATUS_INDICATION
NDIS_STATUS_DOT11_SCAN_CONFIRM