Setting up the Intel DBPXA250 Development Platform Hardware

  • Article

The following steps show you how to connect the Intel DBPXA250 Development Platform to a development workstation.

To set up the Intel DBPXA250 development platform hardware

  1. Connect a keyboard and a mouse.

  2. Connect an Ethernet cable to the built-in SMC port.

    - or -

    Connect an Ethernet cable to a CF PCMCIA NE2000 network adapter. This requires you to choose NE2000 in the loader menu.

  3. Connect a NULL modem cable to the RS232 serial port connector labeled FF_SERIAL.

    This is the serial port closest to the front of the main board.

  4. Connect a power cable to the front right connector.

  5. Modify the Intel DBPXA250 development platform switches and jumpers.

    For more information, see Modifying the Intel DBPXA250 Development Platform Switches and Jumpers.

See Also

How to Use the BSP for the Intel XScale DBPXA250 Development Platform

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.