Windows CE Boot Loader Output for the Intel DBPXA250 Development Platform
The following text shows the Windows CE boot loader output for the Intel DBPXA250 development platform.
Beginning System Initialization SDCLK[1] = MemClk MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = 2 * Run Mode Mode: TURBO
Beginning SDRAM Scrub...
SDRAM Scrub Complete
**************************************************** **************************************************** **************************************************** **************************************************** **************************************************** OEMInitDebugSerial using UART1
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Feb 13
2003 18:44:47
Copyright (c) 2000-2001 Microsoft Corporation
Microsoft Windows CE Ethernet Bootloader 3.3 for the Intel DBPXA250 Development
Platform (Built Feb 15 2003)
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds.
Checking for SMC 91C96 Ethernet controller...
Entering SMCInit
SMC Ethernet card detected at I/O base 0xBF500000
SMC MAC Address: 0:2:179:146:165:26
SMC Ethernet card Config_Reg=20B1
SMC Ethernet card Config_Base=1867
SMC Ethernet card Switch=3F
SMC config reg val: 000032B1
SMC Reset complete2
SMC 91C96 Ethernet controller initialized.
System ready!
Preparing for download...
INFO: Using device name: 'XSC1BD42266'
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 10.199.14.143
!CheckUDP: Not UDP (proto = 0x00000001)
ProcessDHCP()::DHCP IP Address Resolved as 10.199.14.143, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 10.199.14.143
No ARP response in 2 seconds, assuming ownership of 10.199.14.143
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
.
.
.
If you press the SPACEBAR to break into the configuration menu, you will see the following output:
Beginning System Initialization SDCLK[1] = MemClk MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = 2 * Run Mode Mode: TURBO
Beginning SDRAM Scrub...
SDRAM Scrub Complete
**************************************************** **************************************************** **************************************************** **************************************************** **************************************************** OEMInitDebugSerial using UART1
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Feb 13
2003 18:44:47
Copyright (c) 2000-2001 Microsoft Corporation
Microsoft Windows CE Ethernet Bootloader 3.3 for the Intel DBPXA250 Development
Platform (Built Feb 15 2003)
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 3 seconds.
Ethernet Boot Loader Configuration:
0) IP address: 192.168.80.2
1) Subnet mask: 255.255.0.0
2) Boot delay: 5 seconds
3) DHCP: Enabled
4) Reset to factory default configuration
5) Download new image at startup
6) Program RAM image into FLASH: (Disabled)
7) Program SMSC MAC address
8) Boot device order: SMSC -> PCMCIA -> CF
9) Check image signature(s): (Disabled)
D) Download image now
F) Format flash (will not overwrite eboot or eboot parameters)
L) Launch existing flash resident image now
Enter your selection:
See Also
How to Use the BSP for the Intel XScale DBPXA250 Development Platform
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.