REMOTE_NDIS_RESET_MSG

  • Article

This message is sent by the host to a Remote NDIS device to reset the device and return status. The host may send REMOTE_NDIS_RESET_MSG to the device through the control channel at any time that the device is in either the rndis-initialized or rndis-data-initialized state. The Remote NDIS device responds to this message by sending a REMOTE_NDIS_RESET_CMPLT to the host.

REMOTE_NDIS_RESET_MSG
(UINT32) NdisMessageType;
(UINT32) MessageLength;
(UINT32) Reserved;

Parameters

  • NdisMessageType
    Specifies the RNDIS message type, which is set to REMOTE_NDIS_RESET_MSG.
  • MessageLength
    Specifies the total length of this RNDIS message in bytes.
  • Reserved
    Set to 0. Reserved.

Return Values

None.

Remarks

All RNDIS messages start with two UINT32 fields, NdisMessageType and MessageLength that identify the type of message being sent and its length. All messages that expect a response from a remote device and all responses to such messages from a remote device also include a third UINT32 field, RequestId, that is used to match device responses to host sent messages.

Requirements

OS Versions: Windows CE .NET 4.0 and later.
Header: Rndis.h.

See Also

REMOTE_NDIS_RESET_CMPLT

 Last updated on Tuesday, May 18, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.