General Firewall Rule Examples

These examples show general rules that you can create for the IP Firewall.

In This Section

• Restrict Outbound Traffic to Selected TCP Ports
  This rule restricts outbound traffic to selected TCP ports.
• Allow Inbound IPSec (IPv6) Traffic to Private Hosts
  This rule allows inbound IPSec traffic to specific private hosts or to all private hosts.
• Log Blocked Inbound Packets
  These rules log blocked inbound packets.
• Create Rules for an IPv6 Subnet
  These rules apply to an IPv6 subnet.
• Create Rules Based on Time
  These rules block or allow traffic based on time.

Related Sections

• Firewall Rule Examples
  These examples show IP Firewall rules by protocol type, as well as general rules.
• Default IP Firewall Rules
  This section describes the default set of firewall rules that are required to provide security and interoperability.
• FW_RULE
  This structure describes a firewall rule.

 Last updated on Tuesday, May 18, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.