DMR support for WMV video (WMV-01 WMV-05)

  • Article

This test verifies that a digital media renderer (DMR) is able to decode and render certain WMV profiles (WMV-01) and declares these Profile IDs in the SinkProtocolInfo state variable (WMV-05), as specified below.

WMV-01

An A/V DMR must decode and render content identified with the following Profile IDs:

  • WMVMED_BASE

  • WMVMED_FULL

  • WMVHIGH_FULL

WMV-05

An A/V DMR must declare these Profile IDs in the list of supported profiles exposed in the SinkProtocolInfo state variable available as part of the Connection Manager Service (CMS).

Test details

Associated requirements

Device.Media.DMR.AV.WMV

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows 8.1 x64 Windows 8.1 x86

Expected run time

~5 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Digital Media Renderer Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Media Testing.

More information

Parameters

Parameter Description

WDKData_DeviceUUID

The Device ID

 

Command syntax

Command option Description

NetMediaLogoTests.exe NETMEDIA_0114 /dmrID= [Query WDKData_DeviceUUID]

Runs the test.

 

Note  

For command-line help for this test binary, type /h.

 

File list

File Location

NetMediaLogoTests.exe

<testbinroot>\nttest\multimediatest\sharing\netmedialogotests

 

 

 

Send comments about this topic to Microsoft