OID_DOT11_TEMP_TYPE

Important  The Native 802.11 Wireless LAN interface is deprecated in Windows 10 and later. Please use the WLAN Device Driver Interface (WDI) instead. For more information about WDI, see WLAN Universal Windows driver model.

When queried, the OID_DOT11_TEMP_TYPE object identifier (OID) requests that the miniport driver return the value of the IEEE 802.11 dot11TempType management information base (MIB) object for the current PHY type on the 802.11 station.

This MIB object specifies the operating temperature range of the current PHY type.

The data type for OID_DOT11_TEMP_TYPE is the DOT11_TEMP_TYPE enumeration.

If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID MIB object. This MIB object specifies the index of the current PHY type within the 802.11 station's list of supported PHY types. For more information about msDot11CurrentPhyID, see OID_DOT11_CURRENT_PHY_ID.

Note  A Native 802.11 miniport driver that is designed to run on the Windows Vista or Windows Server 2008 operating systems must always reset this 802.11 MIB OID to its default value. This is the case regardless of the value of the bSetDefaultMIB member of the DOT11_RESET_REQUEST structure. This requirement applies to a miniport driver that, in a call to the NdisMSetMiniportAttributes function, sets MiniportAttributes -> Native_802_11_Attributes -> Header -> Revision to NDIS_MINIPORT_ADAPTER_802_11_ATTRIBUTES_REVISION_1.

Requirements

See also

Native 802.11 MIB OIDs

Native 802.11 Wireless LAN OIDs