Create an Inbound Port Rule on Windows 8, Windows 7, Windows Vista, Windows Server 2012, Windows Server 2008, or Windows Server 2008 R2
Applies To: Windows Server 2012
To allow inbound network traffic on only a specified TCP or UDP port number, use the Windows Firewall with Advanced Security node in the Group Policy Management MMC snap-in to create firewall rules. This type of rule allows any program that listens on a specified TCP or UDP port to receive network traffic sent to that port.
Administrative credentials
To complete these procedures, you must be a member of the Domain Administrators group, or otherwise be delegated permissions to modify the GPOs.
This topic describes how to create a standard port rule for a specified protocol or TCP or UDP port number. For other inbound port rule types, see:
To create an inbound port rule
Open the Group Policy Management Console to Windows Firewall with Advanced Security.
In the navigation pane, click Inbound Rules.
Click Action, and then click New rule.
On the Rule Type page of the New Inbound Rule Wizard, click Custom, and then click Next.
Note
Although you can create rules by selecting Program or Port, those choices limit the number of pages presented by the wizard. If you select Custom, you see all of the pages, and have the most flexibility in creating your rules.
On the Program page, click All programs, and then click Next.
Note
This type of rule is often combined with a program or service rule. If you combine the rule types, you get a firewall rule that limits traffic to a specified port and allows the traffic only when the specified program is running. The specified program cannot receive network traffic on other ports, and other programs cannot receive network traffic on the specified port. If you choose to do this, follow the steps in the Create an Inbound Program or Service Rule on Windows 8, Windows 7, Windows Vista, Windows Server 2012, Windows Server 2008, or Windows Server 2008 R2 procedure in addition to the steps in this procedure to create a single rule that filters network traffic using both program and port criteria.
On the Protocol and Ports page, select the protocol type that you want to allow. To restrict the rule to a specified port number, you must select either TCP or UDP. Because this is an incoming rule, you typically configure only the local port number.
If you select another protocol, then only packets whose protocol field in the IP header match this rule are permitted through the firewall.
To select a protocol by its number, select Custom from the list, and then type the number in the Protocol number box.
When you have configured the protocols and ports, click Next.
On the Scope page, you can specify that the rule applies only to network traffic to or from the IP addresses entered on this page. Configure as appropriate for your design, and then click Next.
On the Action page, select Allow the connection, and then click Next.
On the Profile page, select the network location types to which this rule applies, and then click Next.
Note
If this GPO is targeted at server computers running Windows Server 2008 that never move, consider modifying the rules to apply to all network location type profiles. This prevents an unexpected change in the applied rules if the network location type changes due to the installation of a new network card or the disconnection of an existing network card’s cable. A disconnected network card is automatically assigned to the Public network location type.
On the Name page, type a name and description for your rule, and then click Finish.
If you arrived at this page by clicking a link in a checklist, use your browser’s Back button to return to the checklist.