FWPS_INCOMING_METADATA_VALUES0 structure (fwpsk.h)

The FWPS_INCOMING_METADATA_VALUES0 structure defines metadata values that the filter engine passes to a callout's classifyFn callout function.

Note

FWPS_INCOMING_METADATA_VALUES0 is a specific version of FWPS_INCOMING_METADATA_VALUES. See WFP Version-Independent Names and Targeting Specific Versions of Windows for more information.

Syntax

typedef struct FWPS_INCOMING_METADATA_VALUES0_ {
  UINT32                          currentMetadataValues;
  UINT32                          flags;
  UINT64                          reserved;
  FWPS_DISCARD_METADATA0          discardMetadata;
  UINT64                          flowHandle;
  UINT32                          ipHeaderSize;
  UINT32                          transportHeaderSize;
  FWP_BYTE_BLOB                   *processPath;
  UINT64                          token;
  UINT64                          processId;
  UINT32                          sourceInterfaceIndex;
  UINT32                          destinationInterfaceIndex;
  ULONG                           compartmentId;
  FWPS_INBOUND_FRAGMENT_METADATA0 fragmentMetadata;
  ULONG                           pathMtu;
  HANDLE                          completionHandle;
  UINT64                          transportEndpointHandle;
  SCOPE_ID                        remoteScopeId;
  WSACMSGHDR                      *controlData;
  ULONG                           controlDataLength;
  FWP_DIRECTION                   packetDirection;
  PVOID                           headerIncludeHeader;
  ULONG                           headerIncludeHeaderLength;
  IP_ADDRESS_PREFIX               destinationPrefix;
  UINT16                          frameLength;
  UINT64                          parentEndpointHandle;
  UINT32                          icmpIdAndSequence;
  DWORD                           localRedirectTargetPID;
  SOCKADDR                        *originalDestination;
  HANDLE                          redirectRecords;
  UINT32                          currentL2MetadataValues;
  UINT32                          l2Flags;
  UINT32                          ethernetMacHeaderSize;
  UINT32                          wiFiOperationMode;
  NDIS_SWITCH_PORT_ID             vSwitchSourcePortId;
  NDIS_SWITCH_NIC_INDEX           vSwitchSourceNicIndex;
  NDIS_SWITCH_PORT_ID             vSwitchDestinationPortId;
  UINT32                          padding0;
  USHORT                          padding1;
  UINT32                          padding2;
  HANDLE                          vSwitchPacketContext;
  PVOID                           subProcessTag;
  UINT64                          reserved1;
} FWPS_INCOMING_METADATA_VALUES0;

Members

currentMetadataValues

A UINT32 value that contains a bitwise OR of a combination of Metadata Field Identifiers that specify which metadata values are set in the structure.

flags

Used internally by the filter engine. Callout drivers should ignore this member.

reserved

Reserved for system use. Callout drivers should ignore this member.

discardMetadata

An FWPS_DISCARD_METADATA0 structure that describes the reason why the data was discarded. This member contains valid data only if the FWPS_METADATA_FIELD_DISCARD_REASON flag is set in the currentMetadataValues member.

flowHandle

A handle for the data flow. This member contains valid data only if the FWPS_METADATA_FIELD_FLOW_HANDLE flag is set in the currentMetadataValues member.

ipHeaderSize

The offset, in bytes, of the IP header.

On inbound paths, ipHeaderSize, when used in conjunction with the transportHeaderSize member, specifies the number of bytes to retreat from the data offset location to the beginning of the IP header.

On the following inbound ICMP error layers, ipHeaderSize alone specifies the total number of bytes to retreat from the data offset to the beginning of the IP header:

FWPS_LAYER_INBOUND_ICMP_ERROR_V4

FWPS_LAYER_INBOUND_ICMP_ERROR_V6

FWPS_LAYER_INBOUND_ICMP_ERROR_V4_DISCARD

FWPS_LAYER_INBOUND_ICMP_ERROR_V6_DISCARD

On outbound paths, if ipHeaderSize is greater than zero, it specifies the number of bytes to advance from the data offset location to the end of the IP header.

This member is not applicable to the outbound path at the following layers:

FWPS_LAYER_DATAGRAM_DATA_V4

FWPS_LAYER_DATAGRAM_DATA_V6

FWPS_LAYER_DATAGRAM_DATA_V4_DISCARD

FWPS_LAYER_DATAGRAM_DATA_V6_DISCARD

This member contains valid data only if the FWPS_METADATA_FIELD_IP_HEADER_SIZE flag is set in the currentMetadataValues member.

transportHeaderSize

The offset or size, in bytes, of the transport header.

On inbound paths, transportHeaderSize specifies the number of bytes to retreat from the data offset location to the end of the transport header.

On the following inbound ICMP error layers, transportHeaderSize specifies the size of the ICMP header:

  • FWPS_LAYER_INBOUND_ICMP_ERROR_V4
  • FWPS_LAYER_INBOUND_ICMP_ERROR_V6
  • FWPS_LAYER_INBOUND_ICMP_ERROR_V4_DISCARD
  • FWPS_LAYER_INBOUND_ICMP_ERROR_V6_DISCARD

On outbound paths, transportHeaderSize specifies the number of bytes to advance from the data offset location to the end of the transport header.

This member contains valid data only if the FWPS_METADATA_FIELD_TRANSPORT_HEADER_SIZE flag is set in the currentMetadataValues member.

processPath

A pointer to an FWP_BYTE_BLOB structure that contains the full path to the process that owns the endpoint. This member contains valid data only if the FWPS_METADATA_FIELD_PROCESS_PATH flag is set in the currentMetadataValues member.

token

A handle for the token used to validate the permissions for the user. This member contains valid data only if the FWPS_METADATA_FIELD_TOKEN flag is set in the currentMetadataValues member.

processId

The process ID for the process that owns the endpoint. This member contains valid data only if the FWPS_METADATA_FIELD_PROCESS_ID flag is set in the currentMetadataValues member.

sourceInterfaceIndex

The index of the network interface where an incoming packet was received. This member contains valid data only if the FWPS_METADATA_FIELD_SOURCE_INTERFACE_INDEX flag is set in the currentMetadataValues member.

destinationInterfaceIndex

The index of the network interface where an outgoing packet is to be sent. This member contains valid data only if the FWPS_METADATA_FIELD_DESTINATION_INTERFACE_INDEX flag is set in the currentMetadataValues member.

compartmentId

The identifier of the routing compartment in which the packet either was received or is being sent. Any modified packets should be injected back into the same routing compartment that is indicated for the original packet. This member contains valid data only if the FWPS_METADATA_FIELD_COMPARTMENT_ID flag is set in the currentMetadataValues member.

fragmentMetadata

An FWPS_INBOUND_FRAGMENT_METADATA0 structure that describes the fragment data for a received packet fragment. This member contains valid data only if the FWPS_METADATA_FIELD_FRAGMENT_DATA flag is set in the currentMetadataValues member.

pathMtu

The path maximum transmission unit (path MTU) for an outbound packet. This value indicates the largest physical packet size, in bytes, that a network can transmit without fragmentation, This member contains valid data only if the FWPS_METADATA_FIELD_PATH_MTU flag is set in the currentMetadataValues member.

completionHandle

A completion handle that is required to pend the current filtering operation. This member contains valid data only if the FWPS_METADATA_FIELD_COMPLETION_HANDLE flag is set in the currentMetadataValues member.

transportEndpointHandle

An endpoint handle that indicates the end of the packet to be injected into the outbound transport layer. This member contains valid data only if the FWPS_METADATA_FIELD_TRANSPORT_ENDPOINT_HANDLE flag is set in the currentMetadataValues member.

remoteScopeId

The remote scope identifier to be used in outbound transport layer injection. This member contains valid data only if the FWPS_METADATA_FIELD_REMOTE_SCOPE_ID flag is set in the currentMetadataValues member.

controlData

An optional socket control data object. This member contains valid data only if the FWPS_METADATA_FIELD_TRANSPORT_CONTROL_DATA flag is set in the currentMetadataValues member. For information about the WSACMSGHDR type, see CMSGHDR.

controlDataLength

The length, in bytes, of the controlData member.

packetDirection

The direction of network traffic (inbound or outbound) as specified by one of the constant values of FWP_DIRECTION. This member is set at the application layer enforcement (ALE) connect or receive/accept layers during a reauthorization classify operation. For more information, see the Remarks section.

Note

This member contains valid data only if the FWPS_METADATA_FIELD_PACKET_DIRECTION flag is set in the currentMetadataValues member.

headerIncludeHeader

A pointer to the IP header if the packet is sent from a raw socket.

headerIncludeHeaderLength

The length, in bytes, of the IP header that is pointed to by headerIncludeHeader.

destinationPrefix

The destination prefix.

frameLength

The frame length.

parentEndpointHandle

The handle of the endpoint's parent.

icmpIdAndSequence

The ICMP identifier and sequence.

localRedirectTargetPID

The PID of the process that is responsible for a redirected connection.

originalDestination

The original destination of a redirected connection.

redirectRecords

A redirect records handle that can be passed to the FwpsQueryConnectionRedirectState0 function to get the redirect state.

currentL2MetadataValues

A bitmask that contains flags that specify which layer 2 values are set. One or more values can be combined with a bitwise OR.

Value Meaning
FWPS_L2_METADATA_FIELD_ETHERNET_MAC_HEADER_SIZE The value of the ethernetMacHeaderSize member indicates the size of the MAC header.
FWPS_L2_METADATA_FIELD_WIFI_OPERATION_MODE The value of the wiFiOperationMode member indicates current Native 802.11 operation mode.
FWPS_L2_METADATA_FIELD_VSWITCH_SOURCE_PORT_ID The value of the vSwitchSourcePortId member indicates the identifier for the source port on the virtual switch.
FWPS_L2_METADATA_FIELD_VSWITCH_SOURCE_NIC_INDEX The value of the vSwitchSourceNicIndex member indicates the index for the source NIC on the virtual switch.
FWPS_L2_METADATA_FIELD_VSWITCH_PACKET_CONTEXT The value of the vSwitchPacketContext member indicates a HANDLE to the virtual switch packet context.
FWPS_L2_METADATA_FIELD_VSWITCH_DESTINATION_PORT_ID The value of the vSwitchDestinationPortId member indicates the identifier for the destination port on the virtual switch.

l2Flags

A bitmask containing layer 2 flags that can be combined with a bitwise OR.

Value Meaning
FWPS_L2_INCOMING_FLAG_IS_RAW_IPV4_FRAMING Indicates raw IP4 framing.
FWPS_L2_INCOMING_FLAG_IS_RAW_IPV6_FRAMING Indicates raw IP6 framing.
FWPS_L2_INCOMING_FLAG_RECLASSIFY_MULTI_DESTINATION This flag indicates that an NBL that was seen once at ingress has been distributed into multiple NBLs, each of which is destined to a different VM, and the first NBL of this distribution has already been indicated to your callout driver.

The first NBL of the distributed group will not have this flag set. All subsequent NBLs for the group will have this flag set.

For the purpose of injecting, your callout driver should clone the NBL, block and absorb the original packet, and clear the FWPS_RIGHT_ACTION_WRITE flag for the first indication. Then modify the clone and inject it into the ingress path.

For all subsequent indications, you should block and absorb the original packet and clear the FWPS_RIGHT_ACTION_WRITE flag for the clone. When the injected clone comes out of ingress, it will then be redistributed again, and all indications will have an injection state of FWPS_PACKET_INJECTED_BY_SELF or FWPS_PACKET_PREVIOUSLY_INJECTED_BY_SELF.

ethernetMacHeaderSize

The size, in bytes, of the MAC header if the FWPS_L2_METADATA_FIELD_802_3_MAC_HEADER_SIZE flag is set. This flag is set for the inbound 802.3 layer only.

wiFiOperationMode

The current Native 802.11 operation mode if the FWPS_L2_METADATA_FIELD_802_11_OPERATION_MODE flag is set. For more information, see DOT11_CURRENT_OPERATION_MODE.

vSwitchSourcePortId

A unique identifier for the source port on the virtual switch.

vSwitchSourceNicIndex

A index for the source NIC on the virtual switch.

vSwitchDestinationPortId

A unique identifier for the destination port on the virtual switch.

padding0

Reserved.

padding1

Reserved.

padding2

Reserved.

vSwitchPacketContext

A handle to the virtual switch packet context.

subProcessTag

Reserved.

reserved1

Reserved.

Remarks

The filter engine passes a pointer to an FWPS_INCOMING_METADATA_VALUES0 structure to a callout's classifyFn callout function. The metadata values contained in the structure are not processed by the filter engine but are supplied to a callout's classifyFn callout function to provide additional information.

A callout driver can use the following macro to test if a specific metadata value is present in an FWPS_INCOMING_METADATA_VALUES0 structure:

FWPS_IS_METADATA_FIELD_PRESENT(metadataValues, metadataField)

If the FWPS_METADATA_FIELD_PACKET_DIRECTION metadata value is present in an FWPS_INCOMING_METADATA_VALUES0 structure, the packetDirection member specifies whether the packet was inbound or outbound during a reauthorization classify operation. Otherwise, the FWPS_METADATA_FIELD_PACKET_DIRECTION metadata value is not present.

The callout driver must follow these guidelines when it inspects the packet:

  • At the ALE connect or receive/accept layers, the callout driver should not assume that the packet contains a valid IP header if packetDirection is set to FWP_DIRECTION_OUTBOUND and the FWPS_METADATA_FIELD_PACKET_DIRECTION metadata value is present.
  • At the ALE connect layer, if the FWPS_METADATA_FIELD_PACKET_DIRECTION metadata value is not present, the callout driver should assume a packet direction of FWP_DIRECTION_OUTBOUND.
  • At the ALE receive/accept layer, if the FWPS_METADATA_FIELD_PACKET_DIRECTION metadata value is not present, the callout driver should assume a packet direction of FWP_DIRECTION_INBOUND.

Requirements

Requirement Value
Minimum supported client Available starting with Windows Vista.
Header fwpsk.h (include Fwpsk.h)

See also