TAPE_ERROR_ROUTINE callback function (minitape.h)

TAPE_ERROR_ROUTINE provides device-specific error handling when an SRB is completed with an error status. This routine is optional.

Syntax

TAPE_ERROR_ROUTINE TapeErrorRoutine;

void TapeErrorRoutine(
  [in]      PVOID MinitapeExtension,
  [in]      PSCSI_REQUEST_BLOCK Srb,
  [in, out] PTAPE_STATUS TapeStatus
)
{...}

Parameters

[in] MinitapeExtension

Pointer to the driver-specific minitape extension. This is NULL if the miniclass driver did not request a minitape extension when it initialized.

[in] Srb

Pointer to the SRB for the operation that failed.

[in, out] TapeStatus

Pointer to the TAPE_STATUS set by the tape class driver. The tape miniclass driver can change the TAPE_STATUS or leave it unchanged.

Return value

None

Remarks

Most tape miniclass drivers do not provide a TAPE_ERROR_ROUTINE routine because the TAPE_STATUS codes set by the tape class driver are appropriate.

For some devices, however, a tape miniclass driver can identify a more appropriate error code than the tape class driver. For example, if the tape class driver returns TAPE_STATUS_BUS_RESET, the tape miniclass driver might be able to determine that the real problem is more accurately represented by TAPE_STATUS_NO_MEDIA for some devices.

A tape miniclass driver optionally specifies an entry point for its TAPE_ERROR_ROUTINE routine in the TAPE_INIT_DATA_EX structure it passes to TapeClassInitialize from its DriverEntry routine. For such a miniclass driver, when an error occurs during a read, write, or device-control command, the tape class driver sets an appropriate TAPE_STATUS code and calls the miniclass driver's TAPE_ERROR_ROUTINE routine with the minitape extension, the failed SRB, and the TAPE_STATUS code that would be returned.

TAPE_ERROR_ROUTINE determines whether to alter the status provided by the tape class driver based on the input parameters and its knowledge of the device. If the SRB_STATUS_AUTOSENSE_VALID bit is set in Srb->SrbStatus, then the SRB contains SCSI sense information at SenseInfoBuffer. The length of the buffer is SenseInfoBufferLength. The TAPE_ERROR_ROUTINE routine should examine this information along with the SrbStatus and ScsiStatus in the SRB to determine whether to change the TAPE_STATUS returned.

Requirements

See also

DriverEntry of Tape Miniclass Driver

SCSI_REQUEST_BLOCK

TAPE_INIT_DATA_EX

TAPE_STATUS

TapeClassInitialize