PROTOCOL_CM_CLOSE_CALL callback function (ndis.h)

Article
10/21/2021

The ProtocolCmCloseCall function is a required function that terminates an existing call and releases any resources that the call manager allocated for the call.

Note You must declare the function by using the PROTOCOL_CM_CLOSE_CALL type. For more information, see the following Examples section.

Syntax

PROTOCOL_CM_CLOSE_CALL ProtocolCmCloseCall;

NDIS_STATUS ProtocolCmCloseCall(
  [in]           NDIS_HANDLE CallMgrVcContext,
  [in, optional] NDIS_HANDLE CallMgrPartyContext,
  [in, optional] PVOID CloseData,
  [in, optional] UINT Size
)
{...}

Parameters

[in] CallMgrVcContext

Specifies the handle to a call manager-allocated context area in which the call manager maintains its per-VC state. This handle was provided to NDIS from the call managers ProtocolCmMakeCall function.

[in, optional] CallMgrPartyContext

Specifies the handle, if any, to a call manager-allocated context area in which the call manager maintain information about a party on a multipoint VC. This handle is NULL if the call being closed is not a multipoint call.

[in, optional] CloseData

Pointer to a buffer containing connection-oriented client-specified data that should be sent across the connection before the call is terminated. This parameter is NULL if the underlying network medium does not support transfers of data when closing a connection.

[in, optional] Size

Specifies the length, in bytes, of the buffer at CloseData, zero if CloseData is NULL.

Return value

ProtocolCmCloseCall returns the status of its operation(s) as one of the following:

Return code	Description
NDIS_STATUS_SUCCESS	Indicates that the call manager successfully terminated the call.
NDIS_STATUS_PENDING	Indicates that the call manager will complete the request to terminate the call asynchronously. When the call manager has completed all operations required to terminate the connection, it must then call NdisCmCloseCallComplete to signal NDIS that the call has been closed.
NDIS_STATUS_INVALID_DATA	Indicates that CloseData was specified, but the underlying network medium does not support sending data concurrent with terminating a call.
NDIS_STATUS_XXX	Indicates that the call manager could not terminate the call. The actual error returned can be a status propagated from another NDIS library routine.

Remarks

ProtocolCmCloseCall communicated with network control devices or other media-specific actors, as necessitated by its media, to terminate a connection between the local node and a remote node. If the call manager is required to communicate with network control devices (such as a networking switch) it should use a virtual connection to the network control device that it established in its ProtocolBindAdapterEx function. Stand-alone call managers communicate to such network devices by calling NdisCoSendNetBufferLists. Miniport drivers with integrated call-management support never call NdisCoSendNetBufferLists. Instead, they transmit the data directly across the network.

If CloseData is non-NULL and sending data at connection termination is supported by the media that this call manager handles, the call manager should transmit the data specified at CloseData to the remote node before completing the call termination. If sending data concurrent with a connection being terminated is not supported, call managers should return NDIS_STATUS_INVALID_DATA.

If ProtocolCmCloseCall is passed an explicit CallMgrPartyContext, then the call being terminated is a multipoint VC, and the call manager must perform any necessary network communication with its networking hardware, as appropriate to its media type, to terminate the call as a multipoint call. The call manager must also free the memory that it allocated earlier, in ProtocolCmMakeCall, for its per-party state that is pointed to by CallMgrPartyContext . Failure to properly release, deallocate, or otherwise deactivate those resources causes a memory leak.

After the call has been terminated with the network, any close data has been sent, and any resources at CallMgrPartyContext have been freed, the call manager must call NdisCmDeactivateVc. This notifies NDIS and the underlying miniport driver, if any, to expect no further transfers on the given VC.

Examples

To define a ProtocolCmCloseCall function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a ProtocolCmCloseCall function that is named "MyCmCloseCall", use the PROTOCOL_CM_CLOSE_CALL type as shown in this code example:

PROTOCOL_CM_CLOSE_CALL MyCmCloseCall;

Then, implement your function as follows:

_Use_decl_annotations_
NDIS_STATUS
 MyCmCloseCall(
    NDIS_HANDLE  CallMgrVcContext,
    NDIS_HANDLE  CallMgrPartyContext,
    PVOID  CloseData,
    UINT  Size
    )
  {...}

The PROTOCOL_CM_CLOSE_CALL function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the Use_decl_annotations annotation to your function definition. The Use_decl_annotations annotation ensures that the annotations that are applied to the PROTOCOL_CM_CLOSE_CALL function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.

For information about Use_decl_annotations, see Annotating Function Behavior.

Requirements

Requirement	Value
Minimum supported client	Supported for NDIS 6.0 and NDIS 5.1 drivers (see ProtocolCmCloseCall (NDIS 5.1)) in Windows Vista. Supported for NDIS 5.1 drivers (see ProtocolCmCloseCall (NDIS 5.1)) in Windows XP.
Target Platform	Windows
Header	ndis.h (include Ndis.h)
IRQL	<= DISPATCH_LEVEL

Share via