IRP_MJ_WRITE (FS and filter drivers)

When Sent

The I/O Manager or a file system driver sends the IRP_MJ_WRITE request. This request can be sent, for example, when a user-mode application calls a Win32 function such as WriteFile or when a kernel-mode component calls ZwWriteFile.

Operation: File System Drivers

The file system driver should extract and decode the file object to determine the parameters and minor function code.

For MDL write requests, the file system should check the minor function code to determine which operation is requested. The following are the valid minor function codes, which can be used only for cached file I/O:

  • IRP_MN_COMPLETE
  • IRP_MN_COMPLETE_MDL
  • IRP_MN_COMPLETE_MDL_DPC
  • IRP_MN_COMPRESSED
  • IRP_MN_DPC
  • IRP_MN_MDL
  • IRP_MN_MDL_DPC
  • IRP_MN_NORMAL

For more information about how to handle this IRP, study the FASTFAT sample that is included in the Windows Driver Kit (WDK).

Operation: Legacy File System Filter Drivers

The filter driver should perform any needed processing and, depending on the nature of the filter, perform one of the following actions:

  • Complete or fail the IRP, or
  • Pass the IRP down to the next-lower driver on the stack.

Parameters

A file system or filter driver calls IoGetCurrentIrpStackLocation for the given IRP to get a pointer to its own stack location in the IRP. In the following parameters, Irp points to the IRP and IrpSp points to the IO_STACK_LOCATION. The driver can use the information that is set in the following members of the IRP and the IRP stack location to process a create request:

  • DeviceObject is a pointer to the target device object.

  • Irp->AssociatedIrp.SystemBuffer points to a system-supplied buffer to be used as an intermediate system buffer, if the DO_BUFFERED_IO flag is set in DeviceObject->Flags. Otherwise, this member is set to NULL.

  • Irp->IoStatus points to an IO_STATUS_BLOCK structure that receives the final completion status and information about the requested operation. If the IRP_MJ_WRITE request fails, the file system's write dispatch routine returns an error NTSTATUS value, and the value of Irp->IoStatus.Information is undefined and shouldn't be used.

  • Irp->MdlAddress is the address of a memory descriptor list (MDL) that describes the pages to which the data is to be written.

  • IrpSp->FileObject points to the file object that is associated with DeviceObject. If the FO_SYNCHRONOUS_IO flag is set in IrpSp->FileObject->Flags, the file object was opened for synchronous I/O.

    The IrpSp->FileObject parameter contains a pointer to the RelatedFileObject field, which is also a FILE_OBJECT structure. The RelatedFileObject field of the FILE_OBJECT structure isn't valid during the processing of IRP_MJ_WRITE and shouldn't be used.

  • IrpSp->Flags: If the SL_FORCE_DIRECT_WRITE flag is set, kernel-mode drivers can write to volume areas that they normally can't write to because of direct write blocking. Direct write blocking was implemented for security reasons in Windows Vista and later operating systems. This flag is checked both at the file system layer and storage stack layer. For more information about direct write blocking, see Blocking Direct Write Operations to Volumes and Disks. The SL_FORCE_DIRECT_WRITE flag is available in Windows Vista and later versions of Windows.

  • IrpSp->MajorFunction is set to IRP_MJ_WRITE.

  • IrpSp->MinorFunction specifies the operation being requested and contains one of the following values. If a minor function code isn't specified, the operation is a standard write (equivalent to IRP_MN_NORMAL).

    MinorFunction Description
    IRP_MN_NORMAL The write request is for a standard write operation
    IRP_MN_DPC The write request is from a DPC routine
    IRP_MN_MDL Returns an MDL that describes the file's cached data in Irp->MdlAddress; the caller uses this MDL to write data directly to the cache
    IRP_MN_COMPLETE Not used by itself; only occurs in combination with at least IRP_MN_MDL. See Remarks.
    IRP_MN_COMPRESSED The write request is for a compressed file
    IRP_MN_MDL_DPC The write request is from a DPC routine and returns an MDL that describes the file's cached data in Irp->MdlAddress
    IRP_MN_COMPLETE_MDL Indicates that the caller, who used the MDL to write data directly to the cache, finished using the MDL
    IRP_MN_COMPLETE_MDL_DPC Indicates that the caller, who used the MDL to write data directly to the cache, finished using the MDL; the write request is from a DPC routine
  • IrpSp->Parameters.Write.ByteOffset is a LARGE_INTEGER variable that specifies the starting byte offset within the file of the data to be written.

    Under certain circumstances, this parameter might contain a special value. For example, when true, the following condition indicates that the current end of file should be used instead of an explicit file offset value: IrpSp->Parameters.Write.ByteOffset.LowPart == FILE_WRITE_TO_END_OF_FILE and IrpSp->Parameters.Write.ByteOffset.HighPart == -1

  • IrpSp->Parameters.Write.Key is the key value associated with a byte-range lock on the target file.

  • IrpSp->Parameters.Write.Length is the length in bytes of the data to be written. If the write operation is successful, the number of bytes written is returned in the Information member of the IO_STATUS_BLOCK structure pointed to by Irp->IoStatus.

Remarks

File systems round write and read operations at end of file up to a multiple of the sector size of the underlying file storage device. When filters process preread or prewrite operations, those filters that allocate and swap buffers need to round up the size of an allocated buffer to a multiple of the sector size of the associated device. If they don't, the length of data transferred from the underlying file system exceeds the allocated length of the buffer. For more information about swapping buffers, see swapBuffers Minifilter Sample.

The following bullets describe a standard write versus an IRP-based MDL write:

  • To perform a standard write:

    1. The issuer constructs an IRP with MajorFunction = IRP_MJ_WRITE, MinorFunction = IRP_MN_NORMAL (that is, 0) and provides the data to write in Irp->AssociatedIrp.SystemBuffer.
    2. When they send the IRP to the file system, the data to write is already in the IRP. So the write is complete when the file system finishes processing the IRP; for example, by copying the data from the buffer to the cache for a cached write.
  • To perform an IRP-based MDL write:

    1. The issuer constructs an IRP with MajorFunction = IRP_MJ_WRITE, MinorFunction = IRP_MN_MDL, but doesn't provide a data buffer. They send this IRP to the file system.
    2. The file system constructs an MDL, places it in the IRP, and completes the IRP.
    3. The issuer uses that MDL to copy data directly into the file’s cache.
    4. When the issuer is done copying data into the cache, they construct another IRP with MajorFunction = IRP_MJ_WRITE, MinorFunction = (IRP_MN_MDL | IRP_MN_COMPLETE) and send that to the file system.
    5. The file system frees the MDL, and the write operation is now complete.

See also

CcMdlWriteComplete

CcPrepareMdlWrite

FLT_IO_PARAMETER_BLOCK

IO_STACK_LOCATION

IO_STATUS_BLOCK

IoGetCurrentIrpStackLocation

IRP

IRP_MJ_READ

IRP_MJ_WRITE (WDK Kernel Reference)

ZwWriteFile