OID_GEN_RECEIVE_SCALE_PARAMETERS_V2

The OID_GEN_RECEIVE_SCALE_PARAMETERS_V2 OID is sent to RSSv2-capable miniport drivers to set run-time parameters, other than the indirection table, for a scaling entity. OID_GEN_RECEIVE_SCALE_PARAMETERS_V2 replaces the OID_GEN_RECEIVE_SCALE_PARAMETERS OID from RSSv1 and is not visible to NDIS Light Weight Filters (LWFs) before NDIS 6.80. This OID is a Regular OID and can be issued as a Query or Set request. It is issued at IRQL == PASSIVE_LEVEL. It can target a given VPort, when the NDIS_OID_REQUEST_FLAGS_VPORT_ID_VALID flag is set at NIC switch creation. Otherwise, it targets the physical NIC in the Native RSS case.

As a Query, NDIS and overlying drivers can use OID_GEN_RECEIVE_SCALE_PARAMETERS_V2 to query the RSS parameters of a NIC. NDIS returns an NDIS_RECEIVE_SCALE_PARAMETERS_V2 structure that defines the current RSS parameters.

As a Set, the purpose of this OID is to perform the following actions:

• Initially configure the scaling entity (a miniport adapter in Native RSS mode or a VPort in VMQ mode).
• Enable or disable RSS.
• When in RSS mode, perform non-timing-critical management functions such as changing the hash key, hash type and hash function, number of queues, or number of indirection table entries for the scaling entity.

Remarks

Enabling RSS and setting RSS parameters can be performed in one step.. After the upper layer enables RSS using this OID, the initial state of the scaling entity is as follows:

• The primary processor becomes inactive.
• The default processor becomes active.
• All the ITEs become active.
• The miniport driver starts calculation of the RSS hash, setting of the corresponding OOB for all packets, and directing packets to a processor specified by the indirection table entry or default processor parameter.

After RSS is enabled, the upper layer issues the OID_GEN_RSS_SET_INDIRECTION_TABLE_ENTRIES OID to move ITEs to different processors. In RSSv2, the DefaultQueue and PrimaryProcessor are also moved to a different processor using OID_GEN_RSS_SET_INDIRECTION_TABLE_ENTRIES.

During the process of disabling RSS, the upper layer will point all ITEs to the primary processor before invoking this OID to turn RSS off. After this point, receive traffic should target the primary processor. However, miniport drivers should not expect the disabling of RSS before VPort deletion. The upper layer can set the receive filter on the VPort to zero, thus ensuring that no receive traffic is flowing through the VPort, then proceed to delete the VPort without disabling RSS.

The upper layer will ensure that important invariants are not violated before performing management functions. For example:

• Before changing the number of queues, the upper layer will ensure that the indirection table does not reference more processors than configured for a VPort. Before changing the number of indirection table entries for VMMQ-RESTRICTED adapters, the upper layer will ensure that the content of the indirection table is normalized to the power of 2.

Error conditions and status codes

This OID returns the following status codes when an error occurs:

Requirements

Version: Windows 10, version 1709 Header: Ntddndis.h (include Ndis.h)

See also

• Receive Side Scaling Version 2 (RSSv2)
• OID_GEN_RECEIVE_SCALE_PARAMETERS
• NDIS_RECEIVE_SCALE_PARAMETERS_V2
• OID_GEN_RSS_SET_INDIRECTION_TABLE_ENTRIES