Wlan Test - Query All Reported Oids (26568a8c-39cb-46ef-b8b8-e1bc835b05c1)

Article
05/18/2022

This automated test verifies the driver reports mandatory OIDs as supported

Note

Microsoft will be accepting 802.11ad WDI drivers for HLK certification for the Windows 10 Fall Creators Update (1709) to facilitate broad distribution and testing among Windows Insiders and ecosystem partners. However, due to the lack of broad testing of 802.11ad WDI functionality, this feature is enabled as a developer preview for the Windows 10, version 1709 release.

If a problem is encountered with 802.11ad functionality, please contact your 802.11ad IHV partner for support assistance. Microsoft is committed to supporting 802.11ad Wi-Fi connectivity in a future version of Windows 10 in order to enable wireless docking and other scenarios.

Test details


Specifications	Device.Network.WLAN.SupportConnectionToAP.ConnectionToAP
Platforms	Windows 10, client editions (x86) Windows 10, client editions (x64) Windows 10, mobile edition (Arm)
Supported Releases	Windows 10 Windows 10, version 1511 Windows 10, version 1607 Windows 10, version 1703 Windows 10, version 1709 Windows 10, version 1803 Windows 10, version 1809 Windows 10, version 1903 Next update to Windows 10
Expected run time (in minutes)	1
Category	Development
Timeout (in minutes)	5
Requires reboot	false
Requires special configuration	true
Type	automatic

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Device.Network additional documentation

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The test completes the following:

Queries NDIS for all implemented OIDs that the driver returned during miniport initialization.
Compares the resulting list against all required OIDS listed here: https://msdn.microsoft.com/library/windows/hardware/ff571095(v=vs.85).aspx.

The test will fail if any of the required OIDs listed on MSDN are not reported by the driver during miniport initialization.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Parameters

Parameter name	Parameter description
EnableTracing	Enable Tracing
queryTestDeviceID	Device id of device under test

Share via