Wlan Test - Connect to a WPA2 PSK AES AP with Sleep cycle (2ae2cb26-ea04-4def-8e07-ae7b92e61e1b)
Connect to a specified WPA2PSK AES network with sleep resume (Defaults: SSID=kitstestssid Passphrase=password SleepDurationInSec=20, SleepCycleIterations=2)
Note
Microsoft will be accepting 802.11ad WDI drivers for HLK certification for the Windows 10 Fall Creators Update (1709) to facilitate broad distribution and testing among Windows Insiders and ecosystem partners. However, due to the lack of broad testing of 802.11ad WDI functionality, this feature is enabled as a developer preview for the Windows 10, version 1709 release.
If a problem is encountered with 802.11ad functionality, please contact your 802.11ad IHV partner for support assistance. Microsoft is committed to supporting 802.11ad Wi-Fi connectivity in a future version of Windows 10 in order to enable wireless docking and other scenarios.
Test details
| Specifications |
|
| Platforms |
|
| Supported Releases |
|
| Expected run time (in minutes) | 5 |
| Category | Scenario |
| Timeout (in minutes) | 15 |
| Requires reboot | false |
| Requires special configuration | true |
| Type | automatic |
Additional documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
More information
Parameters
| Parameter name | Parameter description |
|---|---|
| EnableTracing | Enable Tracing |
| WPA2_PSK_AES_SSID | SSID of a WPA2_PSK_AES network to connect to (MUST be WPA2 PSK AES) |
| WPA2_PSK_Password | Password for WPA2_PSK network |
| SleepDurationInSec | The amount of time in seconds the device will asleep |
| SleepCycleIterations | The number of sleep/wake cycles to do |
| queryTestDeviceID | Device id of device under test |
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.