ALUA MPIO Test (LOGO)

  • Article

This test verifies whether storage devices support the ALUA feature properly.

Asymmetric logical unit access (ALUA) occurs when the access characteristics of one port may differ from those of another port. Therefore, for storage devices with ALUA feature implemented, there may be at least two target port groups.

The test checks whether the device declares support to ALUA by checking the INQUIRY TPGS field before additional testing. If the TGPS field is not 0, then the storage devices at least support REPORT TARGET PORT GROUPS, and the Report Target Port Groups test will be done. If TPGS is 2 or 3, then the storage devices support both REPORT TARGET PORT GROUPS and explicit SET TARGET PORT GROUPS. In this case, the test will perform the Report Target Port Groups test and Set Target Port Groups test.

Warning

   This test depends on the SCSI Compliance Test 2.0 binary. Please make sure that LUN0 is the largest non-boot LUN before running the test.

 

Test details

   
Specifications
  • Device.Storage.Hd.Alua.Compliance
Platforms
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 5
Category Development
Timeout (in minutes) 300
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Hard Disk Drive Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Storage Testing.

More information

Parameters

Parameter name Parameter description
DiskDeviceObjLink Assigned by Create Storage Parameters.
WDKDeviceID Instance path of device to test
LoggingVerbosity LoggingVerbosity: Detail of logging. Levels are cumulative. 0 = Assertions and results. 1 = Details (default). 2 = CDBs , data, and sense info. 3 = Debug and detailed Mode page information. 4 = Memory usage
ScenarioId Scenario test name.
LLU_NetAccessOnly User account for accessing test fileshare.
LLU_LclAdminUsr User account for running the test.
OperationId operation option
Destructive (0,1) 0=Passive, 1=Destructive