NDISTest 6.5 - [2 Machine] - PM_PowerStateTransition

  • Article

This test verifies that the miniport driver behaves properly when the PC comes out of a power management scheme. All the possible combinations of the power management schemes are tested. If AutoWake is not supported by the operating system, all the combinations are not tested. In that case only one power management scheme (Deepest Standby) is tested. Hardware vendors should verify that their adapters on machines support autowake and at least S1, S3, and S4 sleep states. If your machine takes a significantly long time to standby or hibernate, increase the timer (hot parameter Amount of Time to Sleep) appropriately.

Test details

   
Specifications
  • Device.Network.LAN.PM.PowMgmtNDIS
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 15
Category Development
Timeout (in minutes) 900
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting LAN Testing.

More information

Parameters

Parameter name Parameter description
queryTestDeviceID
SupportDeviceGuid0
ClientMessageDeviceGuid
ServerMessageDeviceGuid
TestScript comma separated list of test jobs to run