NDISTest 6.5 - [2 Machine] - QosRemoteSettings

  • Article

This test ensures that m_Dut can parse IEEE DCBX packets sent by m_Sut and correctly indicate these new settings via NDIS_STATUS_QOS_REMOTE_PARAMETERS_CHANGE. TestConflict: Ensures that m_Dut resolves the conflict when both local and remote flow control and classification settings are available. TestNoRemoteSettings: Ensures that m_Dut only takes into account the local settings when there are no remote settings available.

Test details

   
Specifications
  • Device.Network.LAN.DCB.DCB
Platforms
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 5
Category Development
Timeout (in minutes) 300
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

This test must only be run on a Windows Server edition adapter configuration. The DUT mused have a QoS-capable network adapter. The network adapter in the SUT must allow IEEE 802.1AB LLDP packets sent from the operating system to pass through.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting LAN Testing.

More information

Parameters

Parameter name Parameter description
queryTestDeviceID
SupportDeviceGuid0
ClientMessageDeviceGuid
ServerMessageDeviceGuid
TestScript comma separated list of test jobs to run