Wlan Test - MAC Randomization test - (WoW64 for Arm64) (b08f847c-5bc1-45ea-b2da-3fa007429964)

  • Article

This automated test checks to make sure the wlan device has properly implemented the MAC address randomization feature.

Test details

   
Specifications
  • Device.Network.WLAN.SupportMACAddressRandomization.MACAddressRandomization
Platforms
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 10
Category Scenario
Timeout (in minutes) 0
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

This test is only valid on systems with a Wireless LAN adapter that has implemented WLAN MAC Address Randomization. This test does the following:

  1. enables the mac randomization option
  2. connectes to a wpa2psk network
  3. disables the mac randomization option
  4. connectes to a wpa2psk network

Note

  Possible Failure Points:   - Adapter failed to set MAC Address randomization feature   - Adapter failed to connect to wpa2psk network   - Adapter failed to clear MAC Address randomization feature

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

More information

Parameters

Parameter name Parameter description
EnableTracing Enable Tracing
WPA2_PSK_AES_SSID SSID of a WPA2_PSK_AES network to connect to (MUST be WPA2 PSK AES)
WPA2_PSK_Password Password for WPA2_PSK network
queryTestDeviceID Device id of device under test