WLAN Roaming Tests - WPA2_ENTERPRISE_PEAP_TKIP_AES

This test suite validates that the WLAN adapter roams correctly.

Test details

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

• Device.Network additional documentation

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test performs the following actions:

• Configures two routers, that are named Router 0 and Router 1, as follows:
  • Router 0 - 2.4Ghz : WPA2Enterprise(PEAP-MSCHAPv2)/TKIP [Preferred PHY G/Channel 1]
  • Router 0 - 5Ghz : WPA2Enterprise(PEAP-MSCHAPv2)/AES [Preferred PHY A/Channel 44]
  • Router 1 - 2.4Ghz : WPA2Enterprise(PEAP-MSCHAPv2)/TKIP [Preferred PHY G/Channel 6]
  • Router 1 - 5Ghz : WPA2Enterprise(PEAP-MSCHAPv2)/AES [Preferred PHY N/Channel 36]
  • Router 0 and Router 1 share the same SSID for their 2.4Ghz radios.
  • Router 0 and Router 1 share the same SSID for their 5Ghz radios.
  • For roaming purposes, network address translation (NAT) is enabled on both routers.
• Execute the SuddenLossOfSignal() test steps as described in WLAN Roaming Tests - Custom Configuration
• Execute the GradualLossOfSignal() test steps as described in WLAN Roaming Tests - Custom Configuration

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Parameters