NDISTest 6.5 - [1 Machine] - QosCapabilities

  • Article

This test is automated.

Note

   Adapter Configuration: DUT - QoS capable adapter

Test Cases:

  • Capability Test

    • Ensure that QoS keyword is advertised and OID_QOS_HARDWARE_CAPABILITIES returns valid values.

  • Keyword (Disable-Enable) Test

    • QoS is enabled when the QoS keyword is enabled.

    • QoS is disabled when the QoS keyword is disabled.

    • QoS is disabled when the QoS keyword is set to an invalid enum value.

    • QoS is disabled when the QoS keyword is missing.

  • Checks enforced (in each of the following cases, assume QoS capable adapter):

    • NUM_TRAFFIC_CLASSES_MIN_VALUE = 3 through 8

      • No error is flagged if this value is greater than 8

    • NUM_ETS_CAPABLE_TRAFFIC_CLASSES = 2 or more, no higher bound check

    • NUM_PFC_ENABLED_TRAFFIC_CLASSES = 1 or more, no higher bound check

    • If *QOS keyword is absent, QoS is assumed as disabled.

    • If *QOS keyword has invalid setting value, QoS is assumed as disabled.

    • When QoS is disabled, miniport driver must -

      • Return NDIS_STATUS_SUCCESS for OID_QOS_HARDWARE_CAPABILITIES and valid capability data in NDIS_QOS_CAPABILITIES structure

      • Return NDIS_STATUS_SUCCESS for OID_QOS_CURRENT_CAPABILITIES and ZEROED data in NDIS_QOS_CAPABILITIES structure

    • NDIS_QOS_CAPABILITIES_STRICT_TSA_SUPPORTED is advertised

    • Only known capability flags are advertised

      • NDIS_QOS_CAPABILITIES_STRICT_TSA_SUPPORTED

      • NDIS_QOS_CAPABILITIES_MACSEC_BYPASS_SUPPORTED

      • NDIS_QOS_CAPABILITIES_CEE_DCBX_SUPPORTED

      • NDIS_QOS_CAPABILITIES_IEEE_DCBX_SUPPORTED

 

Test details

   
Specifications
  • Device.Network.LAN.DCB.DCB
Platforms
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 5
Category Development
Timeout (in minutes) 300
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting LAN Testing.

More information

Parameters

Parameter name Parameter description
queryTestDeviceID
TestScript comma separated list of test jobs to run