Hybrid Power-Up In Standby Test

  • Article

This test checks to make sure that the device supports power up in standby. The test will check the identify device page to verify that the Power up in standby feature is supported, and will turn power up in standby off and on to ensure that it is reporting the correct results. It will also check if an explicit spin-up if the feature is enabled is required. If the device sets that flag, this test will also fail.

Test details

   
Specifications
  • Device.Storage.Hd.Sata.HybridInformation.BasicFunction
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 10
Category Compatibility
Timeout (in minutes) 600
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

More information

Parameters

Parameter name Parameter description
Verbosity Verbosity of log output. 0 is least verbose, 4 is most verbose
Scenario Scenario that test targets to.
WDKDeviceID Instance path of device to test
LLU_NetAccessOnly User account for accessing test file share.
LLU_LclAdminUsr User account for running the test.
StorageDriveNumber Drive number of device to test

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.