PDD_GETSCANLINE callback function (ddrawint.h)

The DdGetScanLine callback function returns the number of the current physical scan line.

Syntax

PDD_GETSCANLINE PddGetscanline;

DWORD PddGetscanline(
  PDD_GETSCANLINEDATA unnamedParam1
)
{...}

Parameters

unnamedParam1

Points to a DD_GETSCANLINEDATA structure in which the driver returns the number of the current scan line.

Return value

DdGetScanLine returns one of the following callback codes:

Remarks

If the monitor is not in vertical blank, the driver should write the scan line value in the dwScanLine member of the DD_GETSCANLINEDATA structure at pGetScanLine. The number must be in the range [0, n], where scan line 0 is the first visible scan line and scan line n is the last visible scan line on the screen. The driver should then set DD_OK in the ddRVal member of DD_GETSCANLINEDATA and return DDHAL_DRIVER_HANDLED.

The scan line is indeterminate if a vertical blank is in progress. In this situation, the driver should set ddRVal to DDERR_VERTICALBLANKINPROGRESS and return DDHAL_DRIVER_HANDLED.

Requirements

See also

DD_GETSCANLINEDATA