Extended Error Information Detection Locations
The following table lists the Extended Error Information detection locations for Windows XP.
| Code | Name | Description and parameters |
|---|---|---|
| 10 | DealWithLRPCRequest10 | The server is not listening. The first parameter is a ULONG indicating whether RpcServerListen has been called, and the second parameter is the number of registered auto listen interfaces. |
| 11 | DealWithLRPCRequest20 | Allocation/initialization of a server-side call object failed. |
| 12 | WithLRPCRequest30 | A call could not be queued on the server due to lack of memory. |
| 13 | WithLRPCRequest40 | A thread could not be created on the server. |
| 20 | LrpcMessageToRpcMessage10 | RPC could not allocate memory on the server to hold the message sent from the client. The first parameter is a ULONG with the amount of memory in bytes that was requested. |
| 21 | LrpcMessageToRpcMessage20 | An LPC call to NtReadRequestData failed. The first parameter is a ULONG with the NTSTATUS code returned from LPC. |
| 22 | LrpcMessageToRpcMessage30 | A reply could not be sent from the server to the client. The first parameter is a ULONG describing the NTSTATUS with which the operation failed. |
| 30 | DealWithRequestMessage10 | The requested interface is not available on the server. The first parameter is a ULONG describing the internal RPC identifier of the interface. This identifier does not correspond to any part of the interface name or interface UUID. |
| 31 | DealWithRequestMessage20 | The server is not listening. |
| 32 | DealWithRequestMessage30 | A dispatch to the server routine failed. |
| 40 | CheckSecurity10 | The security callback for the given interface returned a value other than RPC_S_OK. The returned value is in the first parameter, which is a ULONG. |
| 50 | DealWithBindMessage10 | Saving the token of the client failed. |
| 51 | DealWithBindMessage20 | Information from the client token could not be retrieved. The first parameter is a ULONG and contains the error with which the operation failed. |
| 52 | DealWithBindMessage30 | Allocating of a server-side security context failed. The first parameter is a ULONG with the number of bytes that RPC tried to allocate. |
| 53 | DealWithBindMessage40 | Inserting the server security context into the dictionary failed due to low memory. |
| 54 | DealWithBindMessage50 | Processing the presentation context sent by the client failed. Either the presentation context was invalid or there was not enough memory. |
| 55 | DealWithBindMessage60 | An improperly formed request was received by the server from the client. The first parameter is a ULONG with the total number of contexts. The second parameter is a ULONG with the expected size of the request. The third parameter is a ULONG with the actual size of the request. |
| 60 | FindServerCredentials10 | Getting the server credentials failed. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 61 | FindServerCredentials20 | A call to the security interface AcquireCredentialsHandle failed. The error code is the error returned from AcquireCredentialsHandle. The first parameter is a Unicode string to the principal name. The second is a Unicode string to the security package name. |
| 62 | FindServerCredentials30 | A call to the security interface AcquireCredentialsHandle failed. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcquireCredentialsHandle. |
| 70 | AcceptFirstTime10 | A call to the security interface AcceptSecurityContext failed on the first leg. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. Third parameter is ULONG with the context requirements. |
| 71 | AcceptThirdLeg10 | A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. Third parameter is ULONG with the result from GetLastError. |
| 72 | AcceptThirdLeg20 | A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the error returned from AcceptSecurityContext. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 73 | AcceptFirstTime20 | A call to the security interface AcceptSecurityContext failed on the first leg. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcceptSecurityContext. |
| 74 | AcceptThirdLeg40 | A call to the security interface AcceptSecurityContext failed on second or subsequent legs. The error code is the mapped by RPC error code. The first parameter is a ULONG with the error code returned from AcceptSecurityContext. |
| 80 | AssociationRequested10 | The client has requested to establish a connection on an existing association but this association does not exist on the server. The first parameter is the association identifier requested by the client (ULONG). The second and third parameters are ULONGLONG and are a debug identifier of the client which depends on the protocol sequence. |
| 81 | AssociationRequested20 | Could not allocate association on the server due to lack of memory. The first parameter is a ULONG of the size necessary for the association block. |
| 82 | AssociationRequested30 | RPC failed to acquire the credentials for the server. The first parameter is ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 90 | CompleteSecurityToken10 | A call to the security interface CompleteAuthToken failed. The error is the error returned by CompleteAuthToken. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 91 | CompleteSecurityToken20 | A call to the security interface CompleteAuthToken failed. The first parameter is a ULONG with the error from the CompleteAuthToken error. |
| 100 | AcquireCredentialsForClient10 | A call to the security interface AcquireCredentialsHandle failed on the client side. The error is the error returned by AcquireCredentialsHandle. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 101 | AcquireCredentialsForClient20 | Error while acquiring the credentials on the client. The specified security package could not be found. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 102 | AcquireCredentialsForClient30 | The version of the SCHANNEL credentials given to RPC was invalid. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 110 | InquireDefaultPrincName10 | A call to the security interface QueryCredentialsAttributes failed. The error is the error returned by QueryCredentialsAttributes. The first parameter is a ULONG with the authentication service. |
| 111 | InquireDefaultPrincName20 | A call to the security interface QueryCredentialsAttributes failed. The error is the RPC error that was mapped to the security error. The first parameter is a ULONG with the original security error. |
| 120 | SignOrSeal10 | A failure occurred while trying to sign or encrypt a message. The error is the original security error code. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. |
| 130 | VerifyOrUnseal10 | A failure occurred while trying to verify the signature or decrypt a message. The first parameter is the original security error code. The second parameter is a ULONG with the authentication service. The third parameter is a ULONG with the authentication level. |
| 131 | VerifyOrUnseal20 | The third leg of authentication has failed, and a subsequent attempt to verify or unseal a packet also failed. The first parameter is a ULONG with the error with which the third leg failed. |
| 140 | InitializeFirstTime10 | A call to the security interface InitializeSecurityContext failed on first leg of security context negotiation. The error is the error returned by InitializeSecurityContext. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is a Unicode string with the specified server principal name. The fourth parameter is the context requirements. |
| 141 | InitializeFirstTime20 | A call to the security interface InitializeSecurityContext failed on first leg of security context negotiation. The error is the error RPC mapped to the security error returned by InitializeSecurityContext. The first parameter is a ULONG with the original security error. |
| 142 | InitializeFirstTime30 | A call to the security interface QueryContextAttributes failed during first leg of security context negotiation. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is a ULONG with the context requirements. |
| 150 | InitializeThirdLeg10 | A call to the security interface InitializeSecurityContext failed on second or subsequent legs of security context negotiation. The error is the error returned by InitializeSecurityContext. The first parameter is a ULONG with the authentication service. The second parameter is a ULONG with the authentication level. The third parameter is the context attributes. |
| 151 | InitializeThirdLeg20 | A call to the security interface InitializeSecurityContext failed on second or subsequent legs of security context negotiation. The error is the error RPC mapped to the security error returned by InitializeSecurityContext. The first parameter is a ULONG with the original security error. |
| 152 | InitializeThirdLeg30 | A security context was established, but the caller asked RPC for RPC_C_IMP_LEVEL_IDENTIFY impersonation, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context. |
| 153 | InitializeThirdLeg40 | A security context was established, but the caller asked RPC for RPC_C_IMP_LEVEL_DELEGATE impersonation, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context. |
| 154 | InitializeThirdLeg50 | A security context was established, but the caller asked RPC for mutual authentication, and the security context does not support that. The first parameter is a ULONG with SEC_E_SECURITY_QOS_FAILED. The second parameter is the impersonation type asked by the caller. The third parameter is the attributes of the security context. |
| 155 | InitializeThirdLeg60 | A call to the security interface QueryContextAttributes failed during certificate verification. The first parameter is a ULONG with the original error returned from the security interface. |
| 160 | ImpersonateClient10 | A call to the security interface ImpersonateSecurityContext failed. The first parameter is a ULONG with the original error returned from the security interface. The second parameter is the authentication service. The third parameter is the authentication level. |
| 170 | DispatchToStub10 | No type was registered for this interface. |
| 171 | DispatchToStub20 | This interface has been unregistered. |
| 180 | DispatchToStubWorker10 | A call to an autolisten interface was made, but the number of calls active inside this autolisten interface has exceeded the maximum number of calls for this interface. The first parameter is a ULONG with the number of active calls inside the autolisten interface. The second parameter is a ULONG with the maximum number of calls allowed for the autolisten interface. |
| 181 | DispatchToStubWorker20 | A call was made, but the server is not listening. |
| 182 | DispatchToStubWorker30 | A call was made but the number of maximum calls allowed for the server was exceeded. |
| 183 | DispatchToStubWorker40 | A call was made but the procedure requested does not exist for this interface. |
| 190 | NMPOpen10 | A call to CreateFile to open a named pipe to the server failed. The first parameter is a Unicode string to the pipe. The second parameter is a ULONG with the Security QOS flags for the pipe. |
| 191 | NMPOpen20 | The server did not accept the named pipe connection for a given time out. The first parameter is a Unicode string to the pipe. |
| 192 | NMPOpen30 | The network address passed to RPC was invalid. The first argument is a Unicode string with the network address. |
| 193 | NMPOpen40 | A call to CreateFile to open a named pipe to the server failed. The error code is the error RPC mapped to the error code from CreateFile. |
| 200 | NMPSyncSend10 | A call to WriteFile failed. Parameters 1, 2 and 4 are values internal to RPC. The third parameter is the length of the data given to WriteFile. |
| 210 | NMPSyncSendReceive10 | A call to TransactNamedPipe failed. Parameters 1 and 2 are internal to RPC. The third parameter is the size of the data that were sent. |
| 220 | NMPSyncSendReceive20 | The data read from the pipe was invalid, or not all data could be read. Parameters 1 and 2 are internal to RPC. The third parameter is a ULONG with the data that were sent to the server. |
| 221 | NMPSyncSendReceive30 | The data read from the pipe was invalid, or not all data could be read. |
| 230 | COSend10 | An attempt to send data failed. The error is the original error code from the IO system. Parameters 1 and 2 are internal to RPC. The third parameter is the size of the data RPC was trying to send. |
| 240 | COSubmitRead10 | RPC failed to submit a read for data to the IO system. The error code is the original error from the IO system. |
| 250 | COSubmitSyncRead10 | RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system. |
| 251 | COSubmitSyncRead20 | RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system. |
| 260 | COSyncRecv10 | RPC tried to receive data from the IO subsystem, but the operation failed. The error is the original error from the IO system. |
| 270 | WSCheckForShutdowns10 | RPC received a shutdown notification from the server. |
| 271 | WSCheckForShutdowns20 | RPC received a fault packet from the server. The first parameter is a ULONG with the status from the fault packet. The second parameter is the number of iterations completed. |
| 272 | WSCheckForShutdowns30 | RPC received a fault packet from the server. The first parameter is a ULONG with the status from the fault packet. The second parameter is the number of iterations completed. |
| 273 | WSCheckForShutdowns40 | RPC received unrecognized packet from the server. The first parameter is a ULONG with the type of the packet. The second parameter is the number of iterations completed. |
| 274 | WSCheckForShutdowns50 | RPC failed to submit a receive for data to the IO subsystem. The error is the original error from the IO system. The first parameter is the number of completed iterations. |
| 280 | WSSyncSend10 | An error was encountered while RPC was checking for shutdowns from the server. |
| 281 | WSSyncSend20 | RPC failed to send data. The error is the error received from the IO system. |
| 282 | WSSyncSend30 | RPC failed to send data. |
| 290 | WSSyncRecv10 | RPC failed to receive data from Windows Sockets (Winsock). The error is the error received from Winsock. If the error is 0, The first parameter is the number of bytes received. |
| 291 | WSSyncRecv20 | The time out for the connection was exceeded while trying to receive data from Winsock. |
| 292 | WSSyncRecv30 | RPC failed to receive data from Winsock. The error is the error received from Winsock. |
| 300 | WSServerListenCommon10 | RPC could not open a socket. The first parameter is a ULONG with the address family for the socket. The second parameter is a ULONG with the socket type. Third parameter is a ULONG with the protocol. |
| 301 | WSServerListenCommon20 | RPC called the Winsock listen API but it failed. The first parameter is a ULONG with the original error code from Winsock. The second parameter is internal to RPC. Third parameter is a ULONG with the queue size. |
| 302 | WSServerListenCommon30 | RPC could not open a socket. The error code is the RPC error that was mapped to the original Winsock error. |
| 310 | WSOpen10 | RPC could not open a socket. The first parameter is a ULONG with the address family for the socket. The second parameter is a ULONG with the socket type. Third parameter is a ULONG with the protocol. |
| 311 | WSOpen20 | RPC failed to bind or connect to the server. The first parameter is the server port. The second and third parameters are ULONGs that contain portions of the server IP address. If the protocol is IPv4, the third parameter contains the full IP address, and the second is 0. If the protocol is IPv6, the third parameter contains the last 8 bytes from the server IP address and the second parameter contains the previous 8 bytes. |
| 312 | WSOpen30 | RPC could not open a socket. The error code is the RPC error that was mapped to the original Winsock error. |
| 313 | WSOpen40 | RPC failed to bind or connect to the server. The error code is the RPC error that was mapped to the original Winsock error. |
| 314 | WSOpen50 | RPC initiated a connect operation to the server but the call time out expired before the connect completed. The first parameter is a ULONG with the time out. |
| 315 | WSOpen60 | RPC failed to bind the socket. The error code is the original error code received from Winsock. |
| 316 | WSOpen70 | RPC failed to retrieve the address of the ConnectEx function from Winsock. Chances are the Winsock provider does not support ConnectEx. |
| 317 | WSOpen80 | RPC called ConnectEx but it failed. The error is the original Winsock error code. |
| 318 | WSOpen90 | RPC called ConnectEx but it failed. The error is the original NTSTATUS error code. |
| 320 | NextAddress10 | RPC called Winsock's getaddrinfo API to resolve the server's name, but this failed. The error code is the original error code received from Winsock. The first parameter is a Unicode string with the server DNS name that RPC attempted to resolve. |
| 321 | NextAddress20 | RPC called Winsock's getaddrinfo API but failed because of insufficient memory. |
| 322 | NextAddress30 | RPC called Winsock's getaddrinfo API but failed for reasons other than insufficient memory. |
| 323 | NextAddress40 | RPC has reached the end of the list of IP addresses resolved for a given DNS name. |
| 330 | WSBind10 | RPC failed to allocate a port from the reserved range specified by the firewall settings. Most likely the firewall settings are invalid. |
| 331 | WSBind20 | RPC failed to set a socket option. |
| 332 | WSBind30 | RPC failed to bind to a port. Most likely there were no ports available. |
| 333 | WSBind40 | RPC failed to bind to a port due to low memory. |
| 334 | WSBind50 | RPC failed to bind to a port for other reasons. The error is the original error code received from Winsock. |
| 335 | WSBind45 | RPC failed to bind to a port because the port is already in use. The first parameter is a ULONG with the port RPC is trying to use. |
| 340 | IPBuildAddressVector10 | RPC failed to allocate memory to build an address vector. The first parameter is a ULONG with the original error from the allocation. |
| 350 | GetStatusForTimeout10 | A call time out was hit. The first parameter is a hex constant. The second parameter is a ULONG with the call time out in milliseconds. |
| 351 | GetStatusForTimeout20 | A time out was hit while binding to the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit. |
| 360 | OSF_CCONNECTION__SendFragment10 | A time out was hit while sending/receiving data to/from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit. |
| 361 | OSF_CCONNECTION__SendFragment20 | A time out was hit while sending/receiving data to/from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit. |
| 370 | OSF_CCALL__ReceiveReply10 | A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft. |
| 371 | OSF_CCALL__ReceiveReply20 | A time out was hit while receiving data from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit. |
| 380 | OSF_CCALL__FastSendReceive10 | A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft. |
| 381 | OSF_CCALL__FastSendReceive20 | A failure was hit while receiving data from the server. The first parameter is a ULONG with a value internal to Microsoft. |
| 382 | OSF_CCALL__FastSendReceive30 | A time out was hit while receiving data from the server. The first parameter is ULONG with a large hex constant. The second parameter is a ULONG with the time out in milliseconds that was hit. |
| 390 | LRPC_BINDING_HANDLE__AllocateCCall10 | A network address was specified in the LRPC binding handle that was different than the local computer name. LRPC supports only calls with an empty network address or a network address that is the same as the local computer name. The first parameter is a Unicode string with the network address from the binding handle. The second parameter is a Unicode string with the local computer name. |
| 391 | LRPC_BINDING_HANDLE__AllocateCCall20 | RPC encountered a failure while resolving a dynamic endpoint. Error code is the original error code with which resolving failed. The first parameter is a ULONG with the first DWORD of the Interface UUID of the interface on which the call was made. |
| 400 | LRPC_ADDRESS__ServerSetupAddress10 | The server endpoint length exceeded the maximum allowed endpoint length. The first parameter is a Unicode string with the endpoint name. The second parameter is a ULONG with the calculated length of that string. Third parameter is a ULONG with the maximum allowed length for the endpoint. |
| 410 | LRPC_ADDRESS__HandleInvalidAssociationReference10 | The client has sent a packet to a server endpoint that is no longer valid. The first parameter is a ULONG with an index internal to Microsoft. |
| 420 | InitializeAuthzSupportIfNecessary10 | RPC failed to load Authz.dll. The error code is the original error code from LoadLibrary. The first parameter is a Unicode string with the Authz.dll string. |
| 421 | InitializeAuthzSupportIfNecessary20 | RPC failed to retrieve the address of a routine from Authz.dll. The error is the original error code from GetProcAddress. The first parameter is an ANSI string with the name of the routine that RPC could not get the procedure address for. |
| 430 | CreateDummyResourceManagerIfNecessary10 | RPC failed to retrieve the address of a routine from Authz.dll. The error is the original error code from GetProcAddress. The first parameter is an ANSI string with the name of the routine that RPC could not get the procedure address for. |
| 431 | CreateDummyResourceManagerIfNecessary20 | RPC called AuthzInitializeResourceManager, but this failed. The error code with which it failed is in the Status field. |
| 440 | LRPC_SCALL__GetAuthorizationContext10 | RPC failed to impersonate the client. The status field is the original error with which the impersonation call failed. The first parameter is a ULONG with the value of the ImpersonateOnReturn parameter. The second parameter is a ULONGLONG with a value internal to Microsoft. |
| 441 | LRPC_SCALL__GetAuthorizationContext20 | RPC failed to open the current thread token. Status is the original error with which opening the thread token failed. The first parameter is the identifier of the thread for which the operation failed. |
| 442 | LRPC_SCALL__GetAuthorizationContext30 | RPC failed to retrieve an authorization context from the anonymous user SID. Status is the error from the AuthzInitializeContextFromSid function. The first parameter is a ULONG with the thread identifier of the thread. The second parameter is a ULONGLONG with a value internal to Microsoft. |
| 450 | SCALL__DuplicateAuthzContext10 | RPC called AuthzInitializeContextFromAuthzContext but it failed. The Status field is the original error from the AuthzInitializeContextFromAuthzContext API. The first parameter is a ULONG with the identifier of the thread on which the error occurred. The second parameter is a ULONGLONG with a value internal to Microsoft. |
| 460 | SCALL__CreateAndSaveAuthzContextFromToken10 | RPC called AuthzInitializeContextFromToken but it failed. The Status field is the original error from the AuthzInitializeContextFromToken API. The first parameter is a ULONG with the identifier of the thread on which the error occurred. The second parameter is a ULONGLONG with a value internal to Microsoft. |
| 470 | SECURITY_CONTEXT__GetAccessToken10 | RPC called a security provider to retrieve the context attributes, but this operation failed (QueryContextAttributes). The first parameter is a ULONG with the original error from the SSPI API. The second parameter is a ULONG with the authentication service. Third parameter is a ULONG with the authentication level. |
| 471 | SECURITY_CONTEXT__GetAccessToken20 | RPC called a security provider to retrieve the context token, but this operation failed (QuerySecurityContextToken). The first parameter is a ULONG with the original error from the SSPI API. The second parameter is a ULONG with the authentication service. Third parameter is a ULONG with the authentication level. |
| 480 | OSF_SCALL__GetAuthorizationContext10 | RPC failed to impersonate the client. The status field is the original error with which the impersonation call failed. The first parameter is a ULONGLONG with a value internal to Microsoft. The second parameter is a ULONGLONG with 0. |
| 500 | EpResolveEndpoint10 | RPC has reached the end of the endpoint list returned by the server. The first parameter is a Unicode string with the protocol sequence. The second parameter is a Unicode string with the network address of the server. Third parameter is a ULONG with the first DWORD of the interface UUID for the interface for which the call is made. Fourth parameter is a ULONG. The high word of the ULONG is the index of the last endpoint returned. The low word is the total number of endpoints returned by the server. |
| 501 | EpResolveEndpoint20 | RPC failed to resolve an endpoint, because an error was returned from the server. The first parameter is a Unicode string with the protocol sequence. The second parameter is a Unicode string with the network address of the server. Third parameter is a ULONG with the first DWORD of the interface UUID for the interface for which the call is made. Fourth parameter is a ULONGLONG value internal to Microsoft. |
| 510 | OSF_SCALL__GetBuffer10 | RPC failed to allocate memory. The first parameter is a ULONG with the amount of memory RPC tried to allocate. |
| 520 | LRPC_SCALL__ImpersonateClient10 | RPC called NtImpersonateAnonymousToken, but it failed. The first parameter is a ULONG with the original error code returned from NtImpersonateAnonymousToken. The second parameter is a ULONG with the current thread identifier. |
| 530 | SetMaximumLengths10 | RPC called a security provider to retrieve the security context attributes (QueryContextAttributes) but it failed. The first parameter is a ULONG with the original error code returned from the security provider. The second parameter is the result of GetLastError after QueryContextAttributes failed. Third parameter is a ULONG with the authentication service. Fourth parameter is a ULONGLONG value internal to Microsoft. |
| 540 | LRPC_CASSOCIATION__ActuallyDoBinding10 | Either initializing asynchronous RPC failed, or establishing a connection between the client and the server failed. The first parameter is a Unicode string with the endpoint. |
| 541 | LRPC_CASSOCIATION__ActuallyDoBinding20 | RPC failed to establish a connection between the client and the server. The first parameter is a Unicode string with the endpoint. |
| 542 | LRPC_CASSOCIATION__ActuallyDoBinding30 | RPC failed to bind to the server because the server returned an error. The error returned from the server is in the Status field. |
| 543 | LRPC_CASSOCIATION__ActuallyDoBinding40 | RPC failed to send a bind packet to the server. The original error code from LPC is a ULONG on the first parameter. |
| 550 | LRPC_CASSOCIATION__CreateBackConnection10 | RPC failed to establish a connection between the client and the server. The first parameter is a Unicode string with the endpoint. |
| 551 | LRPC_CASSOCIATION__CreateBackConnection20 | RPC failed to send a bind packet to the server. The original error code from LPC is a ULONG on the first parameter. |
| 552 | LRPC_CASSOCIATION__CreateBackConnection30 | RPC failed to bind to the server because the server returned an error. The error returned from the server is in the Status field. |
| 560 | LRPC_CASSOCIATION__OpenLpcPort10 | RPC failed to resolve the server principal name to a SID. The first parameter is a ULONG with the original error from LookupAccountName. |
| 561 | LRPC_CASSOCIATION__OpenLpcPort20 | RPC tried to bind to the server, but could not because the server rejected the connection. The Status field is the error with which the server rejected the connection. The first parameter is a ULONG with STATUS_PORT_CONNECTION_REFUSED. |
| 562 | LRPC_CASSOCIATION__OpenLpcPort30 | RPC tried to bind to the server, but could not because the server was not available. The first parameter is a ULONG with STATUS_PORT_CONNECTION_REFUSED. |
| 563 | LRPC_CASSOCIATION__OpenLpcPort40 | RPC tried to establish a connection with the server but an error occurred. The first parameter is a ULONG with the original error returned from LPC. |
| 570 | RegisterEntries10 | RPC tried to register an endpoint in the endpoint mapper database but an error occurred. The first parameter is a ULONG with the error code with which the operation failed. |
| 571 | RegisterEntries20 | RPC tried to register an endpoint in the endpoint mapper database but an error occurred. The first parameter is a ULONG with the remapped error code. |
| 580 | NDRSContextUnmarshall2_10 | The client passed a context handle to the server that the server doesn't recognize. Either this context handle doesn't exist on the server, or the given interface uses strict_context_handle and the given context handle was created on an interface other than the one on which this call is made. The first and second parameters are ULONGLONGs that taken together uniquely identify a context handle. |
| 581 | NDRSContextUnmarshall2_20 | The context handle passed from the client to the server is currently being deleted by the server. The first and second parameters are ULONGLONGs that taken together uniquely identify a context handle. |
| 582 | NDRSContextUnmarshall2_30 | RPC failed to allocate memory for new context handle. The first parameter is a ULONG to the size of the block that RPC tried to allocate. |
| 583 | NDRSContextUnmarshall2_40 | RPC tried to lock the context handle for exclusive or shared use but the operation failed. |
| 584 | NDRSContextUnmarshall2_50 | RPC tried to add the context handle to the list of active context handles but the operation failed due to insufficient memory. |
| 590 | NDRSContextMarshall2_10 | RPC failed while it was either trying to allocate a unique identifier for the context handle or while it was trying to add the context handle to the list of active context handles. |
| 600 | WinsockDatagramSend10 | The Winsock WSASendTo function failed. The first and second parameters identify the address to which the datagram was addressed. |
| 601 | WinsockDatagramSend20 | RPC attempted to receive data from the server, but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft. |
| 610 | WinsockDatagramReceive10 | RPC attempted to post a receive to Winsock but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft. |
| 620 | WinsockDatagramSubmitReceive10 | RPC attempted to post a receive to Winsock but the operation failed. The Status field contains the original error returned from Winsock. The first parameter is a ULONG with a value internal to Microsoft. |
| 630 | DG_CCALL__CancelAsyncCall10 | The asynchronous call was canceled. The first parameter is a ULONG that contains 0 if the call was canceled non-abortively and non-zero otherwise. |
| 640 | DG_CCALL__DealWithTimeout10 | A cancel was issued for an RPC call and the time out for the cancel expired. The first parameter is a ULONG with the time out for the cancel. The second parameter is a ULONG with the time elapsed since the cancel was issued. |
| 641 | DG_CCALL__DealWithTimeout20 | RPC hit a time out limit. The first parameter is a ULONG with the time out limit. The second parameter is the time elapsed since the last receive. |
| 642 | DG_CCALL__DealWithTimeout30 | RPC encountered a time out while talking with the server. |
| 650 | DG_CCALL__DispatchPacket10 | A packet was received from the server, but the client has already encountered a cancel time out for the call. The first parameter is a ULONG with the time out for the cancel. The second parameter is a ULONG with the time elapsed since the cancel was issued. |
| 660 | DG_CCALL__ReceiveSinglePacket10 | RPC attempted to receive data from the server, but the operation failed. |
| 661 | DG_CCALL__ReceiveSinglePacket20 | If the client gets an ICMP reject packet it may decide to auto reconnect and retry the call. This error record is added at the beginning of the auto reconnect. The first parameter is a ULONG with the auto reconnect flag for the connection. The second parameter is a ULONG with the buffer flags/ |
| 662 | DG_CCALL__ReceiveSinglePacket30 | RPC failed to receive data from the server. |
| 670 | WinsockDatagramResolve10 | RPC failed to resolve a DNS name to an IP address. The first parameter is a Unicode string with the DNS name on which resolution was attempted. |
| 680 | WinsockDatagramCreate10 | RPC failed to open a datagram socket. The first parameter is a ULONG with the address family. The second parameter is a ULONG with the protocol. |
| 690 | TCP_QueryLocalAddress10 | The getsockname API failed. The first parameter is a ULONGLONG internal to Microsoft. The second parameter is the original error returned from Winsock. |
| 691 | TCP_QueryLocalAddress20 | The setsockopt (with SO_UPDATE_ACCEPT_CONTEXT option) API failed. The first parameter is a ULONGLONG internal to Microsoft. The second parameter is the original error returned from Winsock. |
| 700 | OSF_CASSOCIATION__ProcessBindAckOrNak10 | RPC received a packet from the server that was below the minimum acceptable length for this type of packet. The first parameter is a ULONG with the length of the packet in bytes. The second parameter is a ULONG with the minimum acceptable length of the packet in bytes. |
| 701 | OSF_CASSOCIATION__ProcessBindAckOrNak20 | RPC failed to bind to the server because the server returned an error. The first parameter is a ULONG with the error returned from the server. The second parameter is a ULONG with the number of failures attempting to bind to this server/endpoint. |
| 710 | MatchMsPrincipalName10 | Decoding the principal name failed. |
| 720 | CompareRdnElement10 | The CertGetNameString call failed. The original error returned from CertGetNameString is encoded as a ULONG in the first parameter. |
| 730 | MatchFullPathPrincipalName10 | Processing of the principal name failed. |
| 731 | MatchFullPathPrincipalName20 | RPC failed to find a matching principal name. The first parameter is a ULONG with the original error code from the crypto APIs. |
| 732 | MatchFullPathPrincipalName30 | The CertOpenStore call for the CA store failed. |
| 733 | MatchFullPathPrincipalName40 | The CertOpenStore call for the ROOT store failed. |
| 734 | MatchFullPathPrincipalName50 | RPC encountered an error processing the certificate. The first parameter is a ULONG with an additional error code. |
| 740 | RpcCertGeneratePrincipalName10 | RPC encountered an error while generating the server principal name. |
| 741 | RpcCertGeneratePrincipalName20 | RPC encountered an error while generating the server principal name. |
| 742 | RpcCertGeneratePrincipalName30 | The CertGetNameString call failed. The first parameter is a ULONG with the original error code from CertGetNameString. |
| 750 | RpcCertVerifyContext10 | The CertOpenStore call for the CA store failed. |
| 751 | RpcCertVerifyContext20 | The CertGetCertificateChain call failed. |
| 752 | RpcCertVerifyContext30 | The CertVerifyCertificateChainPolicy call failed. |
| 753 | RpcCertVerifyContext40 | The CertVerifyCertificateChainPolicy call succeeded but an error was returned in the PolicyStatus. The first parameter is a ULONG with the result of GetLastError. |
| 761 | OSF_BINDING_HANDLE__NegotiateTransferSyntax10 | RPC has encountered an error using a particular endpoint or the list of endpoints was exhausted. The first parameter is a Unicode string with the last tried endpoint. |