Point Constructores

Referencia

Definición

Espacio de nombres:: System.Drawing

Ensamblado:: System.Drawing.Primitives.dll

Ensamblado:: System.Drawing.dll

Ensamblado:: netstandard.dll

Importante

Parte de la información hace referencia a la versión preliminar del producto, que puede haberse modificado sustancialmente antes de lanzar la versión definitiva. Microsoft no otorga ninguna garantía, explícita o implícita, con respecto a la información proporcionada aquí.

Inicializa una nueva instancia de la estructura Point con las coordenadas especificadas.

Sobrecargas

Point(Size)	Inicializa una nueva instancia de la estructura Point desde Size.
Point(Int32)	Inicializa una nueva instancia de la estructura Point con las coordenadas que especifica un valor entero.
Point(Int32, Int32)	Inicializa una nueva instancia de la estructura Point con las coordenadas especificadas.

Point(Size)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inicializa una nueva instancia de la estructura Point desde Size.

public:
 Point(System::Drawing::Size sz);

public Point (System.Drawing.Size sz);

new System.Drawing.Point : System.Drawing.Size -> System.Drawing.Point

Public Sub New (sz As Size)

Parámetros

sz: Size

Size que especifica las coordenadas del nuevo objeto Point.

Ejemplos

En el ejemplo de código siguiente se muestra cómo usar el Equality operador y cómo construir un Point a partir de uno Size o dos enteros. También muestra cómo usar las X propiedades y Y . Este ejemplo está diseñado para usarse con Windows Forms. Pegue el código en un formulario que contenga un botón denominado Button1y asocie el Button1_Click método con el evento del Click botón.

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }

private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }
}

Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Se aplica a

Point(Int32)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inicializa una nueva instancia de la estructura Point con las coordenadas que especifica un valor entero.

public:
 Point(int dw);

public Point (int dw);

new System.Drawing.Point : int -> System.Drawing.Point

Public Sub New (dw As Integer)

Parámetros

dw: Int32

Entero de 32 bits que especifica las coordenadas del nuevo objeto Point.

Ejemplos

En el ejemplo de código siguiente se muestra cómo usar los Point constructores y y Size.Size la System.Drawing.ContentAlignment enumeración . Para ejecutar este ejemplo, pegue este código en un formulario Windows Forms que contenga una etiqueta denominada Label1y llame al InitializeLabel1 método en el constructor del formulario.

void InitializeLabel1()
{
   // Set a border.
   Label1->BorderStyle = BorderStyle::FixedSingle;
   
   // Set the size, constructing a size from two integers.
   Label1->Size = System::Drawing::Size( 100, 50 );
   
   // Set the location, constructing a point from a 32-bit integer
   // (using hexadecimal).
   Label1->Location = Point(0x280028);
   
   // Set and align the text on the lower-right side of the label.
   Label1->TextAlign = ContentAlignment::BottomRight;
   Label1->Text = "Bottom Right Alignment";
}

private void InitializeLabel1()
{
    // Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle;

    // Set the size, constructing a size from two integers.
    Label1.Size = new Size(100, 50);

    // Set the location, constructing a point from a 32-bit integer
    // (using hexadecimal).
    Label1.Location = new Point(0x280028);

    // Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight;
    Label1.Text = "Bottom Right Alignment";
}

Private Sub InitializeLabel1()

    ' Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle

    ' Set the size, constructing a size from two integers.
    Label1.Size = New Size(100, 50)

    ' Set the location, constructing a point from a 32-bit integer
    ' (using hexadecimal).
    Label1.Location = New Point(&H280028)

    ' Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight
    Label1.Text = "Bottom Right Alignment"
End Sub

Comentarios

Los 16 bits de orden bajo del dw parámetro especifican la coordenada x horizontal y los 16 bits superiores especifican la coordenada y vertical para el nuevo Point.

Se aplica a

Point(Int32, Int32)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inicializa una nueva instancia de la estructura Point con las coordenadas especificadas.

public:
 Point(int x, int y);

public Point (int x, int y);

new System.Drawing.Point : int * int -> System.Drawing.Point

Public Sub New (x As Integer, y As Integer)

Parámetros

x: Int32

Posición horizontal del punto.

y: Int32

Posición vertical del punto.

Ejemplos

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }

private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }
}

Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Se aplica a

Compartir a través de

Point Constructores

Definición

Sobrecargas

Point(Size)

Parámetros

Ejemplos

Se aplica a

Point(Int32)

Parámetros

Ejemplos

Comentarios

Se aplica a

Point(Int32, Int32)

Parámetros

Ejemplos

Se aplica a

Recursos adicionales